E 5.906.1.0/12.10
410
3/2-Solenoid Directional Valve
SAE 8-Cartridge – 350 bar
WK08C-13
Spool Type - Direct Acting
19 l/min
350 bar
In the de-energized mode the valve
allows ow from port 2 to 1 and not in
the other direction, while blocking ow at
port 3.
When energized the valve allows ow
from port 3 to 2 or from 2 to 3, while
blocking ow at port 1.
Function
Features
Δp optimized, for optimized pressure drop from port 2 to1
Exposed surfaces zinc-plated and corrosion-proof
All valve parts made of high-strength steel with hardened and ground
components to ensure minimal wear and extended service life
Coil seals protect the solenoid system
Wide variety of coils and connectors available
Excellent switching performance by high power HYDAC solenoid
speciFications
Operating pressure: max. 350 bar
Nominal ow: max. 19 l/min
Internal leakage: max. 90 cm³/min at 250 bar and 34 mm²/s
Media operating temperature range: min. -20 °C to +100 °C
Ambient temperature range: min. -20 °C to +60 °C
Fluids: Hydraulic oil to DIN 51524 part 1 and 2
Viscosity: min. 10 mm²/s to max. 420 mm²/s
Filtration: Class 21/19/16 according to
ISO 4406 or cleaner
Installation: no orientation restrictions
Material: Valve body: steel
Spool: hardened and
ground steel
Seals: NBR (standard)
FKM (optional)
Back-up rings: PTFE
Cavity: FC08-3 UNF
Weights: Valve complete: 0.37 kg
Coil only: 0.19 kg
Electrics
Response time: Energized: approx. 25 ms
De-energized: approx. 40 ms
typical 24 V DC-coil
Type of voltage: DC solenoid, AC voltage is rectied
using a bridge rectier built into the coil
Current draw at 20 °C: 1.5 A at 12 V DC
0.8 A at 24 V DC
Voltage tolerance: ±15% of nominal
Coil duty rating: Continuous up to 115%
of nominal voltage at max. 60 °C
ambient temperature
E 5.906.1.0/12.10
411
WK08C - 13 M - C - N - 24 DG
Basic model
Directional spool valve UNF
Cavity 08-3, Function code C
Type
13 = standard, with low leakage
Option
Omission = no option
M = manual override
Body and Ports*
C = Cartridge only
Seals
N = NBR (standard)
V = FKM (optional)
Coil voltage
DC: 12 = 12 V DC
24 = 24 V DC
AC: 115 = 115 V AC (internally full wave rectied)
230 = 230 V AC (internally full wave rectied)
other voltages on request
Coil connector
DC: DG = DIN connector to EN175301-803
DT = AMP Junior Timer, 2 pole, radial
DK = Kostal threaded connector M27 x 1
DL = Leadwires (2) - 475mm (18”) long
DN = Deutsch connector, 2 pole
AC: AG = DIN connector to EN 175301-803
other connectors on request
model code
dimensions
millimeter (inch)
Subject to technical modications.
cavity
FC08-3
millimeter (inch)
Subject to technical modications.
After loosening mounting
nut, coil can be rotated
through 360° and removed.
7/8 hex
Torque 25
+5
Nm
Manual override,
with HNBR rubber cap
Torque 4
+2
Nm
thick
without M.o.
perFormance
HYDAC Fluidtechnik GmbH
Justus-von-Liebig-Str.
D-66280 Sulzbach/Saar
Tel: 0 68 97 /509-01
Fax: 0 68 97 /509-598
E-Mail: utec@hydac.com
NOTE
The information in this brochure relates to
the operating conditions and applications
described. For applications or operating
conditions not described, please contact the
relevant technical department.
Subject to technical modications.
* Standard line bodies
Code Part No. Material Ports Pressure
FH083 560922 Steel, zinc-plated 3/8 BSP 350 bar
FH083 3011427 Alu, clear anodized 3/8 BSP 245 bar
other housings on request
Standard models
Model code Part No.
WK08C-13-C-N-12DG 3381283
WK08C-13-C-N-24DG 3257855
other models on request
Seal kits
Code Part No. Material
Seal kit FS083-N 3054795 NBR
Seal kit FS083-V 2591059 FKM
Form tools
Tool Part No.
Countersink 175644
Reamer 175645
Pressure drop
Measured at ν = 33 mm²/s
T
Oil
= 46 °C
Flow rate
