E 5.196.1/12.10
152
Pressure Compensator
Spool Valve, Direct Acting,
Normally Closed
Metric Cartridge – 250 bar
DWM08130Z
Up to 40 l/min
Up to 250 bar
The pressure compensator DW08130Z
is a normally closed, direct-acting, spring
loaded ow control valve which operates
smoothly.
By maintaining a constant differential
between inlet and outlet pressure of an
orice (ports 1 and 3 of the pressure
compensator), a constant ow rate is
maintained (independently of the load
pressure). As soon as the pressure
differential exceeds the value pre-set by
the spring force, the control piston opens
an orice cross-section and diverts the
surplus ow which is not required at the
consumer, through a third port.
The pressure compensator can, for
example, be used when raising variable
loads at the same velocity. Together with
a proportional ow control valve it can
be used as a 3-way proportional ow
regulator.
In load sensing circuits with a xed
displacement pump, if the consumer
cannot take the ow, the valve allows
the oil to ow back to tank and therefore
vents the whole system.
Features
z Used as a load sensing valve to control the ow rate of consumers independently
of the pressure
z Versions available for different control pressure differentials
z Hydrodynamic damping
z Excellent stability throughout pressure and ow range
z Excellent dynamic performance
z All surfaces zinc-plated and corrosion-proof
z All valve parts made of high-strength steel with hardened and ground components
to ensure minimal wear and extended service life
z Rigid design using one-piece body minimizes the effect of eccentricities in cavity
and maximizes reliability
z Reliable operation due to integral stroke limitation
z Internal venting of the load sensing line when valve is open
Function
sPeciFications
Operating pressure: max. 250 bar
Nominal ow: max. 40 l/min
Media operating temperature range: min. -30 °C to max. +80 °C
Ambient temperature range: min. -30 °C to max. +80 °C
Fluid: Hydraulic oil to DIN 51524 Part 1 + 2
Viscosity: min. 10 mm²/s to max. 420 mm²/s
Filtration: Class 21/19/16 to ISO 4406
or cleaner
MTTF
d
: 150 years
Installation: No orientation restrictions
Materials: Valve body: high tensile steel
Piston: hardened and
ground steel
Seals: NBR (standard)
FKM (optional, temperature
ranges to -20 °C)
Back-up rings:PTFE
Cavity: Metric 08130
Weight: 0.15 kg