E 5.192.2/12.10
158
Pressure Compensator,
Downstream
Spool Valve,
Direct Acting, Normally Open
Metric Cartridge – 250 bar
DWM12130Y
Up to 130 l/min
Up to 250 bar
The pressure compensator DWM12130Y
is a normally open, direct-acting, spring
loaded ow control valve.
By maintaining a constant differential
between inlet and outlet pressure of an
orice (ports 1 and 3 of the pressure
compensator), a constant ow rate is
maintained (independently of the load
pressure). As soon as the pressure
differential exceeds the value pre-set by
the spring force, the control piston reduces
an orice cross-section. The pressure
compensator can, for example, be used
when lowering variable loads at the same
velocity. Together with a proportional ow
control valve it can be used as a 2-way
proportional ow regulator.
In a load sensing system in which several
consumers are operated in parallel, each
one can be individually speed-controlled.
Features
z Used to control the ow rate of consumers independently of the load pressure
z Versions for two different control pressure differentials and for ow rates up to
max. 130 l/min
z Excellent stability throughout pressure and ow range
z Excellent dynamic performance
z All surfaces zinc-plated and corrosion-proof
z All valve parts made of high-strength steel with hardened and ground components to
ensure minimal wear and extended service life
z Rigid design using one-piece body minimizes the effect of eccentricities in cavity and
maximizes reliability
z Reliable operation due to integral stroke limitation
Function
sPeciFications
Operating pressure: max. 250 bar
Nominal ow: max. 130 l/min
Control accuracy +/- 10%
Media operating temperature range: min. -20 °C to max. +80 °C
Ambient temperature range: min. -20 °C to max. +80 °C
Fluid: Hydraulic oil to DIN 51524 Part 1 + 2
Viscosity: min. 10 mm²/s to max. 420 mm²/s
Filtration: Class 21/19/16 to ISO 4406
or cleaner
MTTF
d
: 150 years
Installation: No orientation restrictions
Materials: Valve body: high tensile steel
Piston: hardened and ground steel
Seals: FKM
Back-up rings: PTFE
Cavity: Metric 12130
Weight: 0.35 kg