E .0/12.10
148
Overpressure Protection Valve
Poppet Type, Direct Acting
Cartridge – 500 bar
DSR5E
z To shut off consumers when certain pressures are reached
z Excellent dynamic performance
z Excellent stability throughout ow range
z All valve parts made of high-strength steel with hardened and ground components to
ensure minimal wear and extended service life
z Adjustable across entire pressure range
z Various pressure ranges up to 350 bar
Operating pressure: max. 500 bar, can be set up to 350 bar
Nominal ow: max. 15 l/min
Setting pressure ranges: 100 / 250 / 350 bar
Cut-out pressure tolerance: +/- 5 bar
Internal leakage: < 5 drops/min = 0.35 ml/min
Media operating temperature range: min. -20 °C to max. +100 °C
Ambient temperature range: min. -20 °C to max. +100 °C
Fluid: Hydraulic oil to DIN 51524 Part 1 + 2
Viscosity: min. 2.8 mm²/s to max. 800 mm²/s
Filtration: Class 21/19/16 to ISO 4406
or cleaner
MTTF
d
: 150 years
Installation: No orientation restrictions, preferably
horizontal
Materials: Valve body: steel
Piston: hardened and
ground steel
Seals: FKM (standard)
NBR (optional, temperature
range to -30 °C)
Back-up rings: PTFE
Cavity: 06020
Weight: 0.38 kg
The overpressure protection valve DSR5E
is a direct acting, spring-loaded poppet
valve. When the pressure rises above the
pre-set spring tension, the valve closes
and the oil ow to the consumer port 2 is
blocked.
Up to 15 l/min
Up to 500 bar
E .0/12.10
149
Overpressure protection valve, metric
E = Cartridge
01 = standard
(determined by manufacturer)
100 = 0 to 100 bar
250 = 0 to 250 bar
350 = 0 to 350 bar
V = adjustable
110 = 110 bar
Other settings on request
06020
DSR5E-010/100V 710280
DSR5E-010/250V 710281
Other models on request
R06020-01X-01 275266 Steel, zinc-plated G3/8 350 bar
R06020-10X-01 276842 Steel, zinc-plated G3/8 350 bar
SEAL KIT 06020-NBR 3119017
SEAL KIT 06020-FKM 3262477
Countersink 170033
Reamer 1000768
Tap 1002648
Plug gauge 168840
Q [l/min]
∆p [bar]
SW30 metric
torque 25
+5
Nm
int. hex.
SW4 metric
SW12 metric
tting depth
Justus-von-Liebig-Str.
Tel: 0 68 97 / 509-01
Fax: 0 68 97 / 509-598
E-Mail: utec@hydac.com
The information in this brochure relates to
the operating conditions and applications
described.
For applications or operating conditions
not described, please contact the relevant
technical department.
Subject to technical modications.
Measured at
n = 38 mm²/s, T
oil
= 43 °C
Millimeter (Inch)
Subject to technical modications
Millimeter (Inch)
Subject to technical modications
