E 5.162.6/01.13
130
Pressure Reducing Valve
Spool Type, Direct-Acting
Metric Cartridge – 500 bar
DMVE
Up to 30 l/min
Up to 500 bar
The pressure reducing valve DMVE is a
direct-acting, spring-loaded spool valve. Its
function is to maintain a constant pressure
at the consumer.
In the normal position, pressure port 2
is connected to consumer port 1. The
pressure build-up at the consumer acts on
the face of the control piston and moves it
upwards against the set spring force.
Therefore the inow is throttled at port
2 just enough to satisfy the consumer's
demand - without pressure increase.
There is an additional function of outlet
pressure relief: if the pressure across
consumer port 1 rises above the control
pressure due to external force, the control
piston is pushed further against the spring
and relieves the consumer to tank port 3.
FEATURES
z Excellent dynamic performance
z Hardened and ground valve components to ensure minimal wear and extended
service life
z Low pressure drop by CFD optimized ow path
z Low hysteresis and excellent stability throughout the ow range
FUNCTION
SPECIFICATIONS
Operating pressure: max. 500 bar (port 2)
Nominal ow: 30 l/min (pressure-dependent -
> 350 bar = 6 l/min)
Pressure ranges: 50 bar
140 bar
Media operating temperature range: min. -20 °C to max. +120 °C
Ambient temperature range: min. -20 °C to max. +120 °C
Operating uid: Hydraulic oil to DIN 51524 Part 1 and 2
Viscosity range: min. 2.8 mm²/s to max. 380 mm²/s
Filtration: Class 21/19/16 according to ISO 4406 or
cleaner
MTTF
d
: 150 years (see "Conditions and
instructions for valves" in brochure 5.300)
Installation: no orientation restrictions
Materials: Valve body: high tensile steel
Piston: hardened and
ground steel
Seals: FKM (standard)
NBR (optional, media
temperature range
-30 °C to +100 °C)
Back-up rings: PTFE
Cavity: 08030
Weight: 0.23 to 0.45 kg, depending on model
Adjustment device
Valve body
Spring
Control piston