3/2 Solenoid Directional Valve
Spool type, direct acting
Cartridge-Minivalve – 350 bar
WK06C-01
FEATURES
- All exposed surfaces corrosion-proof
- Al
l valve parts made of high-strength steel with hardened and ground components
to ensure minimal wear and extended service life
- Coil seals protect the solenoid system
- Coil easy to exchange and pivotable
SPECIFICATIONS
Operating pressure: max. 350 bar
Nominal flow: max. 10 l/min
Leakage: < max. 90 cm³/min at 207 bar and
28 mm²/s
Temperature range of operating fluid: Min. – 30°up to max. + 120°C
Ambient temperature range: Min. – 30°up to max. + 60°C
Fluid: Hydraulic fluid to DIN 51524 T1 + T2
Viscosity range: min. 7,4 mm²/s up to max. 420 mm²/s
Filtration: Class 21 / 19 /16 according
to ISO 4406 or cleaner
MTTF
d
: 150
years
Installation: no orientation restrictions
Materials: Valve body: high tensile steel
Piston: hardened and ground steel
Seals: NBR (Standard)
FKM (optional, temperature
range to -20°C)
Support rings: PTFE
Cavity: FC06-3
Weight: Complete valve: 0,175 kg
Coil only: 0,088 kg
Electrical data
Type of voltage: DC coil, AC voltage is rectified by a
rectifier built-in the plug
Nominal current at 20°C: 984 mA at 12 V DC
492 mA at 24 V DC
Voltage tolerance: +/- 15% of Coil voltage
Coil duty rating: 100% continuous up to max.
115% of Coil voltage at 60°C
ambient temperature
Switching time: Energized: approx. 30 - 60 ms
De-energized: approx. 20 - 40 ms
FUNCTION
In de-energized mode there is free
flow from port 1 to 2 and in the
opposite direction. Port 3 is closed.
If energized, the valve allows flow
from port 2 to 3 and in the opposite
direction. Port 1 is closed.
SYMBOL
up
to 10 l/min
up to 350 bar
1
2
3
D 5.149.0 /12.10
UNF
616
MODEL CODE
WK06C – 01M – C – N – 24 DN
Basic model
Directional Spool type, direct acting
Type
01 = Standard
01M = manual override
Body & ports
C = cartridge only
*versions in line bodies on request
Seals
N = NBR (Standard)
V = FKM (optional)
Coil voltage
0 = without coil (with nut and Seals)
DC: 12 = 12 Volt DC voltage
24 = 24 Volt DC voltage
AC: 115 = 105 Volt DC voltage
230 = 205 Volt DC voltage (at AC voltage Plug with
suppressor diode necessary Mat. 2600582)
Coil connector (Coil... 32-1329)
DC: DG = DIN Plug to EN175301-803
DL = Plug with 2 leadwires, 475mm long
DN = Deutsch Plug, axial
DIMENSIONS
Cavity
FC06-3
PERFORMANCE
Measured at 28 mm²/s and T oil = 38°C
HYDAC Fluidtechnik GmbH
Justus-von-Liebig-Str. 5
66280 Sulzbach / Saar
Tel.: 06897 / 509 -0
Fax: 06897 / 509 -598
Email: flutec@hydac.com
Standard models
Cod
e Part No.
WK06C-01-C-N-0 without coil 2610183
(coil please choose from brochure D 5.155.0 )
Other types on request
*Line bodies
Code Part No. Material Ports Pressure
FH063-SS4 2600493 steel, zinc plated SAE-4 420 bar
FH063-AS4 2600492 Alu, anodized SAE-4 245 bar
other line bodies on request
Seal kits
Code Part No.
Seal kit-NBR 2610186
Seal kit-FKM 2610187
All dimensions in inch (mm)
Subject
to technical modification
Tools
Code Part No.
Rougher 2582050
Finisher 2582051
617
