E .0/12.10
190
Flow Control Valve
Spool Type,
Hydraulically Operated
Metric Cartridge - 250 bar
SDH05330
z Flow control is dependent on the viscosity of the oil and the system pressure
z A lock-nut locks the setting
z All exposed surfaces zinc-plated and corrosion-proof
z Hardened and ground control piston to ensure minimal wear and extended service life
z Compact design
Operating pressure: max. 250 bar
Nominal ow: max. 20 l/min
Control pressure: min = P at Port 2 + 5 bar,
max. 250 bar
Media operating temperature range: min. -20 °C to max. +100 °C
Ambient temperature range: min. -20 °C to max. +100 °C
Fluid: Hydraulic oil to DIN 51524 Part 1 + 2
Viscosity: min. 10 mm²/s to max. 380 mm²/s
Filtration: Class 21/19/16 to ISO 4406
or cleaner
MTTF
d
: 150 years
Installation: No orientation restrictions
Materials: Valve body: high tensile steel
Piston: hardened and ground steel
Seals: FKM (standard)
NBR (optional, temperature
range to -30 °C)
Back-up rings: PTFE
Cavity: 05330
Weight: 0.075 kg
The SDH05330 is a hydraulically operated,
spring-loaded, adjustable ow control
valve. In the normal position, the valve is
open and there is ow from port 3 to port
2. When control pressure is applied to port
1, the valve switches into the ow control
position and the ow is reduced.
The ow setting can be adjusted using
the set screw (clockwise to decrease ow,
counter-clockwise to increase ow)
Caution: the control pressure must
generally be bigger than the pressure at
port 2, otherwise the valve will not function.
In order that the valve switches back from
the ow control position to the fully open
position, port 1 must be vented and (at this
moment) there must be no ow through
the valve.
Up to 20 l/min
Up to 250 bar