FEATURES
- Hole pattern to ISO 5781-08, Nominal size 10
- pilot to open check valve
- low flow loss by maximum size bore holes
SPECIFICATIONS
Operating pressure: max. 320 bar
Flow rate: max. 100 l/min
Pilot ration: 3,4 : 1
Operating fluid: hydraulic oil to DIN 51524 part 1 and 2
Operating fluid temp. range: -20°C up to max. +80°C
Ambient temperature range: -20°C up to max. +50°C
Viscosity range: 7,4 – 400 mm²/s is recommended
Filtration: Class 20/18/15 according to
ISO 4406
Installation: no orientation restriction
Hole pattern: according to ISO5781-08
Weight: 3,7 kg
PERFORMANCE
measured at 36 mm²/s and 50°C
The
data in the diagram are valid for the flow from B→A and A→B with an open
valve.
For the flow from ports A→B, with a closed valve please add the cracking pressure
to the data in the diagram.
SYMBOL
up
to 320 bar
up to 100 l/min
FUNCTION
Check valve
pilot to open
Subplate to ISO 5781
VP-RP10
E 5.249.11.0 /08.10
792
MODEL CODE
VP-RP10 35 S01 /V
Name and size
Check valve pilot to open NW 10
Cracking pressure
35 = 3,5 bar
50 = 5,0 bar
Type
S01 = Standard
Seal material
V = Viton (Standard)
N = NBR
DIMENSIONS
Mou
nting plate to ISO 5781-08-07-*-00
1) External leakage line Y 2)
Control port X
3) Outlet port B 4) Inlet port A
5) Mounting plate with O-rings, 2x O-Ring 17,13 x 2,62 Viton
2x O-Ring 5,28 x 1,78 Viton 6) Type plate
Fastening screws: 4x Allen key M10x70, Torque: 40 Nm + 4 Nm
All dimensions in mm. Fastening elements are not in the scope of delivery.
HYDAC Fluidtechnik GmbH
Justus-von-Liebig-Str. 5
66280 Sulzbach / Saar
Tel.: 06897 / 509 -0
Fax: 06897 / 509 -598
Email: flutec@hydac.com
Annotation
The technical information in this
brochure are relating to the operating
conditions and applications.
At deviant applications and/or
operating conditions please contact
the technical dept.
Technical information are
subject to technical modifications.
Standard models Part No.
V
P
-
RP10 35 S01/V 3541184
VP-RP10 50 S01/V 3541188
Other models on request
793
