Proportional Flow control valve
direct acting with transducer
subplate to ISO6263
VP- P2SRR 6
FEATURES
• High flow by optimized casted housing
• Sm
all hysteresis by superfinish of moving parts
• Long life by magnet switching under oil
• Minimal wear by hardened and ground valve piston
• Simple exchangeability by international standardized hole pattern ISO 6263
• electronic control by PEK-SRA s. brochure 5.249.4.0
SPECIFICATIONS
Operating pressure: Ports A, B max. 250 bar
Flow rate: max. 1,5 / 4 / 8 / 16 / l/min
max. 40 l/min in the opposite direction
Hysteresis: (in % of Qmax): < 2,5 %
Repeatability: (in % of Qmax) < +/- 1,0 %
Switching time: ON (0-100%) 180 ms (25-100%) 150 ms
Switching time: OFF (100-0%) 150 ms (100-25%) 120 ms
Temp. range of the operating fluid: -20°C up to +80°C
Ambient temperature range: -10°C up to +50°C
Operating fluid: hydraulic oil to DIN 51524 part 1 a. 2
Viscosity range: 7,4 -10 - 400mm
2
/s is recommended
Fil
tration: Class 18/16/13 (17/15/12) to ISO4406
for flow rates <0,5l/min)
Type of voltage: DC voltage
Nominal current: 0,86 A at 24VDC
Resistance at 20°C: 17,6 Ohm at 24VDC
Coil duty rating: 100% (Continuous)
Electro magnetic
suitability: (EMC) Emissions to EN 50081-1
suitability to EN 50082-2
to Norm 89/336 CEE
IP rating: IP65 (if plug is mounted correctly)
Installation: no orientation restrictions
Note: Bleed system and valve before
setting in motion
Hole pattern: ISO 6263-03-03-0-97
Weight: 2,2 kg
SYMBOL
up
to 16 l/min
up to 250 bar
FUNCTION
The P2SRR6 is a direct acting 2-way
flo
w control valve.
Flows from port A to B are controlled
independently of the pressure. In the
opposite direction there is free flow
trough the check valve. The controlled
flow rate is proportional to the
electrical input signal at the coil.
Analogue to his size the coil creates a
force which pushes the piston against
the spring. Hereby opening diameters
are opened which determine the size
of the flow independent from the
pressure differential
A built-in pressure compensator
enables the regulation independent
from pressure changes from port A to
B.
For the electronical control there are
electronic controls available (see
separate brochures).
E 5.249.3.0 /08.10
734
PERFORMANCE
(measured at 36 mm/s and 50°C)
Flow control Q = f (I)
transducer – electrical connection
Pin
1 Supply 18 ÷ 36 V Pin 8c
Pin 2 Output 2 ÷ 10 V Pin 24a
Pin 3 0 V Pin 22c
Setpoint signal
Pressure differential ∆p /Q
735
MODEL CODE
VP-P2SRR6 L 16 R D01- 24PG /V
Name and size
Proportional flow control valve, size 6
Curve
L = linear
Flow rate
01 =1,5 l/min
04 = 4 l/min (at ∆p=10 bar A-B)
08 = 8 l/min
16 = 16 l/min
Check valve
Type
D01 = Standard type with manual override
Nominal voltage
24= 24 V DC
Coil connector
PG= DIN plug to EN175301-803
Seal material
V= FPM (Standard)
N= NBR (optional)
DIMENSIONS
Hol
e pattern
1) Mounting plate with seals:
2x O-Ring 14 x 2 Viton
2) Proportional coil
3) Transducer
4) DIN plug to EN175301-803
for Prop. coil
5) DIN plug 4 Pin M12 - IP67
PG7 for Transducer
6) Free space f. mounting the
Transducer
7) Free space for mounting
the DIN plug
Fastening screws:
Allen key 4x M5 x 65 (incl.)
Torque: 5 Nm + 0,5 Nm
All dimensions in mm.
Fastening elements are not in
the scope of delivery.
HYDAC Fluidtechnik GmbH
Justus-von-Liebig-Str. 5
66280 Sulzbach / Saar
Tel.: 06897 / 509 -0
Fax: 06897 / 509 -598
Email: flutec@hydac.com
Annotation
The technical information in this
brochure are relating to the operating
conditions and applications.
At deviant applications and/or
operating conditions please contact
the technical dept.
Technical information are
subject to technical modifications.
Standard models P
a
r
t No.
VP-P2SRR 6 L01R D01-24PG/V 3541032
VP-P2SRR 6 L04R D01-24PG/V 3541033
VP-P2SRR 6 L08R D01-24PG/V 3541034
VP-P2SRR 6 L16R D01-24PG/V 3541045
Other models on request
736
