4/3- Proportional solenoid valve,
direct acting, with position
transducer
subplate to ISO4401
P4WR 6
FEATURES
• High flow rate due to optimized casted housing
• Sm
all hysteresis by super finish of moving parts
• Long life cycle times by armature switching under oil
• Minimal wear by hardened and ground valve piston
• Simple exchangeability by international standardized hole pattern
to ISO 4401
SPECIFICATIONS
Operating pressure: ports P,A,B max. 350 bar
port T max. 210 bar
Nominal flow: max. 8 l/min 16 l/min 26 l/min
Hysteresis: (in % of Qmax): < 1,5 %
Repeat accuracy: (in % of Qmax) < +/- 1,0 %
Switch-on time: (0-100%) 30 ms
Switch-off time: (100-0%) 25 ms
Media operating temp.range: -20°C up to +80°C
Ambient temperature range: -20°C up to +50°C
Hydraulic fluid: Hydraulic fluid to DIN 51524 part 1/ 2
Viscosity range: 10 mm
2
/s up to 400mm
2
/s
Fil
tration: Class 18/16/13 up to 19/17/14
according to ISO4406
Supply voltage: DC voltage
Nominal current: 1,88 A at 12VDC
Resistance at 20°C: 3,66 Ohm at 12VDC
Coil duty rating: 100% continuous
Electromagnetic
compatibility: (EMC) Emissions to EN 50081-1
compatibility to EN 50082-2
to Norm 89/336 CEE
IP rating: IP65
Installation: no orientation restrictions
Hint: Vent system and valve before
setting in motion
Hole pattern: ISO4401-03-02-0-94
Weight: 2,3 kg
FUNCTION
The P4WR 6 is a direct acting
solenoid valve which combines the
directional control with the velocity
control of the consumer.
The controlled nominal flow is
proportional to the electrical input
signal at the coil.
Analogue to his size the coil creates
a force and moves the piston
against the spring. Herewith the
corresponding cross section
diameters are opened which
determines the flow rate in
dependence of the pressure
differential.
For the electrical control of the
valve there are electronic modules
available (see brochure 5.249.0
PEK-WAR).
SYMBOL
E
J
Up
to 40 l/min
Up to 350 bar
E 5.245.0 /08.10