FEATURES

• High flow rate due to optimized casted housing

• Small hysteresis by super finish of moving parts

• Long life cycle times by armature switching under oil

• Minimal wear by hardened and ground valve piston

• Simple exchangeability by international standardized hole pattern

to ISO 4401

• Integrated digital amplifier

SPECIFICATIONS

Operating pressure: ports P,A,B max. 320 bar

port T max. 140 bar

Nominal flow: max. 90 l/min (see performance chart)

Hysteresis: (in % of Qmax): < 3,0 %

Repeat accuracy: (in % of Qmax) < +/- 1,0 %

Switch-on time: (0-100%) 50 ms

Switch-off time: (100-0%) 60 ms

Media operating temp.range: -20°C up to +80°C

Ambient temperature range: -20°C up to +50°C

Hydraulic fluid: Hydraulic fluid to DIN 51524 part 1 / 2

Viscosity range: 10 mm

/s up to 400mm

Fil

tration: Class 18/16/13 up to 19/17/14 according

to ISO4406

Coil duty rating: 100% continuous

Electromagnetic

compatibility: (EMC) Emissions to EN 50081-1

compatibility to EN 50082-2

to Norm 89/336 CEE

IP rating: IP65

Installation: no orientation restrictions

Hint: Vent system and valve before

setting in motion

Hole pattern: ISO4401-05-04-0-94

Weight: 6,6 kg

4/3-Proportional solenoid

valve,

direct acting

with integrated Electronics

subplate to ISO4401

P4WEE 10

FUNCTION

The P4WEE10 is a direct acting

sol

enoid valve which combines the

directional control with the velocity

control of the consumer.

The controlled nominal flow is

proportional to the electrical input signal

at the coil.

Analogue to his size the coil creates a

force and moves the piston against the

spring. Herewith the corresponding

cross section diameters are opened

which determines the flow rate in

dependence of the pressure differential.

The integrated digital electronics permits

a better performance of the valve and

function by

- shortened response times

- reduced hysteresis

- better repeat accuracy

- integration CAN-Open as

an option

SYMBOL

to 90 l/min

up to 320 bar

E 5.231.0 /08.10

768

∆p P-T (bar)

PERFORMANCE

measured at T oil = 46°C and 33 mm²/s (The related ∆p is measured between lines P and T of the valve)

E30

E60

J30

J60

769

DIMENSIONS

Onboard Electronics

1) Valve with proportional coils

2) Electronic housing

3) Digital amplifier

4) Electronic connection

Parameter setting

onl

y with Can bus

option!

Power input: 70 W

Current draw: 2,6 A max.

Nominal voltage: 24 VDC (19-35VDC, ripple max.3Vpp)

Coil duty rating: 100% continuous

Input signal E0: voltage signal +/-10VDC (Impedance Ri >50 kOhm)

Input signal E1: current signal 4-20mA (Impedance Ri =500 Ohm)

Alert signals: Overload and overheating of Electronics

Communication: Field Bus Interface CAN-Bus ISO 11898

Electronics port: 7-pin MIL-C-5015-G (DIN43563)

CAN-Bus-port: M12-IEC 60947-5-2 (Option on request)

EMC EN50081-1: Corresponding 89/336 CEE Standard

EMC EN50082-2: Corresponding 89/336 CEE Standard

IP rating: IP65 (CEI EN 60529 Standard)

1) Mounting plate with O-rings 4x 12,42 x 1,78

Manual override

3) Free space for mounting the coil

4) Main plug

5) Plug 7 pin DIN 43563 – IP65 PG11 EX7/L/10

(included in delivery Mat. 6080324)

6) Plug for CAN bus (only for CAN bus)

7) Plug 5 Pin M12 - IP65 PG7 EC5S/M12L/10

(only for CAN bus)

Fastening screws: 4x M6 x 40 torque 8 Nm +0,5 Nm.

All dimensions in mm.

Fastening elements are not in the scope of delivery.

770

Input signal E0 voltage signal

Input signal E1 current signal

CAN-Bus Interface

771

Name

Proportional solenoid valve,

subplate with integr. Electronics

Nominal size

Symbol

E, J

Nominal flow

30 = 30 l/min

60 = 60 l/min (At ∆p=10 bar P-T)

Type

D01 = Standard type with manual override

Nominal voltage

12= 12 V DC

24= 24 V DC

Coil connector

PG= DIN plug to EN175301-803

Input signal

E0= +/-10 V

E1= 4-20 mA

Seal material

V= FPM (Standard)

N= NBR (optional)

MODEL CODE

P4WEE10 E 30 D01- 24PG E0 /V

Standard models Part No.

P4WEE 10 E30 D01-24PG E0/V 6078973

P4WEE 10 E60 D01-24PG E0/V 6078974

P4WEE 10 J30 D01-24PG E0/V 6078975

P4WEE 10 J60 D01-24PG E0/V 6078976

P4WEE 10 E30 D01-24PG E1/V 6078985

P4WEE 10 E60 D01-24PG E1/V 6078986

P4WEE 10 J30 D01-24PG E1/V 6078987

P4WEE 10 J60 D01-24PG E1/V 6078988

Other types on request

Hole pattern

HYDAC Fluidtechnik GmbH

Justus-von-Liebig-Str. 5

66280 Sulzbach / Saar

Tel.: 06897 / 509 -0

Fax: 06897 / 509 -598

Email: flutec@hydac.com

Annotation

The technical information in this

brochure are relating to the operating

conditions and applications.

At deviant applications and/or

operating conditions please contact

the technical dept.

Technical information are

subject to technical modifications.

772