MODEL CODE
4WH E 16 E S01 / V /U
Name
4/3-directional control valve
Pilot supply and drain
E = Control fluid inlet and outlet external
(Plug enclosed - not placed!)
Nominal size
16 = NW 16
Symbol for main stage
Available symbols: E, J, G, H
Type
S01 = Standard
Seals
V = Viton (Standard)
N = NBR
Option
U = with diversion plate PATB and Mounting screws
Omission = without diversion plate (Standard)
Standard models Part-no.
4WH E 16 E S01 /V 6079049
4WH E 16 H S01 /V nn
4WH E 16 J S01 /V 6079050
4WH E 16 G S01 /V nn
Other models on request
DIMENSIONS (with diversion plate)
HOLE PATTERN to ISO 4401-07
Width: 92 mm
Hole pattern
Mounting Screws: 4x M10 x 60 DIN 912-12.9
2x M6 x 50 DIN 912-12.9
Torque: M10 x 60: 67 + 3 Nm
M6 x 50: 14 + 2 Nm
Seals: 4x 22,22 x 2,62 – 90 Sh
2x 10,82 x 1,78 – 90 Sh
All dimensions in mm.
Fastening elements are not in the scope of supply.
Do not design port
L for standard
valves, no sealing
on valve side!
HYDAC Fluidtechnik GmbH
Just
us-von-Liebig-Str. 5
66280 Sulzbach / Saar
Tel.: 06897 / 509 -0
Fax: 06897 / 509 -598
Email: flutec@hydac.com
Annotation
The technical information in this
brochure are relating to the operating
conditions and applications.
At deviant applications and/or
operating conditions please contact
the technical dept.
Technical information are
subject to technical modifications.
Diversion plates PATB and PBTA
See
accessory equipment