4/3- Proportional solenoid valve,
direct acting
subplate to ISO4401
P4WE 6
FEATURES
• High flow rate due to optimized casted housing
• Sm
all hysteresis by super finish of moving parts
• Long life cycle times by armature switching under oil
• Minimal wear by hardened and ground valve piston
• Simple exchangeability by international standardized hole pattern
to ISO 4401
SPECIFICATIONS
Operating pressure: ports P,A,B max. 350 bar
port T max. 140 bar
Nominal flow: max. 40 l/min
Hysteresis: (in % of Qmax): < 6%
Repeat accuracy: (in % of Qmax) < +/- 1,5%
Switch-on time: (0-100%)50 ms
Switch-off time: (100-0%)40 ms
Media operating temp.range: -20°C up to +80°C
Ambient temperature range: -20°C up to +50°C
Hydraulic fluid: Hydraulic fluid to DIN 51524 part 1 a. 2
Viscosity range: 10 mm
2
/s up to 420mm
2
/s
Fil
tration: Class 18/16/13 up to 19/17/14
according to ISO4406
Supply voltage: DC voltage
Nominal current: 1,88 A at 12VDC
0,86 A at 24VDC
Resistance at 20°C: 3,66 Ohm at 12VDC
17,6 Ohm at 24VDC
Coil duty rating: 100% continuous
IP rating: IP65
Installation: no orientation restrictions
Hint: Vent system and valve before
setting in motion
Hole pattern: ISO4401-03-02-0-94
CETOP 4.2-4-03-350
Weight: 2 kg
FUNCTION
The P4WE 6 is a direct acting
solenoid valve which combines the
directional control with the velocity
control of the consumer.
The controlled nominal flow is
proportional to the electrical input
signal at the coil.
Analogue to his size the coil
creates a force and moves the
piston against the spring. Herewith
the corresponding cross section
diameters are opened which
determines the flow rate in
dependence of the pressure
differential.
For the electrical control of the
valve there are electronic modules
available (see brochure 5.249.2.0
PEM-XD).
SYMBOL
E
J
up to 40 l/min
up to 350 bar
E 5.228.0 /08.10