Control covers for 2-way cartridge valves
series H
LD-CCE
HYDAC control valves are used for
2-way cartridge valves of the
series H.
The optimised control cover design
enables operating pressures up to
420 bar and ensures reliable function
even in extreme conditions.
The control cover series includes a
large selection of different functions.
The integration of check and shuttle
valves as well as the intersection to
modular pilot control valves enables
the buildup of a compact system.
The various control covers are
available in sizes 16 to 63 and in
some cases up to size 80.
• Control cover in combination with a 2-way cartridge valve for directional,
pressure and check functions
• Designed for operating pressures up to 420 bar
• Large selection of functions for high flexibility in system design
• Interface according to ISO 7368:1989-08
EN 5.249.30. 4_05.22
1
CONTENT
Description 1
Features 1
Model code 2
Symbols 2
Technical Data 3
Range of orifice size 3
Installation options 4
General directional and pressure function 4
1D control cover 6
1H control cover 8
RM control cover 11
1W control cover 13
2W control cover 15
2WR control cover 17
4W control cover 19
1WDB control cover 22
DRE control cover 24
Accessories 26
Possible valve combinations 26
DESCRIPTION FEATURES
MODEL CODE
LD-CCE 16 H 6 1H 2 / N / X15
Type
Control cover for 2-way cartridge valves
Nominal size (NG)
16, 25, 32, 40, 50, 63, 80 (depending on function, see chart page 2)
Series
specified by manufacturer
Model
6 = mounting thread and control holes to ISO 7368
Symbols
1D, 1H, RM, 1W, 2W, 2WR, 4W, 1WDB, DRE (see chart page 2)
Adjustment (1H cover only)
2 = hexagonal with lock nut (standard)
9 = hexagonal with lock nut and protective cap, sealable
Sealing material ¹
N = NBR (standard)
V = FKM
Orifice configuration ¹
/YXX : Y = port P, A, B, T, X, Y, Z1, Z2, C
XX = orifice diameter (e.g. 15 = 1,5 mm)
¹ other types on request
EN 5.249.30. 4_05.22
2
SYMBOLS
Type Symbols Preferred function
Oper. pressure
[bar]
NG
1D
Control cover with remote control port for directional and check
function.
420 16 to 80
1H
Control cover with remote control connection and stroke
limitation for directional and check function as well as for manual
switch-off and manual throttle functions.
420 16 to 63
RM
Control cover with interface for a directional valve.
Can be used for directional functions.
420 16 to 80
1W
Control cover with interface for a directional valve.
Additional control port for a second cartridge valve.
Can be used for directional and pressure relief functions.
420 16 to 63
2W
Control cover with integrated shuttle valve for use as pilot-
operated check valve, with interface for a directional valve. 420 (NBR)
350 (FKM)
16 to 63
2WR
Control cover with integrated shuttle valve for use as pilot-
operated check valve, with interface for a directional valve. 420 (NBR)
350 (FKM)
16 to 63
4W
Control cover with interface for a directional valve.
Additional check valves are integrated to realise functions for
realisation of a maximum of two pilot control pressures.
420 (NBR)
350 (FKM)
16 to 80
1WDB
Control cover in combination with a 2-way cartridge valve, two
pressure relief valves in sandwich plate design and a directional
valve as pilot valve for a pilot-operated pressure relief function.
420 (NBR) 16 to 63
DRE
Control cover realizes a pressure relief function by combining a
2-way cartridge pressure valve, a pressure relief valve and a
directional valve.
420 (NBR) 16 to 63
TECHNICAL DATA
General specifications
MTTFd
150 - 1200 years, according to DIN EN ISO 13849-1:2016; Table C.1, confirmation of ISO
13849-2:2013; Tables C.1 and C.2
Ambient temperature range
[°C]
NBR: -30 to +80
FKM: -20 to +80
Installation position No orientation restrictions
Material Steel
Surface coating Burnished
Hydraulic specifications
Operating pressure [bar] max. 420
Operating fluid Hydraulic oil to DIN 51524 part 1, 2 and 3
NBR: HFB-/HFC- operating fluid
FKM: HFD- operating fluid
Temp. range of operating fluid
[°C]
NBR: -30 to +80
FKM: -20 to +80
Viscosity [mm²/s] 2,8 to 380
Permitted contamination level
of operating fluid
class 20/18/15 to ISO 4406
Sealing material NBR (standard), FKM
The size of the orifice influences the
cartridge valve’s opening and closing
behaviour. If necessary, please use
the following approximation for a
different orifice diameter
RANGE OF ORIFICE SIZE
The control covers LD-CCE of the H6 series are available with standard orifice. These types ensure the basic
functionality of the comination with cover and cartridge valve and should be used if the application is not known or
defined yet.
The final adjustment of the orifice diameter to optimise switching time and/or damping performance is the
responsibility of the user or is only possible during application.
Pilot flow rate (l/min)
Δp via orifice (bar)
Orifice diameter (mm)
t
open/close
[ms] = opening/closing time
V
Control
[cm³] = pilot volume oil of logic
valve
Q [l/min] = flow via orifice (diagramm)
t
open/close
=
V
Control
x 60
Q
EN 5.249.30. 4_05.22
3
Cover code
Orifice options
Orifices can be changed from the outside
P A B T X Y Z1 Z2 C
1D X All nominal sizes
1H X All nominal sizes
RM XXXX -
1W X X X X X X Z2 (for NG63 and NG80)
2W X X X X X X X Z1 und Z2 (for NG63 and NG80)
2WR XXXXX XX (forNG63 andNG80)
4W X X X X X X Z2 (for NG63 and NG80)
1WDB XXXXX XXAP (forall nominal sizes); X andZ2 (forNG63)
DRE XXXX XXZ2 (forNG63)
INSTALLATION OPTIONS OF THE ORIFICE IN THE CONTROL COVERS
Ports
Nominal sizes
16 25 32 40 50 63 80
P, A, B, T M6 M6 M6 M6 M6 M10 M10
X, C, Z1, Z2, Y M5 M6 M6 M8 M8 M10 M14
Orifice 0,8 * Part no. Orifice 1,5 * Part no.
Einbaudüse Steuerdeckel M5x0,8 6071916 Einbaudüse Steuerdeckel M5x1,5 6071920
Einbaudüse Steuerdeckel M6x0,8 6071917 Einbaudüse Steuerdeckel M6x1,5 6071921
Einbaudüse Steuerdeckel M8x0,8 6071918 Einbaudüse Steuerdeckel M6x1,5 6071922
Einbaudüse Steuerdeckel M10x0,8 6071919 Einbaudüse Steuerdeckel M10x1,5 6071923
*see brochure 5.249.19 ,,Accessories for Industrial Valves“ *see brochure 5.249.19 ,,Accessories for Industrial Valves“
General directional function
For a directional function, logic valves with poppet B, C, E or F are fundamentally suitable.
Furthermore, a cover is necessary to control the forces acting on the poppet.
The pressure acting on port A and B results to an opening force. The pressure in the spring chamber results to a
closing force. The valve is closed due to the sring force if there is only a small pressure or no pressure.
You can see the 1D cover in the example. The pressure acts on the poppet via the port X causing the closing gof the
valve. If X is connected to the tank, only the spring force remains to close the valve.
Cover
Port C
Spring
Sleeve
Port B
Valve poppet
Port A
Control manifold
General pressure function
Typical applications for a pressure relief function in cylinder and pumps.
For a pressure function, logic valves with poppet A and EX are fundamentally suitable. The special feature of these
types is a minimal area ratio or no area ratio between port A and B. This leaves only two control areas (A and C).
The limited pressure is on port A, but is also channelled to port C of the cover at the same time. If the pressure in port
A exceeds the value of the current pressure setting of pilot valve in port C, the valve opens.
EN 5.249.30. 4_05.22
4
Measure [mm]
Nominal size
16 25 32 40 50 63 80
b1 65 85 102 125 140 200
b
max
= 200
b2 65 85 102 125 140 180
d1
H7 ¹ 32 45 60 75 90 120 145
d2
H7 ¹ 25 34 45 55 68 90 110
d3 16 25 32 40 50 63 80
d4 16 25 32 40 50 63 80
d4max. ¹ 25 32 40 50 63 80 100
d5max. 4 6 8 10101216
d6 M8 M12 M16 M20 M20 M30 M24
d7 6,8 10,2 14 17,5 17,5 26,5 21
d8
H13 46668810
m1 46 58 70 85 100 125 -
m2 25 33 41 50 58 75 -
m3 23 29 35 42,5 50 62,5 -
m4 10,51617233038 -
m5 25 33 41 50 58 75 -
t1 43 58 70 87 100 130 175
t2 56 72 85 105 122 155 205
t3 11 12 13 15 17 20 25
t4 34 44 52 64 72 95 130
t4 an d4max. 29,5 40,5 48 59 65,5 86,5 120
t5 20 30 30 30 35 40 40
t6 14 20 26 33 33 50 39
t7 22,52,53445
t8 22,52,53345
t9 0,5 1 1,5 2,5 2,5 3 3
t10 17 24 31 38 38 56 45
U 0,03 0,03 0,03 0,05 0,05 0,05 0,05
W 0,05 0,05 0,1 0,1 0,1 0,2 0,2
DIMENSIONS NG 16 to 63
Cavity (directional and pressure function)
DIMENSIONS NG 80
Cavity (directional and pressure function)
¹ Recommendation deviated from the standard
EN 5.249.30. 4_05.22
5
Control cover function 1D
NG 16 to 80
Symbol
Directional function
Check function
FUNCTION
• Control cover in combination with a 2-way cartridge valve for directional and
check functions – depending on port X
• Control cover with remote control port to ISO 7368
• Orifice can be installed at port X
• The control cover 1D can be combined with 2-way cartridge valves with
poppet B, C, E and F.
DIRECTIONAL VALVE FUNCTION ¹
If a 1D cover is used in combination with a 2-way cartridge valve, the
pressure at cover port X relieves to the tank by realising a 2-way function –
flow direction from A B or B A.
The highest system pressure or the highest pressure from A or B on port X of
the cover results a blocking of the flow from A to B – and conversely.
CHECK FUNCTION ¹
If a 1D cover is used in combination with a 2-way cartridge valve, a check
function can be realised by connecting control port X to port B - flow direction
A B (B A blocked).
NG
Without orifice With standard orifice
Code Part no. Code Part no.
16 LD-CCE 16 H 6 1D/N 4085071 LD-CCE 16 H 6 1D/N/X15 4091191
25 LD-CCE 25 H 6 1D/N 4085105 LD-CCE 25 H 6 1D/N/X15 4091206
32 LD-CCE 32 H 6 1D/N 4085106 LD-CCE 32 H 6 1D/N/X25 4091208
40 LD-CCE 40 H 6 1D/N 4085107 LD-CCE 40 H 6 1D/N/X30 4091212
50 LD-CCE 50 H 6 1D/N 4085108 LD-CCE 50 H 6 1D/N/X35 4091225
63 LD-CCE 63 H 6 1D/N 4085109 LD-CCE 63 H 6 1D/N/X35 4091227
80 LD-CCE 80 H 6 1D/N 4085139 LD-CCE 80 H 6 1D/N/X40 4091229
Standard models
The 1D cover is equipped with a single orifice in X, which can be accessed from the outside. This orifice is used to limit
the flow from and to the C port of the cover and thus limit the opening and closing rate of the logic valve. For support
with orifice configuration, please contact HYDAC Fluidtechnik GmbH.
¹ see chart „Possible valve combinations“ on page 26
Hint: Spare parts seal kits see brochure 5.249.19 ,,Accessories for Industrial Valves“
EN 5.249.30. 4_05.22
6
DIMENSIONS
NG 16 to 63
NG 80
NG 16 25 32 40 50 63 80
B1 [mm (in)]
65
(2.56)
85
(3.35)
102
(4.02)
125
(4.92)
140
(5.51)
180
(7.09)
-
B2 [mm (in)]
65
(2.56)
85
(3.35)
102
(4.02)
125
(4.92)
140
(5.51)
180
(7.09)
-
D [mm (in)] ------
250
(9.84)
H [mm (in)]
35
(1.38)
35
(1.38)
45
(1.77)
60
(2.36)
60
(2.36)
80
(3.15)
80
(3.15)
L1 [mm (in)]
17
(0.67)
12
(0.47)
21
(0.83)
20
(0.79)
14
(0.55)
27
(1.06)
19
(0.75)
L2 [mm (in)]
3.5
(0.14)
3.5
(0.14)
4.5
(0.18)
4.5
(0.18)
4.5
(0.18)
4.5
(0.18)
4
(0.16)
L3 [mm (in)]
1.5
(0.06)
1.5
(0.06)
1.5
(0.06)
1.5
(0.06)
1.5
(0.06)
1.5
(0.06)
1.5
(0.06)
T (eye bolt thread) ------M10
Name plate position ACFCAAA
Plug DX G 1/8 " G 1/8" G 1/4" G 1/4" G 1/4" G 3/8" G 1/2"
Torque [Nm (ft-lbs)]
12
(9)
12
(9)
27
(20)
27
(20)
27
(20)
56
(41)
72
(53)
Hex. size[mm] 5 5666810
Interface ISO 7368
BA-06-2-A BB-08-2-A BC-09-2-A BD-10-2-A BE-11-2-A BF-12-2-A BG-13-2-A
Mounting srews S1 *
M8x35-10.9 M12x40-10.9 M16x50-10.9 M20x70-10.9 M20x70-10.9 M30x90-10.9 M24x90-12.9
Torque [Nm (ft-lbs)]
30
(22)
100
(74)
300
(221)
550
(406)
550
(406)
1,800
(1,328)
900
(664)
Weight [kg (lb)]
1.1
(2.43)
1.7
(3.75)
3.1
(6.84)
6.3
(13.89)
8.2
(18.08)
17.0
(37.49)
27.0
(59.54)
* Not included in delivery, see brochure 5.249.19 ,,Accessories for Industrial Valves“
EN 5.249.30. 4_05.22
7
Control cover function 1H
NG 16 to 80
Symbol
NG 18
NG 25 to 63
Directional and throttle function
Check function
FUNCTION
• Control cover in combination with a 2-way cartridge valve for directional and
check functions – depending on port X
• Control cover with remote control port to ISO 7368
• Orifice can be installed at port X
• Adjustable stroke limitation (throttle function)
• The control cover 1H can be combined with 2-way cartridge valves with
poppet B, C, E and F.
DIRECTIONAL VALVE FUNCTION ¹
If a 1H cover is used in combination with a 2-way cartridge valve, the
pressure at cover port X relieves to the tank by realising a 2-way function –
flow direction from A B or B A.
The highest system pressure or the highest pressure from A or B on port X of
the cover results a blocking of the flow in both directions.
THROTTLE FUNCTION ¹
The adjustable stroke limitation throttles the flow in both directions.
Adjustment of the stroke limitation is only partially possible under pressure.
The stroke limitation could also cause the 2-way cartridge valve to close – but
this is not the standard function.
CHECK FUNCTION ¹
If port X of the 1H cover is connected to port B of the logic, a check function
is realised. There is flow from A to B, but it is blocked in the opposite
direction.
Hint
The 1H cover is incompatible with the following 2-way cartridge valves and
must not be used with them: poppet A.
Other cartridge types, e.g. other cartridge series (D) or cartridge valves from
other suppliers are not compatible with the 1H cover.
¹ see chart „Possible valve combinations“ on page 26
Hint: Spare parts seal kits see brochure 5.249.19 ,,Accessories for Industrial Valves“
EN 5.249.30. 4_05.22
8
NG
Without orifice With standard orifice
Code Part no. Code Part no.
16
LD-CCE 16 H 6 1H 2/N 4085218 LD-CCE 16 H 6 1H 2/N/X15 4091194
LD-CCE 16 H 6 1H 9/N 4085219 LD-CCE 16 H 6 1H 9/N/X15 4091205
25
LD-CCE 25 H 6 1H 2/N 4085220 LD-CCE 25 H 6 1H 2/N/X15 4091207
LD-CCE 25 H 6 1H 9/N/X15 4093430
32
LD-CCE 32 H 6 1H 2/N 4085221 LD-CCE 32 H 6 1H 2/N/X25 4091209
LD-CCE 32 H 6 1H 9/N 4085223 LD-CCE 32 H 6 1H 9/N/X25 4091211
40 LD-CCE 40 H 6 1H 2/N 4085224 LD-CCE 40 H 6 1H 2/N/X30 4091214
50 LD-CCE 50 H 6 1H 2/N 4085265 LD-CCE 50 H 6 1H 2/N/X35 4091226
63 LD-CCE 63 H 6 1H 2/N 4085457 LD-CCE 63 H 6 1H 2/N/X35 4091228
Standard models
The 1D cover is equipped with a single orifice in X, which can be accessed from the outside. This orifice is used to limit
the flow from and to the C port of the cover and thus limit the opening and closing rate of the logic valve. For support
with orifice configuration, please contact HYDAC Fluidtechnik GmbH.
CONTROL COVER - DETAILS
NG 16 25 32 40 50 63
Plug MX, DX G 1/8 " G 1/8" G 1/4" G 1/4" G 1/4" G 3/8"
Hex. size [mm] 5 5 6 6 6 8
Torque [Nm (ft-lbs)]
12
(9)
12
(9)
27
(20)
27
(20)
27
(20)
56
(41)
Stroke limiter SW1
Schlüsselweite [mm] 8 8 8 13 13 17
Counter nut SW2
Wrench size [mm] 19 19 19 27 27 46
Torque [Nm (ft-lbs)]
65
(48)
65
(48)
65
(48)
85
(63)
85
(63)
150
(111)
Cover screw SW3
Wrench size [mm] 2,5 2,5 2,5 2,5 2,5 2,5
Torque [Nm (ft-lbs)]
5
(4)
5
(4)
5
(4)
5
(4)
5
(4)
5
(4)
Spindle guide SW4
Schlüsselweite [mm] 36 36 36 36 36 65
Torque [Nm (ft-lbs)]
110
(81)
110
(81)
110
(81)
150
(111)
150
(111)
350
(258)
Mounting screws S1 *
M8x35-10.9 M12x40-10.9 M16x50-10.9 M20x70-10.9 M20x70-10.9 M30x90-10.9
Torque [Nm (ft-lbs)]
30
(22)
100
(74)
300
(221)
550
(406)
550
(406)
1,800
(1,328)
Weight [kg (lb)]
1.7
(3.75)
2.4
(5.29)
3.6
(7.94)
7.3
(16.1)
9.13
(20.13)
19.3
(42.56)
* Not included in delivery, see brochure 5.249.19 ,,Accessories for Industrial Valves“
EN 5.249.30. 4_05.22
9
DIMENSIONS
NG 16 to 63
Locating pin
NG 16 25 32 40 50 63
B1 [mm (in)]
65
(2.56)
85
(3.35)
102
(4.02)
125
(4.92)
140
(5.51)
180
(7.09)
B2 [mm (in)]
65
(2.56)
85
(3.35)
102
(4.02)
125
(4.92)
140
(5.51)
180
(7.09)
H1 [mm (in)]
35
(1.38)
35
(1.38)
45
(1.77)
60
(2.36)
60
(2.36)
80
(3.15)
H2 [mm (in)]
86.5
(3.41)
86.5
(3.41)
86.5
(3.41)
83.5
(3.29)
74
(2.91)
120
(4.72)
H3 [mm (in)]
9
(0.35)
9
(0.35)
21
(0.83)
20
(0.79)
14
(0.55)
27
(1.06)
H4 max [mm (in)]
56.5
(2.22)
56.5
(2.22)
62
(2.44)
71
(2.8)
64
(2.52)
90
(3.54)
L1 [mm (in)]
9.5
(0.37)
13.5
(0.53)
16
(0.63)
20
(0.79)
20
(0.79)
27.5
(1.08)
L2 [mm (in)]
9.5
(0.37)
13.5
(0.53)
16
(0.63)
20
(0.79)
20
(0.79)
27.5
(1.08)
L3 [mm (in)]
3.5
(0.14)
3.5
(0.14)
4.5
(0.18)
4.5
(0.18)
4.5
(0.18)
4.5
(0.18)
Name plate position CCFCA A
Interface ISO 7368 BA-06-2-A BB-08-2-A BC-09-2-A BD-10-2-A BE-11-2-A BF-12-2-A
Hint for adjustment
1H covers ordered with adjustment 9 are supplied with a cover set for tamper protection. This set is delivered in a disassembled
state with the cover and must be attached by the user.
The set consists of a protective cap, 1 pcs. mounting srew, 1 pcs. wire und 1 pcs. seal.
Covers ordered in standard adjustment 2 are delivered without protective cap.
EN 5.249.30. 4_05.22
10
Control cover function RM
NG 16 to 80
Symbol
NG 16 to 25
NG 32 to 50
NG 63 to 80
Directional function
Pressure relief function
FUNCTION
• Control cover with remote control port to ISO 7368
• Orifice can be installed at port P, A, B, T
• Pilot port interface size 6 and 10 (size 6 pilot valves can be used up to
control cover size 50, and size 10 pilot valves for control covers size 63 and
above)
• Depending on the function, control cover RM can be combined with the
following 2-way cartridge valves:
- Pilot-operated directional function:
2-way cartridge valves with poppet B, C, E and F.
- Pilot-operated pressure relief function:
2-way cartridge valve with valve poppet A or E.
DIRECTIONAL VALVE FUNCTION ¹
If an RM cover is used in combination with a 2-way cartridge valve and a 4/2-
way pilot valve, a 2-way function is realised ich the solenoid is energized and
a plug is in port B of the cover - with flow direction A B or B A. This is
achieved by pressure release of the spring chamber of 2-way cartridge valve.
If the solenoid is not energized and a plug is in port B of the cover, the
pilot pressure is applied to the spring chamber at port X. Depending on the
pilot pressure, the corresponding flows are blocked. If the plug is installed in
port A of the cover, the function for energized and de-energized solenoids is
precisely the opposite.
PRESSURE RELIEF FUNCTION ¹
If an RM cover is used with a 2-way cartridge valve and a pilot pressure relief
valve, a pressure relief function can be realised.
¹ see chart „Possible valve combinations“ on page 26
Hint: Spare parts seal kits see brochure 5.249.19 ,,Accessories for Industrial Valves“
EN 5.249.30. 4_05.22
11
DIMENSIONS
NG 16 to 63
NG 80
NG 16 25 32 40 50 63 80
B1 [mm (in)] 80 (3.15) 85 (3.35) 102 (4.02) 125 (4.92) 140 (5.51) 180 (7.09) -
B2 [mm (in)] 65 (2.56) 85 (3.35) 102 (4.02) 125 (4.92) 140 (5.51) 180 (7.09) -
D [mm (in)] - - - - - - 250 (9.84)
H [mm (in)] 35 (1.38) 40 (1.57) 45 (1.77) 60 (2.36) 60 (2.36) 80 (3.15) 80 (3.15)
L1 [mm (in)] - - 61.3 (2.41) 73 (2.87) 80.4 (3.17) 74.9 (2.95) -
L2 [mm (in)] - - 3.5 (0.14) 4.5 (0.18) 4.5 (0.18) 4.5 (0.18) 2.5 (0.1)
L3 [mm (in)] 1.5 (0.06) 1.5 (0.06) 1.5 (0.06) 1.5 (0.06) 1.5 (0.06) 1.5´ (0.06) 1.5 (0.06)
L4 [mm (in)] - - 27.0 (1.06) 30.0 (1.18) 30.0 (1.18) 57.0 (2.24) 40.0 (1.57)
L5 [mm (in)] 7.0 (0.28) 23.5 (0.93) 32.0 (1.26) 43.5 (1.71) 51.0 (2.01) 63.0 (2.48) 27.0(1.06)
L6 [mm (in)]
16.25
(0.64)
26.25
(1.03)
34.65
(1.36)
46.25
(1.82)
53.75
(2.12)
68.6
(2.7)
21.4
(0.84)
T (eye bolt thread) ------M10
Name plate position CCFCAAA
Interface ISO 7368 BA-06-2-A BB-08-2-A BC-09-2-A BD-10-2-A BE-11-2-A BF-12-2-A BG-13-2-A
CONTROL COVER - DETAILS
NG 16 25 32 40 50 63 80
Pilot port
Interface ISO 4401
03-02-0-05 03-02-0-05 03-02-0-05 03-02-0-05 03-02-0-05 05-04-0-05 05-04-0-05
Plug MX - - G 1/8" G 1/4" G 1/4" G 1/4" G 3/8"
Hex. size [mm] - - 12 (9) 27 (20) 27 (20) 27 (20) 56 (41)
Torque [Nm (ft-lbs)] - - 5 6 6 6 8
Mounting screws S1 *
M8x35-10.9 M12x40-10.9 M16x50-10.9 M20x70-10.9 M20x70-10.9 M30x90-10.9 M24x90-12.9
Torque [Nm (ft-lbs)] 30 (22) 100 (74) 300 (221) 550 (406) 550 (406) 1,800 (1,328) 900 (664)
Wight [kg (lb)] 1.3 (2.87) 2.0 (4.41) 3.0 (6.62) 6.2 (13.67) 8.0 (17.64) 17.0 (37.49) 26.0 (57.33)
* Not included in delivery, see brochure 5.249.19 ,,Accessories for Industrial Valves“
NG Code Part no.
16 LD-CCE 16 H 6 RM/N 4085380
25 LD-CCE 25 H 6 RM/N 4085388
32 LD-CCE 32 H 6 RM/N 4085398
40 LD-CCE 40 H 6 RM/N 4085438
50 LD-CCE 50 H 6 RM/N 4085444
63 LD-CCE 63 H 6 RM/N 4085464
80 LD-CCE 80 H 6 RM/N 4085476
Standard models
The orifice configurations possible with this cover are numerous
and dependent on the pilot valve and the desired function.
For further support with orifice configuration, please contact HYDAC
Fluidtechnik GmbH.
EN 5.249.30. 4_05.22
12
Control cover function 1W
NG 16 to 63
Symbol
NG 16 to 25
NG 32 to 50
NG 63
Directional function
FUNCTION
• Control cover with remote control port to ISO 7368
• Orifice can be installed at port P, A, B, T
• Pilot port interface size 6 and 10 (size 6 4/2-way pilot valves can be used
up to control cover size 50, and size 10 4/2-way pilot valves for control
covers size 63 and above)
• The control cover 1W can be combined with 2-way cartridge valves with
poppet B, C, E and F.
DIRECTIONAL VALVE FUNCTION ¹
If a 1W cover is used in combination with a 2-way cartridge valve and a pilot
valve, the same function is realised as RM cover.
If the solenoid of the directional valve is energized, the spring chamber of the
cartridge valve is connected to the tank. This enables flow from port A to B,
and conversely.
If the solenoid is de-energized, the spring chmaber is supplied with pilot
pressure from port X.
If this pilot pressure comes from port A of the cartridge valve, flow from A
B is blocked; if it comes from port B, it is blocked in the opposite direction.
Furthermore, port Z1 and Z2 can be used to actuate another 2-way cartridge
valve.
Standard models
The orifice configurations possible with this cover are numerous and
dependent on the pilot valve used and the desired function.
For further support with orifice configuration, please contact HYDAC
Fluidtechnik GmbH.
NG Code Part no.
16 LD-CCE 16 H 6 1W/N 4085375
25 LD-CCE 25 H 6 1W/N 4085381
32 LD-CCE 32 H 6 1W/N 4085391
40 LD-CCE 40 H 6 1W/N 4085399
50 LD-CCE 50 H 6 1W/N 4085440
63 LD-CCE 63 H 6 1W/N 4085458
¹ see chart „Possible valve combinations“ on page 26
Hint: Spare parts seal kits see brochure 5.249.19 ,,Accessories for Industrial Valves“
EN 5.249.30. 4_05.22
13
DIMENSIONS
NG 16 to 50
NG 63
NG 16 25 32 40 50 63
B1 [mm (in)] 80 (3.15) 85 (3.35) 102 (4.02) 125 (4.92) 140 (5.51) 180 (7.09)
B2 [mm (in)] 65 (2.56) 85 (3.35) 102 (4.02) 125 (4.92) 140 (5.51) 180 (7.09)
H [mm (in)] 35 (1.38) 35 (1.38) 45 (1.77) 60 (2.36) 60 (2.36) 80 (3.15)
L1 [mm (in)] - - 61.3 (2.41) 80 (3.15) 80.4 (3.17) 74.9 (2.95)
L2 [mm (in)] - - 3.5 (0.14) 4.5 (0.18) 4.5 (0.18) 4.5 (0.18)
L3 [mm (in)] 1.5 (0.06) 1.5 (0.06) 1.5 (0.06) 1.5 (0.06) 1.5 (0.06) 1.5 (0.06)
L4 [mm (in)] - - 26 (1.02) 33.9 (1.33) 37.5 (1.48) 57 (2.24)
L5 [mm (in)] - - 15 (0.59) 20 (0.79) 21 (0.83) 26.25 (1.03)
L6 [mm (in)] - - 3.5 (0.14) 4.5 (0.18) 4.5 (0.18) 4.5 (0.18)
L7 [mm (in)] 7 (0.28) 23.5 (0.93) 32 (1.26) 43.5 (1.71) 51 (2.01) 63 (2.48)
L8 [mm (in)] 16.25 (0.64) 26.25 (1.03) 34.75 (1.37) 46.25 (1.82) 53.75 (2.12) 68.6 (2.7)
Name plate position CCFCA A
Interface ISO 7368 BA-06-2-A BB-08-2-A BC-09-2-A BD-10-2-A BE-11-2-A BF-12-2-A
CONTROL COVER – DETAILS
NG 16 25 32 40 50 63
Pilot port
Interface ISO 4401
03-02-0-05 03-02-0-05 03-02-0-05 03-02-0-05 03-02-0-05 05-04-0-05
Plug MP, MZ2 + DZ2 - - G 1/8" G 1/4" G 1/4" G 1/4"
hex. size [mm] - - 5 6 6 6
Torque [Nm (ft-lbs)] - - 12 (9) 27 (20) 27 (20) 27 (20)
Mounting screws S1 *
M8x35-10.9 M12x40-10.9 M16x50-10.9 M20x70-10.9 M20x70-10.9 M30x90-10.9
Torque [Nm (ft-lbs)] 30 (22) 100 (74) 300 (221) 550 (406) 550 (406) 1,800 (1,328)
Weight [kg (lb)] 1.3 (2.87) 1.7 (3.75) 3.0 (6.62) 6.2 (13.67) 8.0 (17.64) 17.0 (37.49)
* Not included in delivery, see brochure 5.249.19 ,,Accessories for Industrial Valves“
EN 5.249.30. 4_05.22
14
Control cover function 2W
NG 16 to 63
Symbol
NG 16 to 25
NG 32 to 50
NG 63
Pilot operated check function
FUNCTION
• Control cover with integrated dhuttle valve
• Control cover with remote control port to ISO 7368
• Orifice can be installed at port P, A, B, T, C, Z2
• Pilot port interface size 6 and 10 (size 6 4/2-way pilot valves can be used
up to control cover size 50, and size 10 4/2-way pilot valves for control
covers size 63 and above)
• The control cover 2W can be combined with 2-way cartridge valves with
poppet B, C, E and F.
CHECK FUNCTION ¹
2W cover with a 4/2-way pilot valve results in a pilot operated check function.
As long as no port Z2 is not relieved - flow from port B A is constantly
blocked.
The flow direction A – B can be influenced by the switching position of the
pilot directional valve. If there is a plug in B, flow A to B is open if the solenoid
is energized; if the solenoid is de-energized, A to B is blocked.
If there is a plug in port A, the pilot function is conversely.
Depressurising Z2 opens flow from A to B on both sides.
Additionally, Z2 can be used to actuate other valves.
Standard models
The orifice configurations possible with this cover are numerous and
dependent on the pilot valve used and the desired function.
For further support with orifice configuration, please contact HYDAC
Fluidtechnik GmbH.
NG Code Part no.
16 LD-CCE 16 H 6 2W/N 4085377
25 LD-CCE 25 H 6 2W/N 4085384
32 LD-CCE 32 H 6 2W/N 4085394
40 LD-CCE 40 H 6 2W/N 4085403
50 LD-CCE 50 H 6 2W/N 4085441
63 LD-CCE 63 H 6 2W/N 4085460
¹ see chart „Possible valve combinations“ on page 26
Hint: Spare parts seal kits see brochure 5.249.19 ,,Accessories for Industrial Valves“
EN 5.249.30. 4_05.22
15
DIMENSIONS
NG 16 to 50
NG 63
Mx (32‐50)
W(16)
NG 16 25 32 40 50 63
B1 [mm (in)] 80 (3.15) 85 (3.35) 102 (4.02) 125 (4.92) 140 (5.51) 180 (7.09)
B2 [mm (in)] 65 (2.56) 85 (3.35) 102 (4.02) 125 (4.92) 140 (5.51) 180 (7.09)
H [mm (in)] 40 (1.57) 40 (1.57) 45 (1.77) 60 (2.36) 60 (2.36) 80 (3.15)
L1 [mm (in)] 35 (1.38) - 58.9 (2.32) 73 (2.87) 80.4 (3.17) 74.5 (2.93)
L2 [mm (in)] - - 3.5 (0.14) 4.5 (0.18) 4.5 (0.18) 4.5 (0.18)
L3 [mm (in)] 1.5 (0.06) 1.5 (0.06) 1.5 (0.06) 1.5 (0.06) 1.5 (0.06) 1.5 (0.06)
L4 [mm (in)] 21 (0.83) - 34 (1.34) 40.5 (1.59) 41 (1.61) 56 (2.2)
L5 [mm (in)] - - 21 (0.83) 17 (0.67) 18.5 (0.73) 26.25 (1.03)
L6 [mm (in)] - 1.0 (0.04) 3.5 (0.14) 4.5 (0.18) 4.5 (0.18) 4.5 (0.18)
L7 [mm (in)] 7 (0.28) 23.5 (0.93) 32 (1.26) 43.5 (1.71) 51 (2.01) 63 (2.48)
L8 [mm (in)] 16.25 (0.64) 26.25 (1.03) 34.65 (1.36) 46.25 (1.82) 53.75 (2.12) 68.6 (2.7)
L9 [mm (in)] 1.6 (0.06) 2.5 (0.1) - - - -
L10 [mm (in)] 18 (0.71) 23 (0.91) 21 (0.83) 31 (1.22) 32 (1.26) 40 (1.57)
L11 [mm (in)] 46.2 (1.82) 45 (1.77) 51 (2.01) 62.5 (2.46) 70 (2.76) 79.7 (3.14)
Name plate position CCBCAA
Interface ISO 7368 BA-06-2-A BB-08-2-A BC-09-2-A BD-10-2-A BE-11-2-A BF-12-2-A
CONTROL COVER - DETAILS
NG 16 25 32 40 50 63
Pilot port
Interface ISO 4401
03-02-0-05 03-02-0-05 03-02-0-05 03-02-0-05 03-02-0-05 05-04-0-05
Plug Mx,MZ2,DZ1 + DZ2 - - G 1/8" G 1/4" G 1/4" G 1/4"
Hex. size [mm] - - 5 6 6 6
Torque [Nm (ft-lbs)] - - 12 (9) 27 (20) 27 (20) 27 (20)
Plug W G 3/8" G 3/8" G 3/8" G 3/8" G 3/8" G 1/2"
Hex. size [mm] 8 8 8 8 8 10
Drehmoment [Nm (ft-lbs)] 56 (41) 56 (41) 56 (41) 56 (41) 56 (41) 72 (53)
Mounting screws S1 *
M8x35-10.9 M12x40-10.9 M16x50-10.9 M20x70-10.9 M20x70-10.9 M30x90-10.9
Torque [Nm (ft-lbs)] 30 (22) 100 (74) 300 (221) 550 (406) 550 (406) 1,800 (1,328)
Weight [kg (lb)] 1.5 (3.31) 2.0 (4.41) 3.0 (6.62) 6.2 (13.67) 8.0 (17.46) 16.5 (36.38)
* Not included in delivery, see brochure 5.249.19 ,,Accessories for Industrial Valves“
EN 5.249.30. 4_05.22
16
Control cover function 2WR
NG 16 to 63
Symbol
NG 16 to 25
NG 32 to 50
NG 63
Pilot operated check function
FUNCTION
• Control cover with integrated shuttle valve
maximum available pilot pressure is applied in the spring chamber
(port C)
• Control cover with remote control port to ISO 7368
• Orifice can be installed at port P, A, B, T, X, C
• Pilot port interface size 6 and 10 (size 6 4/2-way pilot valves can be used
up to control cover size 50, and size 10 4/2-way pilot valves for control
covers size 63 and above)
• The control cover 2WR can be combined with 2-way cartridge valves with
poppet B, C, E and F.
CHECK FUNCTION ¹
If a 2WR cover is used in combination with a 2-way cartridge valve and a 4/2-
way pilot valve, this results free flow from port A to B if the solenoid is
energized.
If the pressure in port B exceeds the pressure in port A, the 2-way cartridge
valve is closed and flow in direction B to A is blocked.
If the solenoid is de-energized, flow in both directions (A B and
B A) is blocked.
Furthermore, port Z2 can be used to actuate other 2-way cartridge valves.
Standard models
The orifice configurations possible with this cover are numerous and
dependent on the pilot valve used and the desired function.
For further support with orifice configuration, please contact HYDAC
Fluidtechnik GmbH.
NG Code Part no.
16 LD-CCE 16 H 6 2WR/N 4085378
25 LD-CCE 25 H 6 2WR/N 4085385
32 LD-CCE 32 H 6 2WR/N 4085395
40 LD-CCE 40 H 6 2WR/N 4085435
50 LD-CCE 50 H 6 2WR/N 4087273
63 LD-CCE 63 H 6 2WR/N 4085461
¹ see chart „Possible valve combinations“ on page 26
Hint: Spare parts seal kits see brochure 5.249.19 ,,Accessories for Industrial Valves“
EN 5.249.30. 4_05.22
17
DIMENISONS
NG 16 to 50
NG 63
W(32,50)
W(16,25,40)
NG 16 25 32 40 50 63
B1 [mm (in)] 80 (3.15) 85 (3.35) 102 (4.02) 125 (4.92) 140 (5.51) 180 (7.09)
B2 [mm (in)] 65 (2.56) 85 (3.35) 102 (4.02) 125 (4.92) 140 (5.51) 180 (7.09)
H [mm (in)] 40 (1.57) 40 (1.57) 45 (1.77) 60 (2.36) 60 (2.36) 80 (3.15)
L1 [mm (in)] - - 51 (2.01) 62.5 (2.46) 70 (2.76) 90 (3.54)
L2 [mm (in)] - - 3.5 (0.14) 4.5 (0.18) 4.5 (0.18) 4.5 (0.18)
L3 [mm (in)] 1.5 (0.06) 1.5 (0.06) 1.5 (0.06) 1.5 (0.06) 1.5 (0.06) 1.5 (0.06)
L4 [mm (in)] - - 17.5 (0.69) - 31 (1.22) 44 (1.73)
L5 [mm (in)] 16.25 (0.64) 26.25 (1.03) 34.65 (1.36) 46.25 (1.82) 73 (2.87) 68.6 (2.7)
L6 [mm (in)] 7 (0.28) 23.5 (0.93) 32 (1.26) 43.5 (1.71) 53.75 (2.12) 63 (2.48)
L7 [mm (in)] - - 63 (2.48) - 51 (2.01) 70 (2.76)
L8 [mm (in)] 16.5 (0.65) 21 (0.83) - 34.5 (1.36) - 44 (1.73)
L9 [mm (in)] 31.5 (1.24) 43.5 (1.71) - 64 (2.52) - 70 (2.76)
L10 [mm (in)] -----4.5 (0.18)
Name plate position CCBCAA
Interface ISO 7368 BA-06-2-A BB-08-2-A BC-09-2-A BD-10-2-A BE-11-2-A BF-12-2-A
CONTROL COVER - DETAILS
NG 16 25 32 40 50 63
Pilotport
Interface ISO 4401
03-02-0-05 03-02-0-05 03-02-0-05 03-02-0-05 03-02-0-05 05-04-0-05
Plug DX + MZ1 - - G 1/8" G 1/4" G 1/4" G 1/4"
Hex. size [mm] - - 12 (9) 27 (20) 27 (20) 27 (20)
Torque [Nm (ft-lbs)] - - 5 6 6 6
Plug W G 3/8" G 3/8" G 3/8" G 3/8" G 3/8" G 3/4"
Hex. size[mm] 8888812
Torque [Nm (ft-lbs)] 56 (41) 56 (41) 56 (41) 56 (41) 56 (41) 120 (89)
Mounting screws S1 *
M8x35-10.9 M12x40-10.9 M16x50-10.9 M20x70-10.9 M20x70-10.9 M30x90-10.9
Torque [Nm (ft-lbs)] 30 (22) 100 (74) 300 (221) 550 (406) 550 (406) 1,800 (1,328)
Weight [kg (lb)] 1.5 (3.31) 2.0 (4.41) 3.0 (6.62) 6.2 (13.67) 9.0 (19.85) 23.6 (52.04)
* Not included in delivery, see brochure 5.249.19 ,,Accessories for Industrial Valves“
EN 5.249.30. 4_05.22
18
Control cover function 4W
NG 16 to 80
Symbol
NG 16 to 25
NG 32 to 50
NG 63 to 80
Directional function
FUNCTION
• Control cover with parallel check valves at port X and Z1
The higher pressure of both is at port P
This feature is useful in applications where the risk of the 2-way
cartridge valve briefly opening during the pilot pressure change needs
to be fully eliminated.
• Control cover with remote control port to ISO 7368
• Orifice can be installed at port P, A, B, T, C, Z2
• Pilot port interface size 6 and 10 (size 6 4/2-way pilot valves can be used
up to control cover size 50, and size 10 4/2-way pilot valves for control
covers size 63 and above)
• The control cover 4W can be combined with 2-way cartridge valves with
poppet B, C, E and F.
DIRECTIONAL VALVE FUNCTION ¹
If a 4W cover is used in combination with a 2-way cartridge valve and a pilot
valve, a bidirectional directional function or a check function can be realised.
If the solenoid is energized and a plug is installed in port B of the cover, the
spring chamber of the cartridge valve is connected to the tank. This enables
flow via 2-way cartridge valve in both directions.
If the solenoid is de-energized, the higher of the two pilot pressures is at port
X and Z1 in the spring chamber. This enables a check function - depending
on location decrease of pilot pressure at port A or B in the corresponding
direction:
• If the pilot pressure of port A is reduced, flow from A to B is blocked.
• If the pilot pressure of port B is reduced, flow from B to A is blocked.
Precisely the opposite functions are achieved in terms of a switching valve,
which is on and off if a plug is installed in port A instead of port B.
Furthermore, port Z2 can be used to actuate a second 2-way cartridge valve.
¹ see chart „Possible valve combinations“ on page 26
Hint: Spare parts seal kits see brochure 5.249.19 ,,Accessories for Industrial Valves“
EN 5.249.30. 4_05.22
19
DIMENSIONS
NG 16 to 50
NG 63
NG 16 25 32 40 50 63
B1 [mm (in)] 80 (3.15) 85 (3.35) 102 (4.02) 125 (4.92) 140 (5.51) 180 (7.09)
B2 [mm (in)] 65 (2.56) 85 (3.35) 102 (4.02) 125 (4.92) 140 (5.51) 180 (7.09)
H [mm (in)] 40 (1.57) 40 (1.57) 45 (1.77) 60 (2.36) 60 (2.36) 80 (3.15)
L1 [mm (in)] 43 (1.69) 53 (2.09) 59.5 (2.34) 73 (2.87) 82 (3.23) 74.5 (2.93)
L2 [mm (in)] - - 3.5 (0.14) 4.5 (0.18) 4.5 (0.18) 4.5 (0.18)
L3 [mm (in)] 1.5 (0.06) 1.5 (0.06) 1.5 (0.06) 1.5 (0.06) 1.5 (0.06) 1.5 (0.06)
L4 [mm (in)] - - 1 (0.04) - - -
L5 [mm (in)] 17 (0.67) 20 (0.79) 24 (0.94) 38.5 (1.52) 39 (1.54) 45 (1.77)
L6 [mm (in)] 11.5 (0.45) - 15 (0.94) 19 (0.75) 19 (0.75) 26.25 (1.03)
L7 [mm (in)] 1.4 (0.06) - 3.5 (0.14) 4.5 (0.18) 4.5 (0.18) 4.5 (0.18)
L8 [mm (in)] 7 (0.28) 23.5 (0.93) 32 (1.26) 43.5 (1.71) 51 (2.01) 63 (2.48)
L9 [mm (in)] 16.25 (0.64) 26.25 (1.03) 34.65 (1.36) 46.25 (1.82) 53.75 (2.12) 68.6 (2.7)
Name plate position CCFCAA
Interface ISO 7368 BA-06-2-A BB-08-2-A BC-09-2-A BD-10-2-A BE-11-2-A BF-12-2-A
EN 5.249.30. 4_05.22
20
DIMENSIONS
NG 80
NG 80
D [mm (in)] 250 (9.84)
H [mm (in)] 80 (3.15)
L1 [mm (in)] 41.5 (1.63)
L2 [mm (in)] 2.5 (0.1)
L3 [mm (in)] 1.5 (0.06)
L4 [mm (in)] 18 (0.71)
L5 [mm (in)] 4 (0.16)
L6 [mm (in)] 27 (1.06)
L7 [mm (in)] 21.4 (1.06)
T (eye bolt thread) M10
Interface ISO 7368 BG-13-2-A
CONTROL COVER - DETAILS
NG 16 25 32 40 50 63 80
Pilot port
Interface ISO 4401
03-02-0-05 03-02-0-05 03-02-0-05 03-02-0-05 03-02-0-05 05-04-0-05 05-04-0-05
Plug MP, MZ2, DZ2 - - G 1/8" G 1/4" G 1/4" G 1/4" G 3/8 "
Hex. size [mm] - - 12 (9) 27 (20) 27 (20) 27 (20) 56 (41)
Torque [Nm (ft-lbs)] - - 5 6 6 6 8
Plug R1 + R2 G 1/8" G 1/8" G 1/4" G 3/8" G 3/8" G 1/2" G 1"
Hex. size [mm] 12 (9) 12 (9) 27 (20) 56 (41) 56 (41) 80 (59) 170 (125)
Torque [Nm (ft-lbs)] 5 5 6 8 8 10 17
Mounting screws S1 *
M8x35-10.9 M12x40-10.9 M16x50-10.9 M20x70-10.9 M20x70-10.9 M30x90-10.9 M24x90-12.9
Torque [Nm (ft-lbs)] 30 (22) 100 (74) 300 (221) 550 (406) 550 (406)
1,800
(1,328)
900 (664)
Weight [kg (lb)]
1.5
(3.31)
2
(4.41)
3.0
(6.62)
6.2
(13.67)
9.0
(19.85)
16.5
(36.38)
26
(57.33)
Standard models
The orifice configurations possible with this cover are numerous and dependent on the pilot valve used and the desired
function.
For further support with orifice configuration, please contact HYDAC Fluidtechnik GmbH.
NG Code Part no.
16 LD-CCE 16 H 6 4W/N 4085379
25 LD-CCE 25 H 6 4W/N 4085387
32 LD-CCE 32 H 6 4W/N 4085397
40 LD-CCE 40 H 6 4W/N 4085436
50 LD-CCE 50 H 6 4W/N 4085443
63 LD-CCE 63 H 6 4W/N 4085463
80 LD-CCE 80 H 6 4W/N 4085475
EN 5.249.30.
4_05.22
21
* Not included in delivery, see brochure 5.249.19 ,,Accessories for Industrial Valves“
Control cover function 1WDB
NG 16 to 63
Symbol
NG 16 to 25
NG 32 to 50
NG 63
Pilot operated pressure relief function
FUNCTION
• Control cover especially for complex pressure control functions with multiple
pilot valves
• Orifice installation option at port P, A, B, T, X, Z2, C
• Pilot port interface NG6 and NG10 (up to control cover NG50 it can be used
4/2-way pilot valves NG6 or up to control cover NG63 it can be used 4/2-
way pilot valves NG10)
• The control cover 1WDB can be combined with 2-way cartridge valves with
poppet A and EX.
PILOT OPERATED PRESSURE RELIEF FUNCTION ¹
When using a 1WDB cover in combination with a 2-way cartridge valve, two
pressure relief valves in sandwich plate design and a directional control valve
as pilot valve, a pilot operated pressure relief function can be realized.
Due to a two-stage pressure relief function, it is possible to work with two
preset pressures.
When the directional valve is energized, port P is connected to port A. The
pressure in port X is passed to the pilot valve (2) via port A on the directional
control valve, acting on both pilot valves. The lower pressure setting opens
the pilot valve (2). After overcoming the spring force, the cartridge valve
opens from port A to port B. If the directional valve is not energized, the pilot
valve (2) is switched to the low-pressure side. This limits the pressure at the
pilot valve (1) and the cartridge valve opens.
Standard models
The orifice configurations possible with this cover are numerous and
dependent on the pilot valve used and the desired function.
For further support with orifice configuration, please contact HYDAC
Fluidtechnik GmbH.
NG Code Part no.
16 LD-CCE 16 H 6 1WDB/N 4481042
25 LD-CCE 25 H 6 1WDB/N 4481043
32 LD-CCE 32 H 6 1WDB/N 4481044
40 LD-CCE 40 H 6 1WDB/N 4481075
50 LD-CCE 50 H 6 1WDB/N 4481076
63 LD-CCE 63 H 6 1WDB/N 4481077
(1)
(2)
)(
¹ see chart „Possible valve combinations“ on page 26
Hint: Spare parts seal kits see brochure 5.249.19 ,,Accessories for Industrial Valves“
EN 5.249.30. 4_05.22
22
DIMENSIONS
NG 16 to 50
NG 63
NG 16 25 32 40 50 63
B1 [mm (in)] 80 (3.15) 85 (3.35) 102 (4.02) 125 (4.92) 140 (5.51) 180 (7.09)
B2 [mm (in)] 65 (2.56) 85 (3.35) 102 (4.02) 125 (4.92) 140 (5.51) 180 (7.09)
H [mm (in)] 35 (1.38) 40 (1.57) 45 (1.77) 60 (2.36) 60 (2.36) 80 (3.15)
L1 [mm (in)] - - 61.3 (2.41) 80 (2.87) 80.4 (3.17) 74.9 (2.95)
L2 [mm (in)] - - 3.5 (0.14) 4.5 (0.18) 4.5 (0.18) 4.5 (0.18)
L3 [mm (in)] 1.5 (0.06) 1.5 (0.06) 1.5 (0.06) 1.5 (0.06) 1.5 (0.06) 1.5 (0.06)
L4 [mm (in)] - - 26 (1.02) 33.9 (1.33) 37.5 (1.48) 57 (2.24)
L5 [mm (in)] - - 15 (0.59) 20 (0.79) 21 (0.83) 26.25 (1.03)
L6 [mm (in)] - - 3.5 (0.14) 4.5 (0.18) 4.5 (0.18) 4.5 (0.18)
L7 [mm (in)] 7 (0.28) 23.5 (0.93) 32 (1.26) 43.5 (1.71) 51 (2.01) 63 (2.48)
L8 [mm (in)] 16.25 (0.64) 26.25 (1.03) 34.65 (1.36) 46.25 (1.82) 53.75 (2.12) 68.6 (2.70)
Name plate position CCFCAA
Interface ISO 7368 BA-06-2-A BB-08-2-A BC-09-2-A BD-10-2-A BE-11-2-A BF-12-2-A
CONTROL COVER - DETAILS
NG 16 25 32 40 50 63
Pilot port
Interface ISO 4401
03-02-0-05 03-02-0-05 03-02-0-05 03-02-0-05 03-02-0-05 05-04-0-05
Plug AP,MX,MZ2 + DZ2 G 1/8" G 1/8" G 1/8" G 1/4" G 1/4" G 1/4"
Hex. size [mm] 5 5 5 6 6 6
Torque [Nm (ft-lbs)] 12 (9) 12(9) 12 (9) 27 (20) 27 (20) 27 (20)
Weight [kg (lb)] 1.27 (2.80) 1.9 (4.19) 3.06 (6.75) 6.16 (13.58) 9.04 (19.93) 16.7 (36.82)
EN 5.249.30.
4_05.22
23
Control cover function DRE
NG 16 to 63
Symbol
NG 16 to 25
NG 32 to 50
NG 63
Pressure relief function
FUNCTION
• Control cover especially for complex pressure relief functions with multiple
pilot valves
• Orifice installation option at port P, A, B, T, Z2, C
• Pilot port interface NG6 and NG10 (up to control cover NG50 it can be used
4/2-way pilot valves NG6 or up to control cover NG63 it can be used 4/2-
way pilot valves NG10)
• The control cover DRE can be combined with 2-way cartridge valves with
poppet A and EX.
PRESSURE RELIEF FUNCTION ¹
When using a DRE cover in combination with a 2-way pressure cartridge
valve, a pressure relief valve and a directional valve, a pressure relief
function can be realized.
When the directional valve is energized, port P is connected to A. The
cartridge valve opens when the pressure is higher than the pressure setting
on the pressure relief valve. The spring chamber is relieved by the orifice in
port A.
If the directional valve is de-energized, a pressureless circulation from port A
to port B of the cartridge valve results and the oil flows to the tank after
overcoming the spring force.
Standard models
The orifice configurations possible with this cover are numerous and
dependent on the pilot valve used and the desired function.
For further support with orifice configuration, please contact HYDAC
Fluidtechnik GmbH.
NG Code Part no.
16 LD-CCE 16 H 6 DRE/N 4480068
25 LD-CCE 25 H 6 DRE/N 4480069
32 LD-CCE 32 H 6 DRE/N 4480070
40 LD-CCE 40 H 6 DRE/N 4480071
50 LD-CCE 50 H 6 DRE/N 4480072
63 LD-CCE 63 H 6 DRE/N 4480073
a
¹ see chart „Possible valve combinations“ on page 26
Hint: Spare parts seal kits see brochure 5.249.19 ,,Accessories for Industrial Valves“
EN 5.249.30. 4_05.22
24
DIMENSIONS
NG 16 to 50
NG 63
NG 16 25 32 40 50 63
B1 [mm (in)] 80 (3.15) 85 (3.35) 102 (4.02) 125 (4.92) 140 (5.51) 180 (7.09)
B2 [mm (in)] 65 (2.56) 85 (3.35) 102 (4.02) 125 (4.92) 140 (5.51) 180 (7.09)
H [mm (in)] 35 (1.38) 35 (1.38) 45 (1.77) 60 (2.36) 60 (2.36) 80 (3.15)
L1 [mm (in)] - - 50.9 (2.00) 62.5 (2.46) 70 (2.76) 84.15 (3.31)
L2 [mm (in)] - - 3.5 (0.14) 4.5 (0.18) 4.5 (0.18) 4.5 (0.18)
L3 [mm (in)] 1.5 (0.06) 1.5 (0.06) 1.5 (0.06) 1.5 (0.06) 1.5 (0.06) 1.5 (0.06)
L4 [mm (in)] - - 26 (1.02) 33.9 (1.33) 34.5 (1.36) 35 (1.38)
L5 [mm (in)] - - 18 (0.71) 22.9 (0.90) 20 (0.79) 27 (1.06)
L6 [mm (in)] - - 3.5 (0.14) 4.5 (0.18) 4.5 (0.18) 4.5 (0.18)
L7 [mm (in)] 7 (0.28) 23.5 (0.93) 32 (1.26) 43.5 (1.71) 51 (2.01) 63 (2.48)
L8 [mm (in)] 16.25 (0.64) 26.25 (1.03) 34.65 (1.36) 46.25 (1.82) 53.75 (2.12) 68.6 (2.70)
Name plate position CCFCAA
Interface ISO 7368 BA-06-2-A BB-08-2-A BC-09-2-A BD-10-2-A BE-11-2-A BF-12-2-A
CONTROL COVER - DETAILS
NG 16 25 32 40 50 63
Pilot port
Interface ISO 4401
03-02-0-05 03-02-0-05 03-02-0-05 03-02-0-05 03-02-0-05 05-04-0-05
Plug MX, MZ2 + DZ2 - - G 1/8" G 1/4" G 1/4" G 1/4"
Hex. size [mm] - - 5 6 6 6
Torque [Nm (ft-lbs)] - - 12 (9) 27 (20) 27 (20) 27 (20)
Weight [kg (lb)] 1.28 (2.82) 1.67 (3.68) 3.08 (6.79) 6.18 (13.62) 9.07 (20.00) 16.7 (36.82)
EN 5.249.30.
4_05.22
25
Note
The information in this brochure relates
to the operating conditions and
applications described. For
applications not described, please
contact the relevant technical
department.
All technical details are subject to
change without notice.
HYDAC Fluidtechnik GmbH
Justus-von-Liebig-Str.
D-66280 Sulzbach/Saar
Tel: 0 68 97 /509-01
Fax: 0 68 97 /509-598
E-Mail: valves@hydac.com
ACCESSORIES
POSSIBLE VALVE COMBINATIONS
Cover Valves Brochure no.
RM 4WE6/ 4WE10
DB4E + housing DPAT06020-01X (395270) +
locking screw (277643)
5.202/ 5.244.3
5.161/ 5.300
1W 4WE6/ 4WE10 5.202/ 5.244.3
2W 4WE6/ 4WE10 5.202/ 5.244.3
2WR 4WE6/ 4WE10 5.202/ 5.244.3
4W 4WE6/ 4WE10 5.202/ 5.244.3
1WDB 4WE6/ 4WE10
ZW-DB06/ ZW-DB10
5.202/ 5.244.3
5.249.27/ 5.249.28
DRE 4WE6/ 4WE10
ZW-DB06/ ZW-DB10
5.202/ 5.244.3
5.249.27/ 5.249.28
EN 5.249.30. 4_05.22
26
Seal kits
(independent of
cover function)
Nominal size Code Part no.
16 LD-FS 16 H 6/N 4167630
25 LD-FS 25 H 6/N 4167631
32 LD-FS 32 H 6/N 4167632
40 LD-FS 40/50 H 6 /N 4167633
50 LD-FS 40/50 H 6 /N 4167633
63 LD-FS 63 H 6/N 4167655
80 LD-FS 80 H 6/N 4167657
