E 5.906.2/12.10
408
3/2-Solenoid Directional Valve
SAE 8-Cartridge – 350 bar
WK08C-01
SPOOL Type - Direct Operated
19 l/min
350 bar
In the de-energized mode, the valve
allows ow from port 2 to 1 or from 1 to
2, while blocking ow at port 3.
When energized, the valve allows ow
from port 3 to 2 or from 2 to 3, while
blocking ow at port 1.


Operating pressure: 350 bar
Nominal ow: 19 l/min
Internal leakage: 90 cm³/min max.,
at 250 bar and 34 mm²/s
Media operating temp. range: - 20 °C to + 120 °C
Ambient temp. range: - 20 °C to + 60 °C
Fluids: Hydraulic oil to DIN 51524 part 1 and 2
Viscosity: min. 7.4 mm²/s up to max. 420 mm²/s
Filtration: Class 21/19/16 according
to ISO 4406 or cleaner
Material: Valve body: high tensile steel
Spool: hardened and
ground steel
Seals: NBR (standard)
FKM (optional)
Support ring: PTFE
Cavity: FC08-3
Weights: Valve complete: 0.37 kg
Coil only: 0.19 kg
Response time: Energized: 20 - 85 ms
De-energized: 40 - 80 ms
Type of voltage: DC solenoid, AC voltage is rectied
using a bridge rectier built into the coil
Current draw at 20 °C: 1.5 A at 12 V DC
0.8 A at 24 V DC
Pull-in voltage: ±15 % of nominal voltage
Coil duty rating: Continuous up to 115 %
of nominal voltage at 60 °C
ambient temperature

All surfaces zinc-plated and corrosion-proof
All valve parts made of high-strength steel with hardened and ground
components to ensure minimal wear and extended service life
Coil seals protect the solenoid system
Wide variety of connectors available
Rigid design using one-piece body minimizes the effect of eccentricities in cavity
and maximizes reliability
Excellent switching performance by high power HYDAC solenoid
Low pressure drop due to CFD optimized ow-path
E 5.906.2/12.10
409


WK08C-01M-C-N-24DG
Designation
Directional spool valve UNF
Cavity 08
Function code
Type 01 = standard
Option
Omission = No Option
M = Manual Override
BodyandPorts
C = Cartridge Only
Seals
N = NBR
V = FKM
CoilVoltage
DC
12 = 12 V DC
24 = 24 V DC
AC (internally full wave rectied)
115 = 115 V AC
230 = 230 V AC
other voltages on request
CoilConnector
DC: DG = DIN Connector to EN 175301-803
DK = Kostal threaded connection M27x1
DL = Leadwires (2) - 457mm, (18") long
DN = Deutsch connector, 2-pole
DT = AMP Junior Timer, 2-pole, radial
AC: AG = DIN Connector to EN 175301-803
other connection types on request

Pressure drop
Flow rate
Inlineconnectionhousings
Code Partno. Material Ports Pressure
FH083-SB3 560922 Steel, zinc-plated 3/8 BSP 420 bar
FH083-AB3 3011427 Aluminium, clear anodized 3/8 BSP 245 bar
millimeter (inch)
Subject to technical modications

FC08-3
Formtools
Tool Partno.
Rougher FC08-3 175 644
Finisher FC08-3 175 645
Measured at ν = 34 mm²/s
T
Oil
= 46 °C
After loosening mounting
nut, coil can be rotated
through 360° and removed.
7/8 hex
Torque 25
+5
Nm
Manual override, with HNBR rubber cap
Torque 4
+2
Nm
thick
Standardmodels
Modelcode Partno.
WK08C-01-C-N-12DG 3020375
WK08C-01-C-N-24DG 3020388
WK08C-01-C-N-230AG 3043889
HYDACFluidtechnikGmbH
Justus-von-Liebig-Str.
D-66280Sulzbach/Saar
Tel: 0 68 97 / 509-01
Fax: 0 68 97 / 509-598
E-Mail: utec@hydac.com
The information in this brochure
relates to the operating conditions
and applications described.
For applications or operating
conditions not described, please
contact the relevant technical
department.
Subject to technical modications.
NOTE
other models on request
other housings on request
max. without M.O.
millimeter (inch)
Subject to technical modications