101
E 5.506.4/10.14
KHP3K 16 L 1114 06 X . . .
Designation
KHP = 2/2 way manifold ball valve (DN 06 - 50)
KHP3K = 3/2 or 3/3 way manifold mounted ball valve (DN 06 - 50)
Nominal bore
Ball bore (not applicable for KHP)
Switch Function diagram SO No.:
L 0° - 90° ––
L (positive) 0° - 90° - 180° SO 560.1
Materials
Housing, locking screw
1 = Steel
3 = Stainless steel
Ball, control spindle
1 = Steel
3 = Stainless steel
Ball seal
1 = POM (polyacetal)
Soft seal
4 = FKM (Viton)
(other materials on request)
Handle
09 = Without handle
14 = Zincdie-castbolt-onhandlecranked,tted DN06
04 = Zinc die-cast bolt-on handle, cranked DN10
02 = Aluminium clamped handle, cranked DN16 - 25
06 = Steel bolt-on handle, cranked DN32 - 50
Series
(determined by manufacturer)
Special model
T-bore on request
SO560 = Seals on inlet side, negative switching overlap, switch 90°
SO560.1 = Seals on inlet side, positive switching overlap, switch 180°
TT = O-rings for low temperature, temperature range -40 °C to +80 °C
PN up to 500
DN 06 - 50
Model code
(also order example)
Manifold Mounted
Ball Valves
KHP / KHP3K
102
E 5.506.4/10.14
KHP
Manifold mounted ball valve with cranked bolt-on steel handle
KHP3K
3-way manifold mounted ball valve with cranked clamped aluminium handle
Dimensions
System pressure
O-ring
System pressure
O-ring
DN int. Ø L L1 L2 L3 L4 L5 L6 L7 L8 B B1 SW1 A C
06 6 64 8.5 17.5 59 25 8.5 35 35 17.5 40 27 6 60 23
10 9.5 80 7.5 27.5 70 29 10 44 55 19 55 40 9 108 28
16 16 109.4 8.5 41.5 100 44 17 58 83 26.5 60 45 12 163 50
20 20 127 10 48.5 117 51 20 69 97 31 70 51 14 169 59
25 23.5 145 10 57.5 135 62 24 81 115 38 80 60 14 169 59
32 32 176 12 68 165 75 29 96 136 46 100 78 17 228 80
40 38 205 28.5 56 180 84.6 28.5 112 112 56.1 130 95 17 228 80
50 48 245 38 68 220 106 38 136 136 68 149 112 17 228 80
DN SW2 H H1 H2 D D1 D2 D3 T S O-ring Weight
KHP [kg]
Weight
KHP3K [kg]
Pressure
range PN [bar]
06 22 37.5 30 7 6.6 11 6 11.7 1.6 23.2 8x2 0.6 0.55 500
10 30 58 45 8.5 9 14 9.5 15 2 36 10x2.6 1.2 1.2 350
16 36 72.2 55 11 9 14 16 25 2 46 20.29x2.62 2.1 2 350
20 41 87.8 70 11.6 10.5 16.5 20 30 3 59.5 23.39x3.53 3.7 3.6 350
25 50 97.6 80 11.6 10.5 17 23.5 35 3 69 28.17x3.53 5.6 5.4 350
32 65 118.2 100 12 13 19 32 39.4 2.9 84 32.92x3.53 10.9 10.2 350
40 – 117.5 100 12 17.5 26 38 48.4 2.9 82.5 42x3.5 17.5 – 350
50 – 127.5 110 12 22 33 48 55.4 2.9 88.5 49x3.5 24.5 – 350
103
E 5.506.4/10.14
DN Y1 Y2 X1 X2 X3 X4 X5 X6 X7 d2 M Int. hex. screw
ISO 4762
(property class)
Torque
value MA
[Nm] *
06 13.5 27 17.5 35 0 35 35 17.5 17.5 6 M6 M6 - 10.9 13
10 20 40 27.5 55 2.5 46.5 44 21.5 19 9.5 M8 M8 - 10.9 30
16 22.5 45 41.5 83 8.5 66.5 58 35 26.5 16 M8 M8 - 12.9 35
20 25.5 51 48.5 97 10 79 69 41 31 20 M10 M10 - 12.9 60
25 30 60 57.5 115 14 95 81 52 38 23.5 M10 M10 - 12.9 60
32 39 78 68 136 17 113 96 63 46 32 M12 M12 - 12.9 110
40 47.5 95 56 112 0 112 112 56.1 56.1 38 M16 M16 - 12.9 300
50 56 112 68 136 0 136 136 68 68 48 M20 M20 - 12.9 600
*=standardvaluesforfrictioncoefcientµ0.14
Interface for (3-way) manifold mounted ball valve
requiredsurfacenish
on interface area
Dimensional tolerances
ISO 2768 m
* = bore 1 not applicable
for KHP
104
E 5.506.4/10.14
Technical specications
Mounting position: KHP:
Optional
KHP3K:
When pressure is applied from port 2 or 3 to port 1,
some leakage can be expected, depending on the pressure.
Ambient temperature: -10 °C to +80 °C
Nominal pressure: Up to PN 500 (see pressure level)
Operatinguids: MineraloiltoDIN51524Part1andPart2(otheruidsonrequest)
Temperatureofoperatinguid: -10 °C to +80 °C
Spare parts: Seal kits available on request
Accessories: All ball valves can be supplied with the following
options:
Actuator
Limit controls
Lock
HYDAC Accessories GmbH
Hirschbachstr. 2
66280 Sulzbach/Saar
Tel.: +49 (0)6897 - 509-01
Fax: +49 (0)6897 - 509-1009
Internet: www.hydac.com
E-Mail: info@hydac.com
NOTE
The information in this brochure relates to the operating conditions and
applications described.
For applications and operating conditions not described, please contact the relevant
technical department.
Subjecttotechnicalmodications.
DN Øa
H8
Øb
+0.2
Øc Ød Øe f
+1
f1
+0.5
g
-0.05
h
+0.2
I Øk Øl
+0.1
m
+0.2
n
+0.2
o Øp
H11
q Ør
H7
Øs
+0.3
t
±0.1
u v w x
+1
y z
6 12.8 14.4 M16x1.5 17.8
+0,1
24 27.5 27.5 40.55 35 15 6 6 8.3 12.5 3 3 9 9 12.2 33.5 53 0.5 18.5 10.5 2.4
+0,4
0.5
10 22.4 24.4 M26x1.5 26.5
-0,1
32 49.9 50.4 50.9 44 15 9.5 11 14.8 22.8 7 5 13 14 18.2 40 62 1.5 20 15 3 1
16 28.4 30.4 M32x1.5 32.5
-0,1
38 66.55 67.05 67.55 58 23.5 16 16 17.9 26 6 6 17 18 23.2 54.5 86.5 1.5 33
-0,3
18 3 1.5
20 36.4 36.4 M38x1.5 38.4
-0,1
45 80.3 80.8 81.3 69 27 20 21 23.5 32 8 8 18 20 25.2 65 104 - - 19 3 1
25 43.4 44.4 M46x1.5 46.5
-0,1
55 89.3 89.8 90.3 81 29 23.5 26 26.3 36 8 8 18 20 25.2 72 120 1.5 43 20 3 1
Cavity
min. u
min. h
tdepthf1
tdepth
Alternative
(for DN10-25)
max. 0.5 x 45°