Pressure Relief Valve
Poppet type, direct acting
Cartridge-Minivalve – 350 bar
DB06C-01
FEATURES
- All exposed surfaces corrosion-proof
- All valve parts made of high-strength steel with hardened and ground components
to ensure minimal wear and extend service life
- Fast response
- Adjustable under full system pressure
- Adjustable over the u.m. pressure range
- Various pressure ranges up to 350 bar
- Poppet type valve with damped characteristics
SPECIFICATIONS
Operating pressure: max. 350 bar
Nominal flow: max. 20 l/min
Pressure ranges: 0 up to 125 bar
0 up to 210 bar
35 up to 350 bar
Leakage: leakage-free, < max. 0,35 cm³/min at 75%
nominal pressure
Temperature range of operating fluid: Min. – 30°C up to max. +100° C
Ambient temperature range: Min. – 30°C up to max. + 60° C
Fluid: Hydraulic fluid to DIN 51524 T1 + T2
Viscosity range: min. 7,4 mm²/s up to max. 420 mm²/s
Filtration: Class 21 / 19 /16 according
to ISO 4406 or cleaner
MTTF
d
: 150 years
Installation: no orientation restrictions
Materials: Valve body: steel with hardened work
surfaces
Piston: hardened and ground steel
Seals: NBR (Standard)
FKM (optional, temperature
range -20°C up to +120°C)
Back-up rings: TPE-E
Cavity: FC06-2
Weight: 0,068 kg
FUNCTION
The Pressure relief valve DB06C is a
direct acting, spring loaded valve with
damped characteristics. Its job is to limit
the pressure in the system. The spring
acts with a certain force on the piston and
presses it on the valve seat. On the
opposite side the system pressure works
at port 1. If the hydraulic force is lower
than the spring pressure the valve
remains closed. Only if the force is higher,
the valve opens and the flow will be let to
port 2 (tank). If the system pressure is
equal to the spring pressure the valve
closes again.
Attention: Pressure at port 2 increases the
opening pressure! If ports are
interchanged or the pressure adjustment
is higher than the operating pressure, the
function of the valve is invalid.
SYMBOL
up to 20 l/min
up to 350 bar
E 5.141.1 /01.13
UNF
6