HYVA TIPPING VALVE
HT-1220-TNK
1 P Pump connection
2A T1 Tank connection
2B T2 Alternative tank connection
3 C Cylinder connection
4 Pneumatic connection (Tip) 6 mm
5 Pneumatic connection (Lower) 6 mm
6 MPC Measure Pressure Cylinder
(Pressure gauge point)
7 Pressure relief cartridge
8 Adjustment screw (int.hex. 5)
(To adjust the lowering speed)
TIP VALVE HT-TNK-1220-110-P1" Tank (TNK)*
TIP VALVE HT-TNK-1220-135-P1"
TIP VALVE HT-TNK-1220-150-P1" * included with valve
TIP VALVE HT-TNK-1220-170-P1" ** not included with valve
TIP VALVE HT-TNK-1220-190-P1"
TIP VALVE HT-TNK-1220-220-P1"
TIP VALVE HT-TNK-1220-250-P1"
TIP VALVE HT-TNK-1220-280-P1"
TIP VALVE HT-TNK-1220-350-P1"
Specifications ∆p - Q characteristic
Type 3/3 pneumatic operated tipping valve with
proportional lowering
Max. pump flow 220 L/min
Max. pressure 350 bar
Pneumatic pilot pressure 6 - 12 bar
Max. pressure on T-connections 10 bar
Min. filtration 25 µm
Viscosity range min / max 12 / 100 mm²/s (cSt)
Max. starting viscosity 1500 mm²/s (cSt)
Temperature range min / max -40 / 80 °C
Mass 6,1 kg
Subject to change without notice, no rights reserved Page 1/2 DO-E HT-1220-TNK / 2016-6-30 / AD
Mounting instructions: VAL-0022
Oil specifications: OIL-0011
P: G1"
T1: G1/2"
T2: G1"
C: G1"
MPC: G1/4"
• Mount the valve according the mounting instructions • Use the correct washers and adapters in the ports to prevent deformation of the housing. Do not use
adapters with tapered threads • To further prevent deformation of the valve housing, the mounting plate surface or block must be completely flat and smooth •
Do not weld to the valve • Ideal air pressure for valve is 8 bar • Make sure inlet air is dry and clean • Painted black (RAL9005)
3D model is available on request
● TNK: Hyva tank mounting plate