Gli scambiatori di calore aria-olio EMMEGI, sono
impiegati per il raffreddamento di circuiti
oleodinamici usando, come fluido raffreddante, l’aria
ambiente convogliata sulla radiante da una ventola
azionata da un motore elettrico o idraulico.
La massa radiante, in lega d’alluminio ad alta
resistenza, è ottenuta mediante un processo
costuttivo di saldobrasatura sottovuoto.
La particolare configurazione dei condotti aumenta
la turbolenza del fluido e di conseguenza la capacità
di scanbio; inoltre la presenza di speciali turbolatori
sull’ alettatura del pacco radiante, migliora
ulteriormente il coefficiente di trasmissione totale.
Il risultato è un prodotto tecnologicamente avanzato
di dimensioni contenute, leggero e robusto.
Fluidi compatibili
. OIL MINERALI, HL, HLP.
. EMULSIONI ACQUA-OLIO
. ACQUA-GLICOLE
. Per altri fluidi consultare EMMEGI.
Specifiche tecniche Masse Radianti
. Materiale: alluminio “long life”.
. Pressione d’esercizio: 20 bar.
. Pressione di collaudo: 35 bar.
. Temperatura max d’esercizio: 120°c
. Per particolari atmosfere aggressive consultare
l’EMMEGI.
Installazione
Lo scambiatore può essere montato in posizione
orrizontale o verticale, rispettando la distanza
minima dalla parete ( vedi fig. 1 ), in modo da
assicurare un naturale afflusso e deflusso dell’ aria di
raffreddamento.
Lo scambiatore è installato di norma, sulle tubazioni
di ritorno dell’ olio del serbatoio; deve inoltre essere
protetto da urti e vibrazioni meccaniche mediante
supporti e collegato all’ impianto con tubazioni
flessibili. É necessario evitare che sia sottoposto a
brusche variazioni di portata, colpi d’ ariete e
pulsazioni continue che danneggiano in modo
irreversibile la radiante.
Per preservare lo scambiatore dalla sovrapressione
che si genera all’ avviamento dell’ impianto per
elevata viscosità dell’ olio, si suggerisce l’ inserimento
di una valvola di by-pass ( vedi fig.2 ).
EMMEGI air-oil heat exchangers are used for cooling
oil hydraulic systems using as the coolant ambient air
that passes over the radiant by means of a fan
operated by an electric or hydraulic motor.
The cooler element, in high resistance aluminium alloy,
is obtained by means of a braze-welding process
carried out under vacuum.
The particular configuration of the cooling pipes
increase the turbulence of the fluid consequently of the
exchange capacity; moreover, the presence of special
jets on the cooler finning further improves the total
transmission coefficient.
The result is a very small, light and robust
technologically advanced product.
Compatible fluids
. MINERAL OILS; HL; HLP.
. WATER-OIL EMULSION.
. WATER-GLYCOL.
. Consults EMMEGI for other fluids.
Technical specification of Cooler
Element
. Material: “long life” aluminium.
. Operating pressure: 20 bar
. Test pressure: 35 bar.
. Max operating temperature: 120°c.
. For specially “ aggressive” atmospheres contact
EMMEGI.
Installation
The exchangers can be fitted in a horizontal position,
respecting the minimum distance from the wall (see
fig.1) so as to ensure a natural flow of cooling air.
The exchangers is usually installed on oil tank return
piping; it must also be protected from impacts and
mechanical vibrations by supports and must be
connected to the plant with flexible pipes.
Avoid subjecting the exchanger to sudden changes in
flow, hammering and pulsations that can cause
irreversible damage to the element.
We recommend installing a by-pass valve ( see fig.2 ) to
protect the exchanger from over-pressure generated
when the plants is started up due to high oil viscosity.
2
www.emmegi-heat-exchangers.com
Introduzione Introduction