EATON Screw-In Cartridge Valves E-VLSC-MC001-E September 2011A-910.B
An Eaton Brand
SV9A-10-E - Solenoid Valve
4-way, 3-position spool type solenoid valve
Up to 36 L/min (9.5 USgpm) • 210 bar (3000 psi)
Description
This is a 4 way 3 position,
direct acting, spool type sole-
noid valve. All ports closed in
the de-energized position. This
valve is ideal for small flow
applications where an actuator
needs to be moved in both
directions and stopped in any
position.
Operation
In the de-energized position all
ports are closed. When sole-
noid 'A' is energized flow is
allowed from port 3 to port 4
and port 2 to port 1.
When solenoid 'B' is ener-
gized flow is allowed from port
3 to port 2 and from port 4 to
port 1.
Features
Hardened, ground and honed
working parts to limit leakage.
IP69K Tough coil compatibility.
Continuously rated. Compact
design with low pressure drop.
Rated pressure on all ports.
Ratings and Specifications
Figures based on Viscosity 32 cST (150 SSU)
Max working pressure 210 bar (3000 psi)
Rated flow 36 L/min (9.5 USgpm)
Nominal flow @ 5bar (70 psi Delta P) 23 L/min (6 USgpm)
Internal leakage Less than 120 ml/min past each land 210 bar differential
Temperature range -30° to +120°C (-22° to +248°F)
Cavity C-10-4 (See Section M)
Electrical data See coil data sheet
Torque cartridge into cavity 45 Nm (33 lbs ft)
Mounting position Unrestricted
Fluids All general purpose hydraulic fluids such as
MIL-H-5606, SAE 10, SAE 20 etc
Seal Material Viton
®
with PTFE back up rings
Filtration BS5540/4 Class 18/13 (25 micron or better)
Nominal viscosity range 15 to 250 cSt
Standard housing materials Aluminium alloy
Coil weight 0.36 kg (0.80 lbs) two per valve
Cartridge weight 0.36 kg (0.80 lbs)
Seal kit 889625 (Nitrile)
566080 (Viton)
Viton is a registered trademark of E.I. DuPont
*AC coils must be used with a rectifying connector
Performance DataSectional View
3(P)
2(A)
1(T)
4(B)
BA
Coil B
1
Coil A
4
3
2
Pressure Drop
A - Port 3 to port 2
B - Port 2 to port 1
C - Port 3 to port 1
D - Port 3 to port 4
E - Port 4 to port 1
Flow - L/min
Pressure - psi
Pressure - bar
Flow - US gpm
0 15 30 45 60
0 4.0 7. 9 11.9 15.9
40
30
20
10
0
580
435
290
14 5
0
B
A
C
D
B yellow
A purple
C pink
D blue
E
EATON Screw-In Cartridge Valves E-VLSC-MC001-E September 2011 A-911.b
An Eaton Brand
SV9A-10-F - Solenoid Valve
4-way, 3-position spool type solenoid valve
Up to 36 L/min (9.5 USgpm) • 210 bar (3000 psi)
Description
This is a 4 way 3 position,
direct acting, spool type
solenoid valve. In the de-
energized condition Port 2
and 4 are open to tank with
the inlet port 3 blocked. This
valve is ideal for small flow
applications where an actuator
needs to be moved in both
directions and stopped in any
position while allowing the
service ports to decay to tank
pressure in the de-energized
condition.
Operation
In the de-energized (cen-
ter) position, port 1, port 2,
and port 4 are open to
each other while port 3 is
blocked. When solenoid A is
energized, flow is
directed from port 3 to port
4 and from port 2 to port 1.
When solenoid B is energized,
flow is directed from port 3
to port 2 and from port 4 to
port 1.
Features
Hardened, ground and honed
working parts to limit leakage.
IP69K Tough coil compatibility.
Continuously rated. Compact
design with low pressure drop.
Rated pressure on all ports.
Ratings and Specifications
Figures based on Viscosity 32 cST (150 SSU)
Max working pressure 210 bar (3000 psi)
Rated flow 36 L/min (9.5 USgpm)
Nominal flow @ 5bar (70 psi Delta P) 23 L/min (6 USgpm)
Internal leakage Less than 120 ml/min past each land 210 bar differential
Temperature range -30° to +120°C (-22° to +248°F)
Cavity C-10-4 (See Section M)
Electrical data See coil data sheet
Torque cartridge into cavity 45 Nm (33 lbs ft)
Mounting position Unrestricted
Fluids All general purpose hydraulic fluids such as
MIL-H-5606, SAE 10, SAE 20 etc
Seal Material Standard nitrile with PTFE back – up rings
Filtration BS5540/4 Class 18/13 (25 micron or better)
Nominal viscosity range 15 to 250 cSt
Standard housing materials Aluminium alloy
Coil weight 0.36 kg (0.80 lbs) two per valve
Cartridge weight 0.36 kg (0.80 lbs)
Seal kit 889625 (Nitrile)
566080 (Viton)
Viton is a registered trademark of E.I. DuPont
Performance DataSectional View
Coil B
1
Coil A
4
2
3
Coil A
3(P)
2(A)
1(T)
4(B)
BA
Pressure Drop
A - Port 3 to port 2
B - Port 2 to port 1
C - Port 3 to port 1
D - Port 3 to port 4
E - Port 4 to port 1
Flow - L/min
Pressure - psi
Pressure - bar
Flow - US gpm
0 15 30 45 60
0 4.0 7. 9 11.9 15.9
40
30
20
10
0
580
435
290
145
0
B
A
C
D
EATON Screw-In Cartridge Valves E-VLSC-MC001-E September 2011A-912.B
An Eaton Brand
3(P)
2(A)
1(T)
4(B)
BA
SV9A-10-B - Solenoid Valve
4-way, 3-position spool type solenoid valve
Up to 40 L/min (10.5 USgpm) • 210 bar (3000 psi)
Description
This is a 4 way 3 position,
direct acting, spool type sole-
noid valve. In the de-energized
condition all ports are open
to tank. This valve is ideal
for small flow applications
where an actuator needs to be
moved in both directions.
Operation
In the de-energized position all
ports are open. When solenoid
'A' is energized flow is allowed
from port 3 to port 4 and port
2 to port 1.
When solenoid 'B' is ener-
gized flow is allowed from port
3 to port 2 and from port 4 to
port 1.
Features
Hardened, ground and honed
working parts to limit leakage.
IP69K Tough coil compatibility.
Continuously rated. Compact
design with low pressure drop.
Rated pressure on all ports.
Ratings and Specifications
Figures based on Viscosity 32 cST (150 SSU)
Max working pressure 210 bar (3000 psi)
Rated flow 40 L/min (10.5 USgpm)
Nominal flow @ 5bar (70 psi Delta P) 26 L/min (6.9 USgpm)
Internal leakage Less than 120 ml/min past each land 210 bar differential
Temperature range -30° to +120°C (-22° to +248°F)
Cavity C-10-4 (See Section M)
Electrical data See coil data sheet
Torque cartridge into cavity 45 Nm 33 lbs ft)
Mounting position Unrestricted
Fluids All general purpose hydraulic fluids such as
MIL-H-5606, SAE 10, SAE 20 etc
Seal Material Standard nitrile with PTFE back up rings
Filtration BS5540/4 Class 18/13 (25 micron or better)
Nominal viscosity range 15 to 250 cSt
Standard housing materials Aluminium alloy
Coil weight 0.36 kg (0.80 lbs) two per valve
Cartridge weight 0.36 kg (0.80 lbs)
Seal kit 889625 (Nitrile)
566080 (Viton)
Viton is a registered trademark of E.I. DuPont
Performance DataSectional View
Pressure Drop
Coil B
1
Coil A
4
3
2
A - Port 3 to port 2
B - Port 2 to port 1
C - Port 3 to port 1
D - Port 3 to port 4
E - Port 4 to port 1
Flow - L/min
Pressure - psi
Pressure - bar
Flow - US gpm
0 15 30 45 60
0 4.0 7. 9 11.9 15.9
40
30
20
10
0
580
435
290
145
0
B
A
C
D
E
EATON Screw-In Cartridge Valves E-VLSC-MC001-E September 2011 A-913.b
An Eaton Brand
3(P)
2(A)
1(T)
4(B)
BA
SV9A-10-A - Solenoid Valve
4-way, 3-position spool type solenoid valve
Up to 25 L/min (6.5 USgpm) • 210 bar (3000 psi)
Description
This is a 4 way 3 position,
direct acting, spool type sole-
noid valve. In the de-energized
condition the inlet Port 3 is
open to tank with port 2 and
4 blocked. This valve is ideal
for small flow applications
where an actuator needs to
be moved in both directions.
In the de-energized condition
inlet flow is allowed to tank.
Operation
In the central de-energized
position. Flow is allowed from
inlet port 3 to port 1 and ports
2 and 4 are blocked. When
solenoid 'B' is energized flow
is allowed from port 3 to 4 and
port 2 to 1.
When solenoid 'A' is ener-
gized flow is allowed from port
3 to port 2 and from port 4 to
port 1.
Features
Hardened, ground and honed
working parts to limit leakage.
IP69K Tough coil compatibility.
Continuously rated. Compact
design with low pressure drop.
Rated pressure on all ports.
Ratings and Specifications
Figures based on Viscosity 32 cST (150 SSU)
Max working pressure 210 bar (3000 psi)
Rated flow 25 L/min (6.5 USgpm)
Nominal flow @ 5bar (70 psi Delta P) 18 L/min (4.8 USgpm)
Internal leakage Less than 120 ml/min past each land 210 bar differential
Temperature range -30° to +120°C (-22° to +248°F)
Cavity C-10-4 (See Section M)
Electrical data See coil data sheet
Torque cartridge into cavity 45 Nm (33 lbs ft)
Mounting position Unrestricted
Fluids All general purpose hydraulic fluids such as
MIL-H-5606, SAE 10, SAE 20 etc
Seal Material Standard nitrile with PTFE back up rings
Filtration BS5540/4 Class 18/13 (25 micron or better)
Nominal viscosity range 15 to 250 cSt
Standard housing materials Aluminium alloy
Coil weight 0.36 kg (0.80 lbs) two per valve
Cartridge weight 0.36 kg (0.80 lbs)
Seal kit 889625 (Nitrile)
566080 (Viton)
Viton is a registered trademark of E.I. DuPont
Performance DataSectional View
Pressure Drop
4
3
1
2
Coil B
Coil A
A - Port 3 to port 2
B - Port 2 to port 1
C - Port 3 to port 1
D - Port 3 to port 4
E - Port 4 to port 1
0
5
10
15
20
25
30
35
40
0510 15 20 25 30 35 40
Flow (L/min)
Pressure (bar)
3 to 2 3 to 4
2 to 1 4 to 1
3 to 1
Flow - L/min
Pressure - psi
Pressure - bar
Flow - US gpm
0 10 20 30 40
0 2.6 5.2 7.8 10.4
40
30
20
10
0
580
435
290
145
0
B
A
C
D
E
EATON Screw-In Cartridge Valves E-VLSC-MC001-E September 2011A-914.B
An Eaton Brand
SV9A-10 - Solenoid Valve
Dimensions
mm (inch)
Note: When solenoid valve is
ordered as cartridge only, coil
nut is included.
When solenoid valve is
ordered without coils, it will
be supplied with only the nut.
The spacer must be ordered
separately.
This valve uses the
L series, 30W coil.
Installation Drawing (Steel)Cartridge Only
Spare Parts
Coil nut 6025028-001
4
2
27.00 A/F
1
3
Ø15.80 (0.62)
62.50
(2.46)
Ø19.00 (0.75)
Ø17.40 (0.68)
7/8”-14-UNF-2A
12.50
(0.49)
136.00
(5.35)
21.75
(0.86)
49.05 (1.93)
22.00 A/F
54.70
(2.15)
54.70
(2.15)
15.00
(0.59)
63.50 (2.50)
2 holes Ø7.1
(0.28) thro’
34.50
(1.36)
31.80 (1.25)
50.80 (2.00)
6.35 (0.25)
73.20
(2.88)
3
4
2
1
82.60
(3.25)
18.50
(0.73)
50.50
(1.99)
16.00 (0.63)
31.80
(1.25)
EATON Screw-In Cartridge Valves E-VLSC-MC001-E September 2011 A -915.b
An Eaton Brand
3(P)
2(A)
1(T)
4(B)
AB
3(P)
2(A)
1(T)
4(B)
AB
1
These model digits are not stamped on
the valve.
Model Code
SV9A-10 - Solenoid Valve
4-way, 3-position spool type solenoid valve
Up to 40 L/min (10.5 USgpm) • 210 bar (3000 psi)
1 2 3 4 7 10
SV9A 10 * *
5
*
8
****** L
11
00
9
*–– – – –
12
00
6
*
1
Function
SV9A - Solenoid valve
2
Size
10 - 10 size
3
Seal Material
Blank - Buna-N
V - Viton
5
Manual Override Option
Blank - No manual override
M - Manual override
For valve dimensions with manual
override, see pages A-961.
6
Housing Material
Blank - Cartridge only
A - Aluminum
Code Port Size Housing N umber
Aluminium
0 Cartridge only
3G 3/8" BSP B19240
4G 1/2" BSP B19228
8T 1/2" SAE B19229
7
Port Sizes
8
Voltage R ating
1
(Omit if not required)
00 - No coil
012D - 12VDC
024D - 24VDC
036D - 36VDC
024A - 24VAC
115A - 115VAC
230A - 230VAC
012B - 12VDC/w diode*
024B - 24VDC/w diode*
*Optional arc suppression diode.
9
Connector Types
1
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Leadwire
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
10
Coil Series
1
(Omit if not required)
Blank - No Coil
L - 10 series, 30W
11
Coil Special Features
1
Blank - None
12
Valve Special Features
1
00 - None
(Only required if valve has special features,
omitted if “00.”)
4
Spool Center Condition
3(P)
2(A)
1(T)
4(B)
AB
3(P)
2(A)
1(T)
4(B)
AB
A
E
B
F