EATON Screw-In Cartridge Valves Data Sheets E-VLSC-MC001-E September 2011B-2.A
An Eaton Brand
SV9-10-A - Solenoid Valve
4-way, 3-position spool type solenoid valve
Up to 19 L/min (5 USgpm) • 210 bar (3000 psi)
Description
The SV9-10-A is a 4-way,
3-position, direct acting, spool
type directional
control valve.
Operation
In the de-energized position,
this valve allows flow from
port 3 to port 1 and blocks
ports 2 and 4. When solenoid
1 (S1) is energized, flow is
directed from port 3 to port 2
and from port 4 to port 1.
When solenoid 2 (S2) is
energized, flow is directed
from port 3 to port 4 and from
port 2 to port 1.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Fatigue pressure 3,000 psi per NFPA/T2-6-1 R2-2000
Rated burst pressure (626 bar) 9090 psi per NFPA/T2-6-1 R2-2000
Max flow 5 USgpm
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Coil power 23W
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0.95Kg (2.1 lbs)
Seal kit 889625 (Buna-N), 566080 (Viton
®
)
Internal leakage 246 cm
3
/min (15 in
3
/min) max. @ 210 bar (3000 psi)
Viton is a registered trademark of E.I. DuPont
Endurance tested to 1 million cycles at full rated flow and pressure.
Performance DataSectional View
Pressure Drop
Cartridge Only
2
4
3
1
PTS9-16
PFRD-XX
PFRS-XX
SV9-8A
SV9-8B
SV9-8E
SV9-8F
4
5
3
2
1
4
CF
2
EF
5
LS
1
3
P
4
CF
2
EF
5
LS
1
3
P
2
4
3
1
2
4
3
1
2
4
3
1
S1
S2
S1
S2
S1
S2
S1
S2
"S1"
"S2"
Flow - USgpm (105 SUS oil @ 120°F)
Pressure Drop - psi
0
10
20
30
40
50
60
70
80
90
100
0123 4
C
B
A
5
A - Port 3 to port 1,
de-energized
B - Port 3 to port 2,
port 3 to port 4
C - Port 2 to port 1,
port 4 to port 1
EATON Screw-In Cartridge Valves Data Sheets E-VLSC-MC001-E September 2011 B-3.A
An Eaton Brand
SV9-10-B - Solenoid Valve
4-way, 3-position spool type solenoid valve
Up to 23 L/min (6 USgpm) • 210 bar (3000 psi)
Description
The SV9-10-B is a 4-way,
3-position, direct acting, spool
type directional valve.
Operation
In the de-energized position,
all ports are open to each
other. When solenoid 1 (S1)
is energized, flow is directed
from port 3 to port 4 and from
port 2 to port 1.
When solenoid 2 (S2) is
energized, flow is directed
from port 3 to port 2 and from
port 4 to port 1.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Fatigue pressure 3,000 psi per NFPA/T2-6-1 R2-2000
Rated burst pressure (626 bar) 9090 psi per NFPA/T2-6-1 R2-2000
Max flow 6 USgpm
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Coil power 26W
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0.95 Kg (2.1 lbs)
Seal kit 889625 Buna-N, 566080 (Viton
®
)
Internal leakage 246 cm
3
/min (15 in
3
/min) max. @ 210 bar (3000 psi)
Viton is a registered trademark of E.I. DuPont
Endurance tested to 1 million cycles at full rated flow and pressure.
Performance DataSectional View
Pressure Drop
Cartridge Only
2
4
3
1
PTS9-16
PFRD-XX
PFRS-XX
SV9-8A
SV9-8B
SV9-8E
SV9-8F
4
5
3
2
1
4
CF
2
EF
5
LS
1
3
P
4
CF
2
EF
5
LS
1
3
P
2
4
3
1
2
4
3
1
2
4
3
1
S1
S2
S1
S2
S1
S2
S1
S2
"S1"
"S2"
Flow - USgpm (105 SUS oil @ 120°F)
Pressure Drop - psi
0
10
20
30
40
50
60
70
80
90
100
110
120
130
01234
C
D
E
B
A
56
A - Port 3 to port 1,
de-energized
B - Port 3 to port 2,
port 3 to port 4
C - Port 4 to port 1,
port 2 to port 1,
de-energized
D - Port 2 to port 1
E - Port 4 to port 1
EATON Screw-In Cartridge Valves Data Sheets E-VLSC-MC001-E September 2011B-4.A
An Eaton Brand
SV9-10-E - Solenoid Valve
4-way, 3-position spool type solenoid valve
Up to 23 L/min (6 USgpm) • 210 bar (3000 psi)
Description
The SV9-10-E is a 4-way,
3-position, direct acting, spool
type directional valve.
Operation
In the de-energized
(center) position, all ports are
blocked. When solenoid 1 (S1)
is energized, flow is directed
from port 3 to port 4 and from
port 2 to port 1.
When solenoid 2 (S2) is
energized, flow is directed
from port 3 to port 2 and from
port 4 to port 1.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Fatigue pressure 3,000 psi per NFPA/T2-6-1 R2-2000
Rated burst pressure (626 bar) 9090 psi per NFPA/T2-6-1 R2-2000
Max flow 6 USsgpm
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Coil power 26W
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0.95 Kg (2.1 lbs)
Seal kit 889625 (Buna-N), 566080 (Viton
®
)
Internal leakage 246 cm
3
/min (15 in
3
/min) max. @ 210 bar (3000 psi)
Viton is a registered trademark of E.I. DuPont
Endurance tested to 1 million cycles at full rated flow and pressure.
Performance DataSectional View
Pressure Drop
Cartridge Only
2
4
3
1
PTS9-16
PFRD-XX
PFRS-XX
SV9-8A
SV9-8B
SV9-8E
SV9-8F
4
5
3
2
1
4
CF
2
EF
5
LS
1
3
P
4
CF
2
EF
5
LS
1
3
P
2
4
3
1
2
4
3
1
2
4
3
1
S1
S2
S1
S2
S1
S2
S1
S2
"S1"
"S2"
Flow - USgpm (105 SUS oil @ 120°F)
Pressure Drop - psi
0
10
20
30
40
50
60
70
80
90
100
0123 45
B
A
6
A - Port 3 to port 2,
port 3 to port 4
B - Port 2 to port 1,
port 4 to port 1
EATON Screw-In Cartridge Valves Data Sheets E-VLSC-MC001-E September 2011 B-5.A
An Eaton Brand
SV9-10-F - Solenoid Valve
4-way, 3-position spool type solenoid valve
Up to 23 L/min (6 USgpm) • 210 bar (3000 psi)
Description
The SV9-10-F is a 4-way,
3-position, direct acting, spool
type directional valve.
Operation
In the de-energized
(center) position, port 1, port
2, and port 4 are open to
each other while port 3 is
blocked. When solenoid 1 (S1)
is energized, flow is
directed from port 3 to port
4 and from port 2 to port
1. When solenoid 2 (S2) is
energized, flow is directed
from port 3 to port 2 and from
port 4 to port 1.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Fatigue pressure 3,000 psi per NFPA/T2-6-1 R2-2000
Rated burst pressure (626 bar) 9090 psi per NFPA/T2-6-1 R2-2000
Max flow 6 USgpm
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Coil power 26W
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0.95 Kg (2.1 lbs)
Seal kit 889625 (Buna-N), 566080 (Viton
®
)
Internal leakage 246 cm
3
/min (15 in
3
/min) max. @ 210 bar (3000 psi)
Viton is a registered trademark of E.I. DuPont
Endurance tested to 1 million cycles at full rated flow and pressure.
Performance DataSectional View
Pressure Drop
Cartridge Only
A - Port 3 to port 2,
port 3 to port 4
B - Port 2 to port 1,
port 4 to port 1
2
4
3
1
PTS9-16
PFRD-XX
PFRS-XX
SV9-8A
SV9-8B
SV9-8E
SV9-8F
4
5
3
2
1
4
CF
2
EF
5
LS
1
3
P
4
CF
2
EF
5
LS
1
3
P
2
4
3
1
2
4
3
1
2
4
3
1
S1
S2
S1
S2
S1
S2
S1
S2
"S1"
"S2"
EATON Screw-In Cartridge Valves Data Sheets E-VLSC-MC001-E September 2011B-6.A
An Eaton Brand
2
4
3
1
PTS9-16
PFRD-XX
PFRS-XX
SV9-8A
SV9-8B
SV9-8E
SV9-8F
4
5
3
2
1
4
CF
2
EF
5
LS
1
3
P
4
CF
2
EF
5
LS
1
3
P
2
4
3
1
2
4
3
1
2
4
3
1
S1
S2
S1
S2
S1
S2
S1
S2
2
4
3
1
PTS9-16
PFRD-XX
PFRS-XX
SV9-8A
SV9-8B
SV9-8E
SV9-8F
4
5
3
2
1
4
CF
2
EF
5
LS
1
3
P
4
CF
2
EF
5
LS
1
3
P
2
4
3
1
2
4
3
1
2
4
3
1
S1
S2
S1
S2
S1
S2
S1
S2
2
4
3
1
PTS9-16
PFRD-XX
PFRS-XX
SV9-8A
SV9-8B
SV9-8E
SV9-8F
4
5
3
2
1
4
CF
2
EF
5
LS
1
3
P
4
CF
2
EF
5
LS
1
3
P
2
4
3
1
2
4
3
1
2
4
3
1
S1
S2
S1
S2
S1
S2
S1
S2
2
4
3
1
PTS9-16
PFRD-XX
PFRS-XX
SV9-8A
SV9-8B
SV9-8E
SV9-8F
4
5
3
2
1
4
CF
2
EF
5
LS
1
3
P
4
CF
2
EF
5
LS
1
3
P
2
4
3
1
2
4
3
1
2
4
3
1
S1
S2
S1
S2
S1
S2
S1
S2
1
These model digits are not stamped on
the valve.
Model Code
SV 9-10 - Solenoid Valve
4-way, 3-position spool type solenoid valve
Up to 23 L/min (6 USgpm) • 210 bar (3000 psi)
1 2 3 4 7 10
SV9 10 * *
5
*
8
****** J
11
00
9
*–– – – –
12
00
6
*
1
Function
SV9 - Solenoid valve
2
Size
10 - 10 size
3
Seal Material
Blank - Buna-N
V - Viton
5
Manual Override Option
Blank - No manual override
M - Manual override
6
Housing Material
0 - Cartridge only
A - Aluminum
S - Steel
Code Port Size Housing Number
Aluminium Aluminium
Light Duty Fatigue Rated
Blank Cartridge only
3B 3/8” BSPP 02-179705
2G 1/4” BSPP 876709
3G 3/8” BSPP 876715
6H SAE 4 876708
8H SAE 6 876713
6T SAE 6 566161
See section J for housings.
7
Port Sizes
(These model digits are not stamped on the valve.)
8
Voltage Rating
1
00 - No coil
012D - 12VDC
024D - 24VDC
036D - 36VDC
024A - 24VAC
115A - 115VAC
230A - 230VAC
012B - 12VDC/w diode*
024B - 24VDC/w diode*
*Optional arc suppression diode.
9
Connector Types
1
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Leadwire
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
10
Coil Series
1
Blank - No Coil
J - 10 series, 23W
11
Coil Special Features
1
Blank - None
12
Valve Special Features
1
00 - None
(Only required if valve has special features,
omitted if “00.”)
4
Spool Center Condition
A B
E F
EATON Screw-In Cartridge Valves Data Sheets E-VLSC-MC001-E September 2011 B-7.A
An Eaton Brand
SV 9-10 - Solenoid Valve
Dimensions
mm (inch)
Torque cartridge in aluminum
or steel housing
34-41 Nm (25-30 ft. lbs).
Valve is shown with “W” coil.
See other coils in Section C.
Note: When solenoid valve is
ordered as cartridge only, coil
nut is included.
When solenoid valve is
ordered without coils, it will
be supplied with only the nut.
The spacer must be ordered
separately.
This valve uses the
J series, 23 W coil.
Spare Parts
Coil nut 565558
Coil spacer 02-179226
116.1
(4.57)
61.8
(2.43)
138.3
(5.44)
61.8
(2.43)
"S1"
"S2"
"S2"
"S1"
Manual
override
option
Ø 38,9
(1.53)
29,6
(1.16)
Ø 38,9
(1.53)
29,6
(1.16)
WARNING
Maintain 5-8 Nm
(4-6 ft. lbs) maximum
torque on valve tube
nut. Over tightening may
cause valve failure.
•