EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 E-410.A
An Eaton Brand
E
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Maximum sequence pressure 165 bar (2400 psi)
Rated flow 23 L/min (6 USgpm)
Cavity C-10–4
Standard housing materials Aluminum
Temperature range -40° to 120°C (-40° to 248°F)
Fluids All general purpose hydraulic fluids such as:
MIL–H–5606, SAE 10, SAE 20, etc.
Filtration Cleanliness Code 18/16/13
Weight cartridge only 0,27 kg (0.60 lbs)
Seal kits 889625 Buna–N
566080 Viton
®
Viton is a registered trademark of E.I. DuPont
PSV10-10 - Pressure Sequence Valve
Spool, direct acting, normally closed, external drain
23 L/min (6 USgpm) • 210 bar (3000 psi)
Operation
When a pre-set pilot pressure
is reached the spool moves
back against the spring
opening the line between inlet
and outlet.
When the pilot pressure falls
the valve will return to its
normal position.
Features
Cartridge design enabling
speedy servicing when
mounted in a body or in a
composite manifold.
Performance DataSectional View
Description
This valve provides a means of
opening a pressure line when
a predetermined pilot pressure
is reached in a normally closed
form.
The valve can be used in any
pilot or small flow system as a
remotely operated sequence
valve.
Pressure Drop Curve
Port 3 to 2,
valve fully open,
spring omitted
Cartridge only
Pressure Drop - psi
Pressure Drop - bar
Flow - USgpm (105 SUS oil @ 120°F)
Flow - L/min (21,8 cSt oil @ 49°C)
0
10
30
40
84 12 16
0 1 2 3 4 5 6
1
2
3
4
20
0
20
50
Caution
When sudden pressure or velocity is applied at port 1,
an orifice disc may be required.
•�
4
3
2
1
1
2
3
4
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 E-411.A
An Eaton Brand
E
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
PSV10-10 - Pressure Sequence Valve
Spool, direct acting, normally closed, external drain
23 L/min (6 USgpm) • 210 bar (3000 psi)
Model Code
PSV10 10 (V)
*
** **
/
**
00
1 2 3 4 5 6 7 8
85,0
(3.34)
Ø 15,80 (0.622)
Ø 17,40 (0.685)
Ø 19.00 (0.748)
3
"C" Adjustm ent
61,9
(2.44)
"S" Adjustm ent
4,8 (0.18) hex
"K" Adjustm ent
Ø 38,1 (1.50)
"I" Adjustm ent
7,9 (0.31) hex
25,4
(1.0)
hex
"F" Adjustm en
t
4
2
1
0.875 "
-14 Thd.
58,0
(2.28)
1 Function
PSV10 - Pressure sequence
valve
2 Size
10 - 10 size
3 Seal material
Blank - Buna-N
V - Viton
®
4 Adjustment
C - Cap
F - Factory set
I - Internal
K - Knob
S - Screw
5 Port Size
0 - Cartridge only
7 Setting pressure
Within ranges in
6
Blank - Normal factory
setting at approximate
mid-range. User requested
settings in 3,45 bar (50 psi)
steps, Coded as in the
following examples:
10 - 70 bar (1000 psi)
10.5 - 72,4 bar (1050 psi)
8 Special features
00 - None
(Only required if valve has special
features, omitted if "00.")
Code Port Size Housing Number
Aluminum Aluminum
Light duty Fatigue rated
3B 3/8" BSPP 02–179705 –
6T SAE 6 566161 –
2G 1/4" BSPP – 876709
3G 3/8" BSPP – 876715
6H SAE 6 – 876708
8H SAE 8 – 876713
See section J for housing.
Dimensions
mm (inch)
Torque cartridge in housing
47-54 Nm (35-40 ft. lbs)
Installation DrawingCartridge Only
– – – – –
6 Sequence Pressure
Range
Note: Code based on pressure
in psi.
2 - 3,5-14 bar (50-200 psi)
4 - 5-28 bar (75-400 psi)
6 - 7-40 bar (100-600 psi)
12 - 14-80 bar (200-1200 psi)
24 - 28-165 bar (400-2400 psi)
76.2
(3.00)
83.8
(3.30)
88.9
(3.50)
57.15
(2.250)
76.2
(3.00)
9.5
(0.38)
7.14
(0.281)
2-Slots
1
4
2
3
52.6
(2.07)
20.8
(0.82)
25.4
(1.00)
36.7
(1.44)
25.4
(1.00)
