EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 E-440.A
An Eaton Brand
E
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
PSV1-10 - Pressure Sequence Valve
Spool, direct acting, normally closed, internal pilot, external drain
23 L/min (6 USgpm) • 210 bar (3000 psi)
Operation
In the normal condition port 2 is
open to the tank port 3 and port
1 is blocked.
When the pressure on port 1
exceeds the setting of the valve
port 1 opens to port 2 and port
3 is blocked but must always be
referenced to tank.
Features
Cartridge design enabling
speedy servicing when
mounted in a body or in a
composite manifold.
Performance DataSectional View
Description
Direct acting sequence
valves are ideal for diverting
oil to a second circuit at a
predetermined pressure as in
clamp and drill circuits, or as a
relief where the back pressure
varies. By taking the drain line
directly to tank, back pressure
effects are negated. In the
valves normal position the
outlet is drained to tank.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Maximum sequence pressure 165 bar (2400 psi)
Rated flow 23 L/min (6 USgpm)
Cavity C-10–3
Standard housing materials Aluminum
Temperature range -40° to 120°C (-40° to 248°F)
Fluids All general purpose hydraulic fluids such as:
MIL–H–5606, SAE 10, SAE 20, etc.
Filtration Cleanliness Code 18/16/13
Weight cartridge only 0,24 kg (0.53 lbs)
Seal kits 565804 Buna–N
889599 Viton
®
Viton is a registered trademark of E.I. DuPont
0
20
40
60
84 12 16
0 21 3 4 5 6
1
2
3
4
Pressure Drop - psi
Pressure Drop - bar
20 24
0
Flow - USgpm (105 SUS oil @ 120°F)
Flow - L/min (21,8 cSt oil @ 49°C)
Pressure Drop Curve
Cartridge only
1
3
2
1
2
3
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 E-441.A
An Eaton Brand
E
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
PSV1-10 - Pressure Sequence Valve
Spool, direct acting, normally closed, internal pilot, external drain
23 L/min (6 USgpm) • 210 bar (3000 psi)
Model Code
PSV1 10 (V)
*
** **
/
**
00
1 2 3 4 5 6 7 8
"I" Adjustm ent
Ø 15,80 (0.622)
Ø 17,40 (0.685)
3
50,0
(1.97)
2
1
0.875"
-14 Thd.
46,0
(1.81)
"F" Adjustm ent
80,0
(3.15)
"C" Adjustm ent
19,1 (0.75) hex
25,4
(1.0)
hex
"S" Adjustm ent
4,8 (0.18) hex
"K" Adjustm ent
Ø 38,1 (1.50)
19,1 (0.75) hex
1 Function
PSV1 - Pressure sequence
valve
2 Size
10 - 10 size
3 Seal material
Blank - Buna-N
V - Viton
®
4 Adjustment
C - Cap
F - Factory set
I - Internal
K - Knob
S - Screw
5 Port Size
0 - Cartridge only
Code Port Size Housing Number
Aluminum Steel
Fatigue rated Fatigue rated
3B 3/8" BSPP 02–173358 –
6T SAE 6 566162 –
2G 1/4" BSPP – 876705
3G 3/8" BSPP – 876714
6H SAE 6 – 876704
8H SAE 8 – 876711
See section J for housing details.
7 Setting Pressure
Within ranges in
6
Blank - Normal factory
setting at approximate
mid-range. User requested
settings in 3,45 bar (50 psi)
steps, Coded as in the
following examples:
10 - 70 bar (1000 psi)
10.5 - 72,4 bar (1050 psi)
8 Special features
00 - None
(Only required if valve has special
features, omitted if "00.")
Dimensions
mm (inch)
Torque cartridge in
aluminum housing to
47-54 Nm (35-40 ft. lbs)
Installation Drawing (Aluminum)Cartridge Only
6 Sequence Pressure
Range
Note: Code based on pressure
in psi.
2 - 3,5-14 bar (50-200 psi)
6 - 7-40 bar (100-600 psi)
12 - 14-80 bar (200-1200 psi)
24 - 25-165 bar (400-2400 psi)
– – – – –
75,4
(2.97)
34,8
(1.37)
25,4
(1.00)
18,8
(.74)
83.8
(3.30)
57.2
(2.25)
75.4
(2.97)
57.15
(2.250)
9.5
(0.38)
2X7,14
(0.281)
1
2
3
50
(1.97)
24,6
(0.97)
