EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009H-140.A
An Eaton Brand
H
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 38 L/min (10 USgpm)
Temperature range –40° to 120°C (–40° to 248°F)
Flow regulation accuracy 0,4–1,9 L/min (0.1–0.49 USgpm) ±20%
1,9–7,5 L/min (0.5–1.99 USgpm) ±15%
7,6–37,8 L/min (2.0–10.0 USgpm) ±10%
Factory set maximum flow rate accuracy under
standard test conditions and within the above ranges
Cavity C-10-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration
Cleanliness code 18/16/13
Standard housing material Aluminum
Weight cartridge only 0,22 kg (.48 lbs)
Seal kit 565803 (Buna-N), 566086 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
FR2-10 - Flow Regulator
Limited range, adjustable pressure compensated
38 L/min (10 Usgpm) • 210 bar (3000 psi)
Operation
This valve maintains a
constant flow from port 1 to
port 2 based on the setting
adjustment, regardless of
pressure changes downstream
on port 2.
Performance Data
Typical Flow Regulation
Cartridge only
Reverse flow from port 2
to port 1 is at the value of
the fixed orifice and is non-
pressure compensated.
Features
Hardened and ground and
honed working components.
Cartridge construction for
maximum mounting flexibility.
9
6
3
0
40
30
20
10
0
70 100 140 210
0 1000 2000500 1500 2500 3000
0
Pressure - bar
Pressure - psi
A
B
17535
Flow - L/min
(21,8 cSt oil @ 49°C)
Flow - USgpm
(105 SUS oil @ 120°F)
Sectional View
Description
This valves is a limited
range adjustable, pressure
compensated, screw-in flow
regulator cartridge valve.
The flow adjustment is from
the factory set maximum flow
rate down to 50% of that
factory set flow rate.
A - 38,0 L/min (10.0 USgpm)
B - 19,0 L/min (5.0 USgpm)
1
2
2
1
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 H-141.A
An Eaton Brand
H
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
FR2-10 - Flow Regulator
Limited range, adjustable pressure compensated
38 L/min (10 Usgpm) • 210 bar (3000 psi)
Model Code
FR 2 10 (V) * *** *.* 00
1 2 3 4 5 6 7
1 Function
FR2 - Flow regulator
2 Size
10 - 10 Size
3 Seal material
Blank - Buna-N
V - Viton
®
4 Adjustment
C - Cap
F - Factory-set
I - Internal
K - Knob
S - Screw
6 Factory set ow rate,
(Specify in USgpm)
Range 0,38–22,7 L/min
(0.1–10.0 USgpm)
7 Special features
00 – None
(Only required if valve has
special features, omitted if “00”)
SS - 316 Stainless Steel
external components
Dimensions
mm (inch)
25,4 (1.00) hex
"I" Adjustment
"F" Adjustment
"K" Adjustment
Ø38,1 (1.5)
"C" Adjustment
19,0 (0,75) hex
Ø15,82 (0.623)
0.875" -14 Thd.
80,0
(3.15)
31,7
(1.25)
53,0
(2.09)
25,4
(1.00)
hex
1
2
"S" Adjustment
4,8 (0.18) hex
Code Port Size Housing Number
Aluminium Aluminium
Light duty Fatigue rated
0 Cartridge only
3B 3/8" BSPP 02–175462 –
6T SAE 6 566151 –
2G 1/4" BSPP – 876702
3G 3/8" BSPP – 876703
6H SAE 6 – 876700
8H SAE 8 – 876701
See section J for housing details.
5 Port Size
Torque cartridge in
aluminum housing to
47-54 Nm (35-40 ft lbs)
Cartridge
Basic Code
FR2-10
Installation Drawing
– – –– –
2 x 7.14
(0.281)
2
19.1
(0.75)
25.4
(1.00)
83.8
(3.30)
63.5
(2.50)
19.0 HEX
(0.75)
25.4 HEX
(1.00)
44.5
(1.75)
9.5
(0.37)
44.46
(1.750)
1
63.5
(2.50)
1
