EATON Screw-In Cartridge Valves E-VLSC-MC001-E November 2009 I-150.A
An Eaton Brand
I
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
1
2
Flow - L/min
145
116
87
58
29
0
10
8
6
4
2
0
0 8 24 40 56 72
0 30 90 150 210 270
Flow - US gpm
Pressure - bar
Operation
With a pilot valve fitted the
valve will only open when flow
is allowed across the orifice in
the middle of the spool. Flow
passing across this orifice will
cause there to be a pressure
difference that acts over the
full area of the spool to move
it back against the spring that
biases it closed. By control-
ling the pressure in the spring
chamber you can control the
pressure at which the valve
opens.
Features
Very versatile in its application
using hardened and ground
spool and sleeve giving minimal
internal leakage and long life.
High flow and pressure rating
increases the variety of applica-
tions into which it can fit.
Performance Data
LE402 - Logic Element
Spool type with control cartridge cavity
350 L/min (95 USgpm) • 350 bar (5000 psi)
Sectional View
Description
For use in conjunction with
pilot valves to allow control
of larger flows. When used
with a 2/2 solenoid valve the
combination allows control of
flows to 350 lts/min (95 US
gpm). With a pilot relief valve
or a proportional relief valve
the element becomes a high
flow pilot style relief. With a
needle valve an on/off function
is achieved. The outlet flow
would normally go to tank
because back pressure will
act on the pilot cartridge to
increase the switching pres-
sure.
Pressure Drop Curve
Ratings and Specifications
Performance data is typical with fluid at 32,0 cST (150 SUS)
Figures based on oil temperature of 40˚ C and viscosity of 40 cSt
Rated Flow 350 liters/min (95 USgpm)
Maximum load induced pressure P1: 350 bar (5000 psi), P2: 210 bar (3000 psi)
Cartridge material Working parts hardened and ground steel.
External surfaces zinc plated
Body material Standard aluminum (up to 210 bar*). Add suffix '377' for steel option
Mounting position Unrestricted
Cavity number C-20-2 (see Section M)
Torque cartridge into cavity 60 Nm (44 lbs. ft.)
Weight LE402: 0.29 kg (0.63 lbs), LE452: 1.35 kg (2.97 lbs)
Seal kit number SK633 (Nitrile), SK633V (Viton
®
)
Viton is a registered trademark of E. I. DuPont
Recommended Filtration Level BS5540/4 Class 18/16/13 (25 micron nominal)
Operating temperature –30° to +90° C (–22° to 194° F)
Leakage Up to 350 ml/min nominal
Nominal viscosity range 5 to 500 cSt
Free ow 1-2
P (1)
T (2)