Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 K-340.A
An Eaton Brand
K
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Maximum regenerative flow 57 L/min (15 USgpm)
Regeneration diminishes progressively above setting of CBV1-10
Temperature range -40° to 120° C (-40° to 248° F)
Fluids All general purpose hydraulic fluids such as:
MIL -H-5606, SAE 10, SAE 20, etc.
Operation
This standard valve package
provides means for fast exten-
sion of a cylinder at low pres-
sure without additional pump
flow. This package diverts rod
end flow to the head end in
order to accelerate the load.
When the load induced pres-
sure reaches a predetermined
level, the valve closes off. Rod
end oil is automatically divert-
ed to tank and the full pump
pressure is applied, allowing
maximum force to develop at
lower speed.
When applying pressure
sensitive regenerative valves
consider the following: Rod to
diameter ratio. The pressure
required to move a cylinder.
Losses due to high flows and
seal friction may prevent a
circuit from staying in regen-
eration.
Features
Automatic kick out of regen-
erative operation made via
load pressure sensing. Tamper
proof and adjustable pres-
sure setting options. Provides
a smooth transition and
decrease of the regenerative
flow through use of a counter-
balance valve. Provides manual
override on POC cartridge to
lower the load in the event of
power loss. Aluminum in-line
type housing.
Performance Data
Description
Pressure sensitive regenera-
tive valve package with load
locking.
Note: Regeneration circuits apply only to single rod cylinders in extension direction.
RLV-10 - Regenerative Valve
With load locking
57 L/min (15 USgpm) • 210 bar (3000 psi)
Pressure Drop
A - Port CR to CH
B - Port VR to CR
C - Port VH to CH
0 1
2 3 4
5 6
7 8 9 10
25
50
75
100
125
150
175
200
225
250
0
5 1 0 15 20 25
1
7
9
11
14
A
B
Pressure - psi
Pressure - bar
Flow - USgpm
Flow - L/min
3
5
0
30 35
40
17
0
C
CH
V
C