EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 D-520.A
An Eaton Brand
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 30 L/min (8 USgpm)
Internal leakage 210 cc/min (13in
3
/min) @ 350 bar (5000 psi)
Temperature range -40°to 120°C(-40° to 248°F)
Pilot pressures 40 - 2,75 bar (40 psi)
80 - 5,5 bar (80 psi)
160 - 11,0 bar (160 psi)
Pilot displacement volume 0,49 cm
3
(0.02 in
3
)
Cavity C-l0-3
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum and Steel
Weight cartridge only 0,10 kg (0.23 lbs)
Seal kit 889624 (Buna-N), 889628 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
PTS17-10 - Pilot to Shift Valve
2/2, pilot operated directional control valve
30 L/min (8 USgpm) • 350 bar (5000 psi)
Performance Data
Operation
This valve allows flow
between ports 2 and 3 until
sufficient pressure at port 1
overcomes the spring bias,
which closes both ports.
The spring chamber for this
valve is externally vented to
atmosphere.
Features
Hardened, ground and honed
sleeve and spool for low
internal leakage. Working
pressure 350 bar.
Description
This is a 2-way 2 position,
high pressure, pilot operated
directional control valve ideal
for isolating a function when
the pilot pressure is applied or
removed.
Sectional View
Pressure Drop Curves
Cartridge only
2
3
1
56
3
1
2
3
2
1
5
4
3
2
1
0
70
60
50
40
30
20
10
0
5 10 15 20 25 30
0 1 2 3 4 5 6 7 8
0
Flow - L/min (21,8 cSt oil @ 49°C)
Flow - USgpm (105 SUS oil @ 120°F)
Pressure Drop - psi
Pressure Drop - bar
1
2
3
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 D-521.A
An Eaton Brand
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
76.2
(3.00)
63.5
(2.50)
57.02
(2.245)
2X Ø7.14
(0.28)
9.7
(0.38)
76.2
(3.00)
1
3
2
22.4
(0.88)
19.1
(0.75)
35.1
(1.38)
22.4
(0.88)
25.7
(1.01)
PTS17-10 - Pilot to Shift Valve
2/2, pilot operated directional control valve
30 L/min (8 USgpm) • 350 bar (5000 psi)
Model Code
PTS17 10 (V) *** ** 00
1 2 3 4 5 6
1 Function
PTS17 - Pilot to shift valve
2 Size
10 - 10 Size
3 Seals
Blank - Buna-N
V - Viton
®
4 Port size
0 - Cartridge only
5 Pilot to shift (nominal)
Note: Code based on pressure in psi.
40 - 2,75 bar (40 psi)
80 - 5,5 bar (80 psi)
160 - 11,0 bar (160 psi)
6 Special features
00 - None
(Only required if valve has spe-
cial features, omitted if “00”)
Code Port Size Housing Number
Aluminum Aluminum
Light Duty Fatigue Rated Steel
A3B 3/8” BSPP 02-173358
A6T SAE 6 566162
A2G 1/4” BSPP 876705
A3G 3/8” BSPP 876714
A6H SAE 6 876704
A8H SAE 8 876711
S2G 1/4” BSPP 02-175127
S3G 3/8” BSPP 02-175128
S6T SAE 6 02-175124
S8T SAE 8 02-175125
See section J for housing details.
•
WARNING
Aluminum housings
can be used for pres-
sures up to 210 bar (3000 psi).
Steel housings must be used
for operating pressures above
210 bar (3000 psi).
Dimensions
mm (inch)
Torque cartridge in aluminum
housing 47-54 Nm (35-40 ft. lbs)
Torque cartridge in steel hous-
ing 68-75 Nm (50-55 ft. lbs)
Installation Drawing (Steel)Cartridge Only
–– ––
25.4 (1.0) Hex
2
3
15.78 - 15.82
(0.621 - 0.623)
25.65
(1.010)
46.0
(1.81)
7/8-14 UNF - 2A THD.
1
17.38 - 17.42
(0.684 - 0.686)
