EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 D-140.A
An Eaton Brand
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 64 L/min (17 USgpm)
Internal leakage 250 cc/min (15in
3
/min) @ 350 bar (5000 psi)
Temperature range -40°to 120°C(-40° to 248°F)
Manual operators D- Lever (3-position detent)*
D2 - Lever (2-position detent)*
K - Knob (2-position, no detent)
Cavity C-l6-3
Fluids All general purpose hydraulic fluids such as:
MIL-H -5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum or Steel
Weight cartridge only 0.53 kg (1.16 lbs)
Seal kit 889632 (Buna-N), 889636 (Viton
®
)
* Light duty housing only.
Viton is a registered trademark of E.I. DuPont
MRV13-16 - Manual Rotary Valve
Manual semi-rotary directional control valve
64 L/min (17 USgpm) • 350 bar (5000 psi)
Description
This is a high pressure 3 way
2 or 3 position manual semi-
rotary directional control valve.
Can be used as a diverter or a
dump valve
Operation
This valve will direct flow
between ports 1 and 3 and block
port 2 in one position.
Performance Data
Sectional View
Pressure Drop Curves
Cartridge only
By turning the operator 90°, flow
will be directed between ports 1
and 2 and port 3 will be blocked.
During cross-over transition, all
ports are blocked.
Features
Hardened, ground and honed
working parts to limit leakage
and prolong life. Various levers
and knobs available with
and without detent. Working
pressure 350 bar.
MRV13-16(V)-D
3 position models
MRV13-16(V)-D2
2 position models
1
2
3
1
2
3
3
1
2
0 10 20 30 40 50 60
0 2 4 6 8 10 12 14 16
2 3
1
0
3
2
1
2
4
6
20
40
60
80
0
Flow - L/min (21,8 cSt oil @ 49°C)
Flow - USgpm (105 SUS oil @ 120°F)
Pressure Drop - psi
Pressure Drop - bar
2
3
1
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 D-141.A
An Eaton Brand
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
26.90 - 26.94
(1.059 - 1.061)
9.5 (0.375) Hex
56.3
(2.22)
74
(2.91)
1 5/16 - 12
38.1 (1.5) Hex
3
2
1
28.50 - 28.54
(1.122 - 1.124)
60.33
(2.375)
90˚
MRV13-16 - Manual Rotary Valve
Manual semi-rotary directional control valve
64 L/min (17 USgpm) • 350 bar (5000 psi)
Model Code
MRV13 16 (V) ** **** 00
1 2 3 4 5 6
1 Function
MRV13 - Manual rotary valve
2 Size
16 - 16 size
3 Seals
Blank - Buna-N
V - Viton
®
4 Manual Operators
0 - No operator
D - Lever
(3-position detent)
D2 - Lever
(2-position detent)
K - Knob
(2-position, no detent)
5 Port Size
0 - Cartridge only
6 Special Features
00 - Non (Only required if valve
has special features, omitted
if “00”)
Code Port Size Housing Number
0 Aluminum
Fatigue rated Steel
A10H SAE 10 876721
A12H SAE 12 876723
A4G 1/2” BSPP 876720
A6G 3/4” BSPP 876722
S4G 1/2” BSPP 02-175131
S6T 3/4” BSPP 02-175132
S10T SAE 10 02-175129
S12T SAE 12 02-175130
Dimensions
mm (inch)
Torque cartridge in housing
A - 108-122 Nm (80-90 ft. lbs)
S - 136-149 Nm (100-110 ft. lbs)
•
WARNING
Aluminum housings
can be used for pres-
sures up to 210 bar (3000 psi).
Steel housings must be used
for operating pressures above
210 bar (3000 psi).
Installation Drawing (Steel)Cartridge Only
– – – –
88.9
(3.50)
76.20
(3.000)
12.7
(0.50)
101.6
(4.00)
2 X Ø 10.31
(0.406)
25.4
(1.00)
1
3
25.4
(1.00)
2
108.0
(4.25)
56.3
(2.22)
25.4
(1.00)
54.0
(2.13)
