EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 D-110.A
An Eaton Brand
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
2
“K” TYPE OPTION
1
3
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage 250 cc/min (15in
3
/min) @ 350 bar (5000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Manual operators D- Lever (3-position detent)*
D2 - Lever (2-position detent)*
E - Ball (3-position detent)*
E2- Ball (2-position detent)*
K- Knob (2-position, no detent)
Cavity C-l0-3
Fluids All general purpose hydraulic fluids such as
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Aluminum or Steel
Weight cartridge only 0,22 kg (0.48 Ibs)
Seal kit 565804 (Buna-N), 889599 (Viton
®
)
* Light duty housing only.
Viton is a registered trademark of E.I. DuPont
MRV13-10 - Manual Rotary Valve
Manual semi-rotary directional control valve
23 L/min (6 USgpm) • 350 bar (5000 psi)
Description
This is a high pressure 3 way
2 or 3 position manual semi-
rotary directional control valve.
Can be used as a diverter or a
dump valve
Operation
This valve will direct flow
between ports 1 and 3 and
block port 2 in one position.
Performance Data
Sectional View
Pressure Drop Curves
Cartridge only
By turning the operator 90°,
flow will be directed between
ports 1 and 2 and port 3 will
be blocked. During cross-over
transition, all ports are blocked.
Features
Hardened, ground and honed
working parts to limit leakage
and prolong life. Various levers
and knobs available with
and without detent. Working
pressure 350 bar.
MRV13-10(V)-D/E
3 position models
MRV13-10(V)-D2/2E
2 position models
1
2
3
1
2
3
20
40
60
80
0
6
4
2
0 5 10
0 2 4 6
A
4
3
2
1
0
13
24
Flow - L/min (21,8 cSt oil @ 49°C)
Flow - USgpm (105 SUS oil @ 120°F)
Pressure Drop - psi
Pressure Drop - bar
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 D-111.A
An Eaton Brand
D
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
MRV13-10 - Manual Rotary Valve
Manual semi-rotary directional control valve
23 L/min (6 USgpm) • 350 bar (5000 psi)
Model Code
MRV13 10 (V) ** *** 00
1 2 3 4 5 6
1 Function
MRV13 - Manual rotary valve
2 Size
10 - 10 Size
3 Seals
Blank - Buna-N
V - Viton
®
4 Manual Operator
0 - No operator
D - Lever (3-position detent)
D2 - Lever (2-position detent)
E - Ball (3-position detent)
E2 - Ball (2-position detent)
K - Knob (2-position, no
detent)
5 Port Size
0 - Cartridge only
6 Special Features
00 - Non (Only required if valve
has special features, omitted
if “00”)
Code Port Size Housing Number
0 Aluminum
Fatigue rated Steel
A2G 1/4” BSPP 02-185804
A3G 3/8” BSPP 02-185805
A6H SAE 6 02-185802
A8H SAE 8 02-185803
S2G 1/4” BSPP 02-175127
S3G 1/3” BSPP 02-175128
S6T SAE 6 02-175124
S8T SAE 8 02-175125
Dimensions
mm (inch)
Torque cartridge in housing
A - 47-54 Nm (35-40 ft. lbs)
S - 68-75 Nm (50-55 ft. lbs)
•
WARNING
Aluminum housings
can be used for pres-
sures up to 210 bar (3000 psi).
Steel housings must be used
for operating pressures above
210 bar (3000 psi).
Installation Drawing (Steel)Cartridge Only
– – – –
76.2
(3.00)
63.5
(2.50)
57.02
(2.245)
2X Ø7.14
(0.28)
9.7
(0.38)
76.2
(3.00)
1
3
2
22.4
(0.88)
19.1
(0.75)
35.1
(1.38)
22.4
(0.88)
51.3
(2.02)
1
2
3
90˚
15.78-15.82
(0.621-0.623)
17.38-17.42
(0.684-0.686)
51.3
(2.02)
46,0
(1.81)
9,5 (0.37) Hex
25.4 (1.0) Hex
7/8 - 14 UNF - 2A Thd.
41.3
(1.63)
