EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 B-160.A
An Eaton Brand
B
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
10
20
15
25
30
5
Pressure Drop - PSID
Flow - USgpm
0 500 1000 1500 2000 2500 3000
Current - Amps
Flow - USgpm
2
4
6
8
10
12
0
0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6
ESV1-8-O - Proportional Valve
Proportional flow control, normally open, poppet
Up to 32 L/min (8.4 USgpm) • 210 bar (3000 psi)
Description
This is a 2 way 2 position, pilot
operated poppet type, normal-
ly open, proportional flow con-
trol screw in cartridge valve.
Ideal for lowering circuits or
in conjunction with pressure
compensators to provide pro-
portional flow control to any
actuator.
Operation
In the de-energized position,
this valve allows free flow from
port 2 to port 1 and restricts
flow from port 1 to port 2.
In the energized position, flow
is blocked from port 2 to port 1,
and free flow is allowed from
port 1 to port 2. The valve flow
is proportional to the current
applied to the coil.
Features
Hardened and ground work-
ing parts to give long life and
very low leakage. IP69K Tough
coil compatibility, continuously
rated. Compact design with
low pressure drop.
1
2
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge endurance rating 1 million cycles
Cartridge fatigue pressure rating (NFPA/T2.6.1 R2-2000) 210 bar (3000 psi)
Rated flow @ 500 psid, 32 L/min (8.4 gpm) min, 35 L/min (9.3 gpm) nom
Leakage (fully closed) 5 drops/min, max @ 3000 psi
Nominal supply voltage 12/24 VDC
Current to fully close valve 1100-1250 mA (12V coil), 550-625 mA (24V coil)
Temperature range -30° to 90°C (-22° to 194°F)
Maximum oil temperature 120°C (248°F)
Maximum internal oil temperature 200°C (392°F)
Cavity C-8-2
Fluids All general purpose hydraulic fluids such as: MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Hysterisis 3.8 L/min (1 USgpm) with dither
Weight cartridge only .10 kg (.23 lbs)
Seal kit 02-165875 (Buna-N), 02-165877 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
Performance Data
1
2
Sectional View
Pressure Drop Curves