EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-860.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Description
This is a 4-way 2-position,
direct acting, high pressure,
spool type solenoid valve. This
valve can be used in applica-
tions where the motion of a
double acting cylinder or a
motor needs to be reversed
Operation
In the de-energized position
this valve allows flow between
port 3 to port 4 and between
port 2 to port 1 in both direc-
tions.
In the energized position flow
is allowed between port 3 to
port 2 and between port 4 to
port 1in both directions.
Features
Hardened, ground and honed
working parts to limit leakage.
IP69K Tough coil compatibility.
Continuously rated. Compact
design with low pressure drop.
Rated pressure on all ports.
Working pressure 350 bar.
Pressure
Drop
Cartridge only
Performance Sectional View
SV17A/B-12-4 - Solenoid Valve
4-way, 2-position, spool type solenoid valve
Up to 46 L/min (12 USgpm) • 350 bar (5000 psi)
A - Port 2 to port 1, port 3 to port 4
B - Port 3 to port 4, port 3 to port 2
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49°C (120°F)
Typical application pressure (all ports except port 1) 350 bar (5000 psi)
Typical application pressure at port 1 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow SV17A-12-4 38 L/min (10 USgpm)
SV17B-12-4 46 L/min (12 USgpm)
Internal leakage 350 cc/min (21.5 in3/min) @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuos from 85% to 110% of nominal voltage
Cavity C-12-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Steel
Weight including coil SV17A-12-4 0.68 kg (1.5 lbs)
SV17B-12-4 0.86 kg (1.9 lbs)
Seal kit 2160979 Buna-N), 2160980 (Viton
®
Viton is a registered trademark of E.I. DuPont
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
0
Pressure Drop (psi)
Flow - US gpm (105 SUS Oil @ 120°F)
0 1 2 3 4 5 6 7 8 9 10 11 12
10
9
8
7
6
5
4
3
2
1
0
A
B
Flow - L/min (21,8 cst Oil @49° C)
5 10 15 20 25 30 35 40 45
Pressure Drop (bar)
2
1
3
4
3
2
1
4
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-861.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
1
2
3
4
90,9 (3.58)
84,9 (3.34)
1.25”
HEX
Torque
22-26
LB-IN
Torque
22-26
LB-IN
MANUAL
OVERDRIVE
MANUAL
OVERDRIVE
43,5 (1.71)
45,9 (1.81)
1.25”
HEX
85,4 (3.36)
50,3
(1.98)
48,7
(1.92)
1.062” -
12 Thread
1.062” -
12 Thread
SV7A-12-4 SV7B-12-4
Ø 22,1 (.872)
Ø 20,6 (.810)
Ø 23,8 (.935)
51.6
(2.03)
31.8
(1.25)
2 Slots
8.75
(.344)
68.28
(02.688)
88.9
(03.50)
10.3
(0.41)
127
(05.00)
28.7
(1.13)
31.8
(1.25)
63.5
(2.500)
84.9
(3.34)
31.7
(1.25) Hex
1
4
2
26.7
(1.05)
101.6
(04.00)
74.4
(2.93)
3
SV17A-12-4 SV17B-12-4
Dimensions
mm (inch)
Torque cartridge in aluminum
housing 81-95 Nm (60-70 ft lbs)
Note: When solenoid valve
is ordered as cartridge only,
nut is included.
Installation Drawing (Steel)Cartridge Only
WARNING
Maintain 2.5-3 Nm
(1.8-2.2 ft lbs)
maximum torque on valve
tube nut. Over tightening
may cause valve failure.
•
SV17A/B-12-4 - Solenoid Valve
4-way, 2-position, spool type solenoid valve
Up to 46 L/min (12 USgpm) • 350 bar (5000 psi)
Model Code
1 2 3 4 8 10
SV17 * 12 *
5
4P
7
**** * **
11
**
9
Coil Types
Blank - No coil
L - L series (30W EN 490)
used for SV17A-12
R - R series (30W)
used for SV17B-12
10
Coil Special Feature
Blank - Noil coil
00 - No special feature
11
Special Features
00 - None
(Only required if valve has special
features omitted if "00".)
1
Function
SV17 - Solenoid valve
2
Max Flow
A - 38 L/min (10 USgpm)
B - 46 L/min (12 USgpm)
3
Size
12 - 12 size
4
Seal Material
Blank - Buna-N
V - Viton
5
Style
4P - 4 way, push type
manual override
7
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
*Optional arc suppression diode.
8
Connector Types
Blank - No coil
G - ISO 4400 DIN 43650
W - Flying lead (DC only)
C - Deutch on Leads
H - Metripak 150 on Leads
F - Weatherpak Male on Leads
For coil part numbers and dimensions
see section C.
6
Port Size
0 - Cartridge only
Code Port Size Housing Number
Aluminium Steel
A6G 3/4” BSPP 5986432-001
A10H SAE 10 5986434-001
A12H SAE 12 5986436-001
S6G 3/4” BSPP 5991073-001
S10T SAE 10 5991074-001
S12T SAE 12 5991075-001
6
****
9
*– – – –
