EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-300.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SV15-8-O/OP/OS - Solenoid Valve
Poppet type, normally open solenoid valve
37 L/min (10 USgpm) • 350 bar (5000 psi)
Description
This is a 2-way, 2-position,
poppet type, high pressure,
pilot operated, normally open
solenoid valve. This valve is
used in applications requir-
ing low leakage, such as load
holding applications or as a
general purpose diverter or
dump valve.
Operation
In the de-energized position
the valve allows free flow from
port 2 to 1 and a restricted
flow through the pilot orifice
from port 1 to 2.
When the solenoid is
energized the pilot poppet
closes the orifice and the valve
closes blocking flow from port
2 to 1 while allowing free flow
from port 1 to 2.
Features
Hardened and ground working
parts. Lapped seat for low
leakage. IP69K Tough coil
compatibility. Continuously
rated. Compact design with
low pressure drop. 350 bar
working pressure.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 37 L/min (10 USgpm)
Internal leakage 5 drops/min, max @ 210 bar (3000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-8-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight cartridge only 0,11 kg (0.25 lbs)
Seal kit 02-165875 (Buna-N), 02-165877 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
Performance Data
Sectional View
A - Port 1 to port 2 energized
B - Port 2 to port 1 de-energized
Pressure Drop
Cartridge only
2
1
Pressure Drop - psi
200
50
150
100
0
250
300
4
8
0
12
16
20
Pressure D rop - bar
A
B
8 160 24 32
Flow - L/m in (21,8 cSt oil @ 49°C)
0 2 4 6 8 10
Flow - USgpm (105 SUS oil @ 120°F)
1
2
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-301.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SV15-8-O/OP/OS - Solenoid Valve
Poppet type, normally open solenoid valve
37 L/min (10 USgpm) • 350 bar (5000 psi)
Model Code
1
Function
SV15 - Solenoid valve
2
Size
8 - 8 size
3
Seal Material
Blank - Buna-N
V - Viton
®
4
Style
O - Normally open
5
Manual Override Option
Blank - No manual override
P - Push type
S - Screw type
For valve dimensions with manual
override option installed see page A-980.
6
Valve Housing Material
Blank - Cartridge only
S - Steel
Code Port Size Housing Number
0 Cartridge only
2G 1/4" BSPP 02-160733
3G 3/8" BSPP 02-160734
4T SAE 4 02-160736
6T SAE 6 02-160737
8T SAE 8 02-160738
See section J for housing details.
7
Port Size
9
Connector Types
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Flying lead
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
10
Coil Series
P - 8 series, 23 W
For coil part numbers and
dimensions see section C.
11
Special Features
00 - None
(Only required if valve has special
features, omitted if “00”.)
1 2 3 4 5 6 7 8 9 10 11
SV15 8 (V) O (*) (S) ** **** * P 00
8
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
36D - 36VDC
24A - 24VAC
115A - 115VAC
230A - 230VAC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
*Optional arc suppression diode.
Dimensions
mm (inch)
Torque cartridge in steel
housing 34-41 Nm (25-30 ft lbs)
Note: When solenoid valve
is ordered as cartridge only,
coil nut is included.
Installation DrawingCartridge Only
WARNING
Maintain 5-8 Nm
(4-6 ft lbs) maximum
torque on valve tube nut.
Over tightening may cause
valve failure.
•
38.1
(1.50)
50.8
(2.00)
2X 7.1
(0.28)
50.8 (2.00)
44.0 (1.73)
3.4
(0.13)
58.4
(2.30)
19.1
(0.75)
15.5
(0.61)
1
2
– – – – –
