EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-110.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Pressure Drop
Cartridge only
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 37 L/min (10 USgpm)
Internal leakage, port 2 to port 1 5 drops/min, max @ 210 bar (3000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-8-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight cartridge only 0,11 kg (0.25 lbs)
Seal kit 02-165875 (Buna-N), 02-165877 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
SV15-8-C/CM - Solenoid Valve
Poppet type, normally closed solenoid valve
37 L/min (10 USgpm) • 350 bar (5000 psi)
Description
This is a 2-way, 2-position,
poppet type, high pressure,
pilot operated, normally closed
solenoid valve. This valve is
used in applications requir-
ing low leakage, such as load
holding applications or as a
general purpose diverter or
dump valve.
Operation
In the de-energized position
the valve blocks flow from port
2 to 1 and free flow is allowed
from port 1 to 2.
When the solenoid is ener-
gized the pilot poppet is pulled
off the seat allowing the valve
to open from port 2 to 1. in the
reverse direction the flow is
restricted by the pilot orifice.
Features
Hardened and ground work-
ing parts. Lapped seat for low
leakage. IP69K Tough coil com-
patibility. Continuously rated.
Compact design with low
pressure drop. 350 bar work-
ing pressure.
Performance DataSectional View
A - Port 1 to port 2
B - Port 2 to port 1
2
1
200
50
150
100
0
0 2 4 6 8 10
250
300
8
160 24 32
4
8
0
12
16
20
Pressure Drop - bar
A
B
Flow - U Sgpm (105 SU S oil @ 120°F)
Flow - L/m in (21,8 cSt oil @ 49º C)
Pressure Drop - psi
1
2
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-111.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SV15-8-C/CM - Solenoid Valve
Poppet type, normally closed solenoid valve
37 L/min (10 USgpm) • 350 bar (5000 psi)
Model Code
1 2 3 4 5 6 9 10
SV15 8 (V) C (M) (S)
8
****
7
** * P
11
00
9
Connector Types
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Flying lead
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
10
Coil Series
P - 8 series, 23 W
For coil part numbers and dimensions
see section C.
11
Special Features
00 - None
(Only required if valve has special
features omitted if “00.”)
1
Function
SV15 - Solenoid valve
2
Size
8 - 8 size
3
Seal Material
Blank - Buna-N
V - Viton
®
4
Style
C - Normally closed
5
Manual Override Option
Blank - No manual override
M - Manual override
For valve dimensions with manual over-
ride option installed see page A-980.
6
Valve Housing Material
Blank - Cartridge only
S - Steel
Code Port Size Housing Number
0 Cartridge only
2G 1/4" BSPP 02-160733
3G 3/8" BSPP 02-160734
4T SAE 4 02-160736
6T SAE 6 02-160737
8T SAE 8 02-160738
See section J for housing details.
7
Port Size
8
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
36D - 36VDC
24A - 24VAC
115A - 115VAC
230A - 230VAC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
*Optional arc suppression diode.
Dimensions
mm (inch)
Torque cartridge in aluminum
or steel housing 34-41 Nm
(25-30 ft lbs)
Note: When solenoid valve is
ordered as cartridge only, coil
nut is included.
WARNING
Maintain 5-8 Nm
(4-6 ft lbs) maximum
torque on valve tube nut.
Over tightening may cause
valve failure.
•
Installation DrawingCartridge Only
– – – –
1
2
38.1
(1.50)
50.8
(2.00)
19.1
(0.75)
15.5
(0.61)
2X 7.1
(0.28)
50.8 (2.00)
44.0 (1.73)
3.4
(0.13)
58.4
(2.30)
