EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-276.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
2
1
SV14-10-C/CM - Solenoid Valve
Spool type, normally closed solenoid valve
23 L/min (6 USgpm) • 350 bar (5000 psi)
Description
This is a 2-way, 2-position,
spool type, high pressure,
direct acting, normally closed
solenoid valve. This valve is
used in applications where
the flow needs to be blocked
in both directions when the
solenoid is de-energized.
Operation
In the de-energized position
the valve blocks flow in both
directions.
When the solenoid is
energized the spool moves
allowing the valve to open in
both directions.
Features
Hardened, ground and honed
working parts to limit leakage.
IP69 Tough coil compatibility.
Continuously rated. Compact
design with low pressure drop.
350 bar working pressure.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage 140 cm
3
/min (8.5 in
3
/min) max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-16-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight cartridge only 0,18 kg (0.39 lbs)
Seal kit 565806 (Buna-N), 889627 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
Performance Data
Sectional View
A - Port 2 to port 1 energized
B - Port 1 to port 2 de-energized
Pressure Drop
Cartridge only
Pressure Drop - psi
Pressure Drop - bar
0 2 4 6
1
5
7100
75
50
25
0
3
0 8 15 23
Flow - L/min (21,8 cSt oil @ 49°C)
Flow - USgpm (105 SUS oil @ 120°F)
1
2
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-277.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SV14-10-C/CM - Solenoid Valve
Spool type, normally closed solenoid valve
23 L/min (6 USgpm) • 350 bar (5000 psi)
Model Code
1
Function
SV14 - Solenoid valve
2
Size
10 - 10 size
3
Seal Material
Blank - Buna-N
V - Viton
®
4
Style
C - Normally closed
5
Manual Override Option
Blank - No manual override
M - Manual override
For valve dimensions with manual
override option installed see
page A-980.
6
Valve Housing Material
Blank - Cartridge only
S - Steel
Code Port Size Housing Number
0 Cartridge only
2G 1/4" BSPP 02-175102
3G 3/8" BSPP 02-175103
6T SAE 6 02-175100
8T SAE 8 02-175101
See section J for housing details.
7
Port Size
9
Connector Types
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Flying lead
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
10
Coil Series
H - 10 Series, 29 W
For coil part numbers and
dimensions see section C.
11
Special Features
00 - None
(Only required if valve has special
features, omitted if “00”.)
1 2 3 4 5 6 7 8 9 10 11
SV14 10 (V) C (M) (S) ** **** * H 00
8
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
36D - 36VDC
24A - 24VAC
115A - 115VAC
230A - 230VAC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
*Optional arc suppression diode.
Dimensions
mm (inch)
Torque cartridge in steel
housing 68-75 Nm
(50-55 ft lbs)
Note: When solenoid valve
is ordered as cartridge only, coil
nut is included.
Cartridge Only
WARNING
Maintain 5-8 Nm
(4-6 ft lbs) maximum
torque on valve tube nut.
Over tightening may cause
valve failure.
•
– – – – –
25,4
(1.00) hex
22,2 (0.875) he x
0.875" – 14 Thd.
Ø 15,82 (.623 )
Ø 38, 9
(1.53)
29, 6
(1.16)
31, 7
(1.25)
1
2
57, 8
(2.28)
