EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-440.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SV14-8-O/OM - Solenoid Valve
Spool type, normally open solenoid valve
13 L/min (3.5 USgpm) • 350 bar (5000 psi)
Description
This is a 2-way, 2-position,
spool type, high pressure,
direct acting, normally open
solenoid valve. This valve is
used in applications where the
flow needs to be blocked in
both directions when the sole-
noid is energized.
Operation
In the de-energized position
the valve is open in both direc-
tions.
When the solenoid is ener-
gized the spool moves caus-
ing the valve to close in both
directions.
Features
Hardened, ground and honed
working parts to limit leakage.
IP69 Tough coil compatibility.
Continuously rated. Compact
design with low pressure drop.
350 bar working pressure.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 13 L/min (3.5 USgpm)
Internal leakage, port 2 to port 1 140 cm3/min (8.5 in3/min) max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-8-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight cartridge only 0,11 kg (0.25 lbs)
Seal kit 02-165875 (Buna-N), 02-165877 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
Performance Data
Sectional View
Pressure
Drop
Port 2 to port 1 de-energized
Port 1 to port 2 de-energized
2
1
Pressure Drop - psi
0
25
50
75
100
125
150
Pressure Drop - bar
2
4
8
10
6
0
0 2 4 6 8 10 12
Flow - L/m in (21,8 cSt oil @ 49°C)
0.5 1.0 1.5 2.0 2.5 3.0 3.50
Flow - USgpm (105 SU S oil @ 120°F)
1
2
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-441.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SV14-8-O/OM - Solenoid Valve
Spool type, normally open solenoid valve
13 L/min (3.5 USgpm) • 350 bar (5000 psi)
Model Code
1
Function
SV14 - Solenoid valve
2
Size
8 - 8 size
3
Seal Material
Blank - Buna-N
V - Viton
®
4
Style
O - Normally open
5
Manual Override Option
Blank - No manual override
M - Manual override
For valve dimensions with manual
override option installed see page A-980.
6
Valve Housing Material
Blank - Cartridge only
9
Connector Types
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Flying lead
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
10
Coil Series
P - 8 series, 23 W
For coil part numbers and
dimensions see section C.
11
Special Features
00 - None
(Only required if valve has special
features, omitted if “00”.)
1 2 3 4 6 8 9 10 11
SV14 8 (V) O
5
(M) (S) **** * P 00
7
**
Code Port Size Housing Number
0 Cartridge only
2G 1/4" BSPP 02-160733
3G 3/8" BSPP 02-160734
4T SAE 4 02-160736
6T SAE 6 02-160737
8T SAE 8 02-160738
See section J for housing details.
7
Port Size
8
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
36D - 36VDC
24A - 24VAC
115A - 115VAC
230A - 230VAC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
*Optional arc suppression diode.
Dimensions
mm (inch)
Torque cartridge in steel or
aluminum housing 34-41 Nm
(25-30 ft lbs)
Note: When solenoid valve
is ordered as cartridge only,
nut is included.
Installation DrawingCartridge Only
WARNING
Maintain 5-8 Nm
(4-6 ft lbs) maximum
torque on valve tube nut.
Over tightening may cause
valve failure.
•
– – – – –
38.1
(1.50)
50.8
(2.00)
2X 7.1
(0.28)
50.8 (2.00)
44.0 (1.73)
3.4
(0.13)
58.4
(2.30)
19.1
(0.75)
15.5
(0.61)
1
2
