EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-244.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SV13-20-C/CM - Solenoid Valve
Poppet type, pilot operated solenoid valve
132 L/min (35 USgpm) • 350 bar (5000 psi)
Description
This is a 2-way, 2-position,
poppet type, high pressure,
pilot operated, normally closed
solenoid valve. This valve is
used in applications requiring
low leakage, such as load
holding applications or as a
general purpose diverter or
dump valve.
Operation
In the de-energized position the
valve blocks flow from port 2 to
1 and free flow is allowed from
port 1 to 2.
When the solenoid is energized
the pilot poppet is pulled off the
seat allowing the valve to open
in both directions.
Features
Hardened and ground working
parts. Lapped seat for low
leakage. IP69K Tough coil
compatibility. Continuously
rated. Compact design with
low pressure drop. 350 bar
working pressure.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 227 L/min (60 USgpm)
Internal leakage less than 5 drops/min, max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-20-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight cartridge only 0,62 kg (1.37 lbs)
Seal kit 889615 (Buna-N), 889619 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
Performance Data
Sectional View
A - Port 2 to port 1 energized
B - Port 1 to port 2 de-energized
Pressure Drop
Cartridge only
A
B
Pressure Drop - psi
Pressure Drop - bar
1
25
0
50
75
100
125
150
175
5
3
7
9
11
151114 22718976380
0 10 20 30 40 50 60
Flow - L/min (21,8 cSt oil @ 49°C)
Flow - USgpm (105 SUS oil @ 120°F)
2
1
1
2
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-245.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SV13-20-C/CM - Solenoid Valve
Poppet type, pilot operated solenoid valve
132 L/min (35 USgpm) • 350 bar (5000 psi)
Model Code
1
Function
SV13 - Solenoid valve
2
Size
20 - 20 size
3
Seal Material
Blank - Buna-N
V - Viton
®
4
Style
C - Normally closed
5
Manual Override Option
Blank - No manual override
M - Manual override
For valve dimensions with manual
override option installed see
page A-980.
6
Valve Housing Material
Blank - Cartridge only
S - Steel
Code Port Size Housing Number
0 Cartridge only
6G 3/4" BSPP 02-175110
8G 1" BSPP 02-175111
12T SAE 12 02-175108
16T SAE 16 02-175109
See section J for housing details.
7
Port Size
9
Connector Types
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Flying lead
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
10
Coil Series
H - 10 Series, 29 W
For coil part numbers and
dimensions see section C.
11
Special Features
00 - None
(Only required if valve has special
features, omitted if “00”.)
1 2 3 4 5 6 7 8 9 10 11
SV13 20 (V) C (M) (S) ** **** * H 00
8
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
36D - 36VDC
24A - 24VAC
115A - 115VAC
230A - 230VAC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
*Optional arc suppression diode.
Dimensions
mm (inch)
Torque cartridge in steel
housing 163-183 Nm
(120-135 ft lbs)
Note: When solenoid valve
is ordered as cartridge only, coil
nut is included.
Cartridge Only
WARNING
Maintain 5-8 Nm
(4-6 ft lbs) maximum
torque on valve tube nut.
Over tightening may cause
valve failure.
•
– – – – –
Ø 36,47 (1.436 )
47,6
(1.875) he x
1.625"– 12 Thd .
22,2 (0.875) he x
Ø 38, 9
(1.53)
29, 6
(1.16)
64,1
(2.52)
57,2
(2.25)
1
2
