EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-400.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Operation
In the de-energized position
the valve allows free flow in
both directions.
When the solenoid is ener-
gized the pilot poppet closes
the orifice and the valve closes
blocking flow from port 2 to 1
while allowing free flow from
port 1 to 2.
Features
Hardened and ground work-
ing parts. Lapped seat for low
leakage. IP69K Tough coil com-
patibility. Continuously rated.
Compact design with low
pressure drop. 350 bar work-
ing pressure.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 132 L/min (35 USgpm)
Internal leakage less than 5 drops/min max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-16-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight cartridge only 0,39 kg (0.85 lbs)
Seal kit 565810 (Buna-N), 889609 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
Sectional View
Pressure Drop
Cartridge only
SV13-16-O/OP/OS - Solenoid Valve
Poppet type normally open solenoid valve
132 L/min (35 USgpm) • 350 bar (5000 psi)
Description
This is a 2-way, 2-position,
poppet type, high pressure,
pilot operated, normally open
solenoid valve. This valve is
used in applications requir-
ing low leakage, such as load
holding applications or as a
general purpose diverter or
dump valve
A - Port 2 to port 1 de-energized
B - Port 1 to port 2
2
1
Performance Data
A
B
Pressure Drop - psi
25
0
50
75
100
125
150
175
Pressure Drop - bar
1
3
5
7
9
11
Flow - L/m in (21,8 cSt oil @ 49°C)
120100806040200
Flow - U Sgpm (105 SUS oil @ 120°F)
0 5 10 15 20 3025 35
1
2
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-401.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SV13-16-O/OP/OS - Solenoid Valve
Poppet type normally open solenoid valve
132 L/min (35 USgpm) • 350 bar (5000 psi)
Model Code
1
Function
SV13 - Solenoid valve
2
Size
16 - 16 size
3
Seal Material
Blank - Buna-N
V - Viton
®
4
Style
O - Normally open
5
Manual Override Option
Blank - No manual override
P - Push type
S - Screw type
For valve dimensions with manual
override option installed see page A-980.
6
Valve Housing Material
Blank - Cartridge only
10
Coil Series
H - 10 series, 29 W
For coil part numbers and
dimensions see section C.
11
Special Features
00 - None
(Only required if valve has special
features, omitted if “00”.)
1 2 3 4 5 6 8 9 10 11
SV13 16 (V) O (*) (S) **** * H 00
7
**
Code Port Size Housing Number
0 Cartridge only
4G 1/2" BSPP 02-175106
6G 3/4" BSPP 02-175107
10T SAE 10 02-175104
12T SAE 12 02-175105
See section J for housing details.
7
Port Size
8
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
36D - 36VDC
24A - 24VAC
115A - 115VAC
230A - 230VAC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
*Optional arc suppression diode.
9
Connector Types
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Flying lead
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
Dimensions
mm (inch)
Torque cartridge in steel housing
136-149 Nm (100-110 ft lbs)
Note: When solenoid valve
is ordered as cartridge only,
nut is included.
Installation DrawingCartridge Only
WARNING
Maintain 5-8 Nm
(4-6 ft lbs) maximum
torque on valve tube nut.
Over tightening may cause
valve failure.
•
– – – – –
64.1
(2.52)
76.2
(3.0
0)
63.5
(2.50)
12.7
(0.50)
2X 10.3
(.40)
25.4
(1.00)
25.4
(1.0
0)
2
1
88.9 (3.50)
63.5 (2.50)
