EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-370.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical Application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated Flow 114 L/min (30 USgpm)
Internal leakage less than 5 drops/min, max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-12-2 or C-12-2U
Add “U” after number if undercut is required. If undercut is not specified,
expect 10 psi@15 USgpm and 20 psi @ 30 USgpm higher pressure drop.
Fluids All general purpose hydraulics fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight including coil 0,27 kg (0.59 lbs)
Seal kit 02-165889 (Buna-N), 02-165888 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
Operation
In the de-energized position the
valve allows free flow in both
directions.
When the solenoid is energized
the pilot poppet closes the ori-
fice and the valve closes block-
ing flow from port 2 to 1 while
allowing free flow from port 1
to 2.
Features
Hardened and ground work-
ing parts. Lapped seat for
low leakage. IP69K Tough coil
compatibility. Continuously
rated. Compact design with low
pressure drop. 350 bar working
pressure.
Description
This is a 2-way, 2-position, pop-
pet type, high pressure, pilot
operated, normally open sole-
noid valve. This valve is used in
applications requiring low leak-
age, such as load holding appli-
cations or as a general purpose
diverter or dump valve.
Application Note:
This value is pilot operated and
requires a minimum flow of 1-2
L/min (0.3-0.5 USgpm) in order
to shift. For operation at very
low flow conditions contact
your Eaton representative.
SV13-12-O/OP/OS - Solenoid Valve
Poppet type, normally open solenoid valve
114 L/min (30 USgpm) • 350 bar (5000 psi)
Pressure Drop
Cartridge only
Performance
Sectional View
A - Port 1 to port 2 de-energized
B - Port 2 to port 1 de-energized
2
1
A
B
Pressure Drop - psi
0
50
100
200
150
250
Pressure D rop - bar
3
7
11
15
Flow - L/m in (21,8 cSt oil @ 49°C)
100806040200
Flow - USgpm (105 SU S oil @ 120°F)
0 5 10 15 20 25 30
1
2
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-371.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
9
Connector Types
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Flying lead
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
10
Coil Series
H - 10 series, 29 W
For coil dimensions see section C.
11
Special Features
00 - None
(Only required if valve has special
features, omitted if “00.”)
1
Function
SV13 - Solenoid valve
2
Size
12 - 12 size
3
Seal Material
Blank - Buna-N
V - Viton
®
4
Style
O - Normally open
5
Manual Override Option
Blank - No manual override
P - Push type
S - Screw type
For valve dimensions with
manual override option installed
see page A-980.
6
Valve Housing Material
Blank - Cartridge only
S - Steel
Code Port Size Housing Number
0 Cartridge only
4G 1/2" BSPP 02-175062
4GU 1/2" BSPP 02-172512
6G 3/4" BSPP 02-169665
6GU 3/4" BSPP 02-162922
10T SAE 10 02-169744
10TU SAE 10 02-169817
12T SAE 12 02-169782
12TU SAE 12 02-169790
See section J for housings.
7
Port Size
8
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
36D - 36VDC
24A - 24VAC
115A - 115VAC
230A - 230VAC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
*Optional arc suppression diode.
SV13-12-O/OP/OS - Solenoid Valve
Poppet type, normally open solenoid valve
114 L/min (30 USgpm) • 350 bar (5000 psi)
Model Code
2 3 4 5 6 101
SV13 12 (V) O (*) (S)
7
**
8
****
9
* H
11
00
Dimensions
mm (inch)
Torque cartridge in steel housing
102-115 Nm (75-85 ft lbs)
Note: When solenoid valve
is ordered as cartridge only,
coil nut is included.
Installation DrawingCartridge Only
WARNING
Maintain 5-8 Nm
(4-6 ft lbs) maximum
torque on valve tube nut.
Over tightening may cause
valve failure.
•
–
–
–
–
–
2X 10.31
(.406)
88.9
(3.50)
88.9 (3.50)
63.5 (2.50)
63.5
(2.50)
12.7
(.50)
60.3
(2.37)
12.7
(.50)
28.7
(1.13)
25.4
(1.00)
2
1
