EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-172.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SV13-10-C/CM - Solenoid Valve
Poppet type, normally closed solenoid valve, (free reverse flow)
45 L/min (12 USgpm) • 350 bar (5000 psi)
Description
This is a 2-way, 2-position,
poppet type, high pressure,
pilot operated, normally closed
solenoid valve. This valve is
used in applications requir-
ing low leakage, such as load
holding applications or as a
general purpose diverter or
dump valve.
Operation
In the de-energized position
the valve blocks flow from port
2 to 1 and free flow is allowed
from port 1 to 2.
When the solenoid is ener-
gized the pilot poppet is pulled
off the seat allowing the valve
to open in both directions.
Features
Hardened and ground work-
ing parts. Lapped seat for low
leakage. IP69K Tough coil com-
patibility. Continuously rated.
Compact design with low
pressure drop. 350 bar work-
ing pressure.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 45 L/min (12 USgpm)
Internal leakage, port 2 to port 1 5 drops/min, max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight cartridge only 0,18 kg (0.39 lbs)
Seal kit 565803 (Buna-N), 566086 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
Performance Data
Sectional View
A - Port 1 to port 2
B - Port 2 to port 1 energized
Pressure Drop
Cartridge only
A
B
Pressure Drop - psi
Pressure Drop - bar
0 2 4 6 8 10 12
0 8 15 23 30 38 45
Flow - L/min (21,8 cSt oil @ 49°C)
Flow - USgpm (105 SUS oil @ 120°F)
100
75
50
25
0
1
3
5
7
2
1
1
2
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-173.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SV13-10-C/CM - Solenoid Valve
Poppet type, normally closed solenoid valve, (free reverse flow)
45 L/min (12 USgpm) • 350 bar (5000 psi)
Model Code
1
Function
SV13 - Solenoid valve
2
Size
10 - 10 size
3
Seal Material
Blank - Buna-N
V - Viton
®
4
Style
C - Normally closed
5
Manual Override Option
Blank - No manual override
M - Manual override
For valve dimensions with manual
override option installed see
page A-980.
6
Valve Housing Material
Blank - Cartridge only
S - Steel
Code Port Size Housing Number
0 Cartridge only
2G 1/4" BSPP 02-175102
3G 3/8" BSPP 02-175103
6T SAE 6 02-175100
8T SAE 8 02-175101
See section J for housing details.
7
Port Size
9
Connector Types
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Flying lead
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
10
Coil Series
H - 10 Series, 29 W
For coil part numbers and
dimensions see section C.
11
Special Features
00 - None
(Only required if valve has special
features, omitted if “00”.)
1 2 3 4 5 6 7 8 9 10 11
SV13 10 (V) C (M) (S) ** **** * H 00
8
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
36D - 36VDC
24A - 24VAC
115A - 115VAC
230A - 230VAC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
*Optional arc suppression diode.
Dimensions
mm (inch)
Torque cartridge in steel
housing 68-75 Nm
(50-55 ft lbs)
Note: When solenoid valve
is ordered as cartridge only, coil
nut is included.
Cartridge Only
WARNING
Maintain 5-8 Nm
(4-6 ft lbs) maximum
torque on valve tube nut.
Over tightening may cause
valve failure.
•
– – – – –
22,2 (0.875) hex
0.875"– 14 Thd.
25,4
(1.00) hex
Ø 15,82 (0.623 )
Ø 38, 9
(1.53)
29, 6
(1.16)
31, 7
(1.25)
57,8
(2.28)
1
2
