EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-800.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SV12A/B-12-4 - Solenoid Valve
4-way, 2-position, spool type solenoid valve
Up to 42 L/min (11 USgpm) • 350 bar (5000 psi)
Operation
In the de-energized position all
ports are blocked.
In the energized position flow
is allowed between port 3 to
port 4 and between port 2 to
port 1 in both directions.
Features
Hardened, ground and honed
working parts to limit leakage.
IP69K Tough coil compatibility.
Continuously rated. Compact
design with low pressure drop.
Rated pressure on all ports.
Working pressure 350 bar.
Performance
Sectional View
Description
This is a 4-way 2-position,
direct acting, high pressure,
spool type solenoid valve. This
valve can be used in applica-
tions where a double acting
actuator needs to be isolated.
Pressure
Drop
Cartridge only
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49°C (120°F)
Typical application pressure (all ports except port 1) 350 bar (5000 psi)
Typical application pressure at port 1 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow SV12A-12-4 34 L/min (9 USgpm)
SV12B-12-4 42 L/min (11 USgpm)
Internal leakage 350 cc/min (21.5 in3/min) @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuos from 85% to 110% of nominal voltage
Cavity C-12-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Steel
Weight including coil SV12A-12-4 0.68 kg (1.5 lbs)
SV12B-12-4 0.86 kg (1.9 lbs)
Seal kit 2160979 Buna-N), 2160980 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
A - Port 2 to port 1
B - Port 1 to port 4
0
20
40
60
80
100
0 1 2 3 4 5 6 7 8 9 10 11
A
B
Pressure Drop - psi
Pressure Drop - bar
Flow - L/min
Flow - USgpm
5 10 15 20 25
30
4035
5
4
6
3
2
1
1
3
2
4
3
2
1
4
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-801.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
51.6
(2.03)
31.8
(1.25)
2 Slots
8.75
(0.344)
68.28
(02.688)
88.9
(03.50)
10.3
(0.41)
127
(05.00)
28.7
(1.13)
31.8
(1.25)
63.5
(2.500)
84.9
(3.34)
1
4
2
26.7
(1.05)
101.6
(04.00)
74.4
(2.93)
3
1
2
3
4
90,9 (3.58)
Ø 22,1 (.872)
84,9 (3.34)
1.25”
HEX
Torque
22-26 LB-IN
Torque
22-26 LB-IN
MANUAL
OVERDRIVE
MANUAL
OVERDRIVE
43,5 (1.71)
45,9 (1.81)
1.25”
HEX
85,4 (3.36)
50,3
(1.98)
48,7
(1.92)
1.062” -
12 Thread
1.062” -
12 Thread
SV2A-12-4 SV2B-12-4
Ø 20,6 (.810)
Ø 23,8 (.935)
SV12A/B-12-4 - Solenoid Valve
4-way, 2-position, spool type solenoid valve
Up to 42 L/min (11 USgpm) • 350 bar (5000 psi)
Model Code
1 2 3 4 9 10
SV12 * 12 *
5
4P
7
**** * **
11
**
9
Coil Types
Blank - No coil
L - L series (30W EN 490)
used for SV12A-12
R - R series (30W) used
for SV12B-12
10
Coil Special Features
Blank - No coil
00 - No special feature
11
Special Features
00 - None
(Only required if valve has special
features omitted if "00".)
1
Function
SV12 - Solenoid valve
2
Max Flow
A - 34 L/min (9USgpm)
B - 42 L/min (11USgpm)
3
Size
12 - 12 size
4
Seal Material
Blank - Buna-N
V - Viton
®
5
Style
4P - 4-way, push type
manual override
7
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
*Optional arc suppression diode.
8
Connector Types
Blank - No coil
G - ISO 4400 DIN 43650
W - Flying lead (DC only)
C - Deutch on Leads
H - Metripak 150 on Leads
F - Weatherpak Male on Leads
For coil part numbers and dimensions
see section C.
6
Port Size
Code Port Size Housing Number
Aluminium Steel
0 Cartridge only
A6G 3/4” BSPP 5986432-001
A10H SAE 10 5986434-001
A12H SAE 12 5986436-001
S6G 3/4” BSPP 5991073-001
S10T SAE 10 5991074-001
S12T SAE 12 5991075-001
6
****
8
*
Dimensions
mm (inch)
Torque cartridge in steel hous-
ing 102-115 Nm (75-85 ft. lbs)
Note: When solenoid vale is
ordered as cartridge only,
coil nut is included.
Installation Drawing (Steel)Cartridge Only
WARNING
Maintain 2.5-3 Nm
(1.8-2.2 ft lbs)
maximum torque on valve
tube nut. Over tightening
may cause valve failure.
•
WARNING
Aluminum housings
can be used for pres-
sures up to 210 bar (3000 psi).
Steel housings must be used
for operating pressures above
210 bar (3000 psi).
•
– – – – –
SV12A-12-4 SV12B-12-4
