EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-600.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SV11A/B-12-3 - Solenoid Valve
3-way, 2-position spool type solenoid valve
Up to 42 L/min (11 USgpm) • 350 bar (5000 psi)
Description
This is a 3-way 2-position, high
pressure, direct acting, spool
type solenoid valve. This valve
can be used in applications
requiring separate pressure
and tank lines, such as a single
acting cylinder or any other
application where a three way
two position solenoid valve is
needed.
Operation
In the de-energized position
this valve allows flow from
port 1 to 2 while port 3 is
blocked.
In the energized position flow
is allowed from port 3 to port
1 while port 2 is blocked.
Features
Hardened, ground and honed
working parts to limit leakage.
IP69K Tough coil compatibility.
Continuously rated. Compact
design with low pressure drop.
Rated pressure on all ports.
Working pressure 350 bar.
Pressure Drop
Cartridge only
Performance
Sectional View
A - Port 3 to port 1 energized
B - Port 1 to port 2 de-energized
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49°C (120°F)
Typical application pressure (all ports except port 1) 350 bar (5000 psi)
Typical application pressure at port 1 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 350 bar (5000 psi)
Rated flow SV11A-12-3 38 L/min (10 USgpm)
Max. flow port 1 to port 2 - 27 L/min (7 USgpm)
SV11B-12-3 42 L/min (11 USgpm)
Max. flow port 1 to port 2 - 34 L/min (9 USgpm)
Internal leakage 350 cc/min (21.5 in3/min) @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuos from 85% to 110% of nominal voltage
Cavity C-12-3
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Standard housing materials Steel
Weight including coil SV11A-12-3 0.68 kg (1.5 lbs)
SV11B-12-3 0.86 kg (1.9 lbs)
Seal kit 9900171-000 Buna-N), 9900172-000 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
Flow - L/min
0
20
40
60
80
100
120
140
0 1 2 3 4 5 6 7 8 9 10
5 10 15 20 25 30 35
Flow - USgpm
Pressure Drop - bar
Pressure Drop - psi
B
A
7
5
4
6
8
9
3
2
1
2
1
3
3
2
1
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-601.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
1
Function
SV11 - Solenoid valve
2
Max Flow
A - 38 L/min (10 USgpm)
B - 42 L/min (11 USgpm)
3
Size
12 - 12 size
4
Seal Material
Blank - Buna-N
V - Viton
®
5
Style
3P - 3 way, push type
manual override
CODE PORT SIZE HOUSING NUMBER
Aluminium Steel
A6G 3/4” BSPP 02-161816
A12H SAE 12 02-160646
S4G 1/2” BSPP 02-169815
S6G 3/4” BSPP 02-169814
S10T SAE 10 02-161070
S12T SAE 12 02-169816
6
Port Size
0 - Cartridge only
7
Voltage rating
00 - No coil
12D - 12VDC
24D - 24VDC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
8
Connector types
Blank - No coil
G - ISO 4400 DIN 43650
W - Flying lead (DC only)
C - Deutch on Leads
H - Metripak 150 on Leads
F - Weatherpak Male on Leads
For coil dimensions see section C.
9
Coil types
Blank - No coil
L - L series (30W EN 490)
used for SV1A-12
R - R series (30W) used
for SV1B-12
10
Coil special features
Blank - No coil
00 - No special feature
11
Special features
00 - None
(Only required if valve has special
features, omitted if "00".)
SF - Soft shift
SV11A/B-12-3 - Solenoid Valve
3-way, 2-position spool type solenoid valve
Up to 42 L/min (11 USgpm) • 350 bar (5000 psi)
Model Code
1 2 3 4 5 8 10
SV11 * 12 * 3P
7
**** * **
11
**
6
****
9
*
Dimensions
mm (inch)
Torque cartridge in aluminum
housing 81-95 Nm (60-70 ft. lbs)
Torque cartridge in steel hous-
ing 102-115 Nm (75-85 ft. lbs)
Note: When solenoid vale is
ordered as cartridge only,
coil nut is included.
– – – – –
Installation Drawing (Steel)
Cartridge Only
3
2
1
23,8
(.94)
22,2
(.87)
67,8 (2.67)
84,9 (3.34)
1.25”
HEX
Torque
22-26 LB-IN
Torque
22-26 LB-IN
MANUAL
OVERDRIVE
MANUAL
OVERDRIVE
43,5 (1.71)
45,9 (1.81)
1.25”
HEX
85,4 (3.36)
50,3
(1.98)
48,7
(1.92)
1.062” -
12 Thread
SV1A-12-3 SV1B-12-3
SV11A-12-3 SV11B-12-3
WARNING
Maintain 2.5-3 Nm
(1.8-2.2 ft lbs)
maximum torque on valve
tube nut. Over tightening may
cause valve failure.
•
WARNING
Aluminum housings
can be used for pres-
sures up to 210 bar (3000 psi).
Steel housings must be used
for operating pressures above
210 bar (3000 psi).
•
108
(4.25)
82.55
(3.250)
88.9
(3.50)
51.6
(2.03)
25.4
(1.00)
84.9
(3.34)
3
76.2
(3.50)
1
2
28.7
(1.13)
25.4
(1.00)
