EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-560.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical Application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated Flow 23L/min (6 USgpm)
Internal leakage, port 2 to port 1 164 cm
3
/min (10 in
3
/min) max at 350 bar (5000 psi)
Temperature range -40° to 100° C (-40° to 212° F)
Coil Duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-3
Fluids All general purpose hydraulics fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight cartridge only 0,19 kg (0.42 lbs)
Seal kit 889624 (Buna-N) 889688 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
Description
This is a 3-way 2-position, high
pressure, direct acting, spool
type solenoid valve. This valve
can be used in applications
requiring separate pressure
and tank lines, such as a single
acting cylinder or any other
application where a three way
two position solenoid valve is
needed.
Operation
In the de-energized position
this valve allows flow from
port 2 to 1 while port 3 is
blocked.
In the energized position flow
is allowed from port 1 to port
3 while port 2 is blocked.
Features
Hardened, ground and honed
working parts to limit leakage.
IP69K Tough coil compatibility.
Continuously rated. Compact
design with low pressure drop.
Rated pressure on all ports.
Working pressure 350 bar.
Performance DataSectional View
SV11-10-3/3M - Solenoid Valve
3-way, 2-position, spool type solenoid valve
Up to 23 L/min (6 USgpm) • 350 bar (5000 psi)
Pressure Drop
Cartridge only
A - Port 3 to port 1
B - Port 1 to port 2
A - Normally open, normally closed
B - Selector 1 to 2
3
2
Flow - L/m in (21,8 cSt oil @ 49°C)
A
B
0 8 15 23
175
125
75
25
11
9
7
5
3
1
Flow - USgpm (105 SUS oil @ 120°F)
0 2 4 6
0 1 2 3 4 5 6
0 4
8
11 15 18 23
Flow - L/m in (21,8 cSt oil @ 49°C)
A
B
Flow - USgpm (105 SUS oil @ 120°F)
70
140
210
280
350
1000
2000
3000
4000
5000
Operating LimitsPressure Drop vs. Flow
2
1
3