EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-150.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Pressure Drop
Cartridge only
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 45 L/min (12 USgpm)
Internal leakage, port 2 to port 1 5 drops/min, max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight cartridge only 0,18 kg (0.39 lbs)
Seal kit 565803 (Buna-N), 566086 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
SV11-10-C/CM - Solenoid Valve
Poppet type, normally closed solenoid valve
45 L/min (12 USgpm) • 350 bar (5000 psi)
Description
This is a 2-way, 2-position,
poppet type, high pressure,
pilot operated, normally closed
solenoid valve. This valve is
used in applications requir-
ing low leakage, such as load
holding applications or as a
general purpose diverter or
dump valve.
Operation
In the de-energized position the
valve blocks flow from port 2 to
1 and free flow is allowed from
port 1 to 2.
When the solenoid is energized
the pilot poppet is pulled off the
seat allowing the valve to open
from port 2 to 1. in the reverse
direction the flow is restricted
by the pilot orifice.
Features
Hardened and ground work-
ing parts. Lapped seat for low
leakage. IP69K Tough coil com-
patibility. Continuously rated.
Compact design with low
pressure drop. 350 bar work-
ing pressure.
Performance Data
Sectional View
A - Port 1 to port 2 de-energized
B - Port 2 to port 1 energized
2
1
Pressure Drop - psi
225
25
50
75
100
125
150
175
200
Flow - U Sgpm (195 SSU oil @ 120°F)
0 2 4 6 8 10 12 14 16 18 20
Flow - L/m in (21,8 cSt oil @ 49°C)
0 7.6 15.1 22.7 30.3 37.9 45.4 53.0 60.6 68.1 75.7
Pressure D rop - bar
3.4
1.7
5.2
10.3
8.6
6.9
12.1
13.8
15.5
Port 1 to 2
Port 2 to 1
1
2
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-151.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SV11-10-C/CM - Solenoid Valve
Poppet type, normally closed solenoid valve
45 L/min (12 USgpm) • 350 bar (5000 psi)
SV11 10 (V) C (M) (S) * H 00
Model Code
1 2 3 4 5 6 9 108
****
7
**
11
9
Connector Types
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Flying lead
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
10
Coil Series
H - 10 series, 29 W
For coil part numbers and dimensions
see section C.
11
Special Features
00 - None
(Only required if valve has special
features omitted if "00".)
1
Function
SV11 - Solenoid valve
2
Size
10 - 10 size
3
Seal Material
Blank - Buna-N
V - Viton
®
4
Style
C - Normally closed
5
Manual Override Option
Blank - No manual override
M - Manual override
For valve dimensions with manual over-
ride option installed see page A-980.
6
Valve Housing Material
Blank - Cartridge only
S - Steel
7
Port Size
8
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
36D - 36VDC
24A - 24VAC
115A - 115VAC
230A - 230VAC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
*Optional arc suppression diode.
Dimensions
mm (inch)
Torque cartridge in steel housing
68-75 Nm (50-55 ft. lbs)
Note: When solenoid valve is
ordered as cartridge only, coil
nut is included.
Code Port Size Housing Number
0 Cartridge only
2G 1/4" BSPP 02-175102
3G 3/8" BSPP 02-175103
6T SAE 6 02-175100
8T SAE 8 02-175101
See section J for housing details.
Installation Drawings (Steel)
Cartridge Only
WARNING
Maintain 5-8 Nm
(4-6 ft lbs) maximum
torque on valve tube nut.
Over tightening may cause
valve failure.
•
– – – – –
50.8
(2.00)
63.5
(2.50)
19.0
(0.75)
22.2
(0.87)
63.5
(2.50)
44.45±0.12
(1.750±.005)
2
1
57.1
(2.25)
44.45±0.25
(1.750±.010)
2xØ7.14±0.12
(0.281±.005)
9.5
(0.37)
