EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-710.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage, port 2 to port 1 82 cm
3
/min. (5 in
3
/min) max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight cartridge only 0,21 kg (0.46 lbs)
Seal kit 889625 (Buna-N), 566080 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
SV11-10-4/4M - Solenoid Valve
4-way, 2-position, spool type solenoid valve
23 L/min (6 USgpm) • 350 bar (5000 psi)
Operation
In the de-energized position
this valve allows flow from
port 4 to port 1 and from port
3 to port 2.
In the energized position flow
is allowed from port 3 to port
4 and from port 2 to port 1.
Features
Hardened, ground and honed
working parts to limit leakage.
IP69K Tough coil compatibility.
Continuously rated. Compact
design with low pressure drop.
Rated pressure on all ports.
Working pressure 350 bar.
Pressure
Drop
Cartridge only
Performance
Sectional View
Description
This is a 4-way 2-position, high
pressure, direct acting, spool
type solenoid valve. This valve
can be used in applications
where the motion of a double
acting cylinder or a motor
needs to be reversed.
A - Port 3 to port 2
B - Port 4 to port 1
3
2
1
4
150
125
100
75
50
25
0
Pressure D rop - psi
9
7
5
3
1
Pressure D rop - bar
A
B
231580
Flow - L/m in (21,8 cSt oil @ 49°C)
0 2 4 6
Flow - U Sgpm (105 SU S oil @ 120°F)
3
1
4
2
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-711.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SV11-10-4/4M - Solenoid Valve
4-way, 2-position, spool type solenoid valve
23 L/min (6 USgpm) • 350 bar (5000 psi)
Model Code
1 2 3 4 9 10
SV11 10 (V) 4
5
(M)
8
**** * H
11
00
10
Coil Series
H - 10 series, 29W
For coil part numbers and dimensions
see section C.
11
Special Features
00 - None
(Only required if valve has special
features omitted if "00".)
1
Function
SV11 - Solenoid valve
2
Size
10 - 10 size
3
Seal Material
Blank - Buna-N
V - Viton
®
4
Style
4 - 4-way, 2-position
5
Manual Override Option
Blank - No manual override
M - Manual override
For valve dimensions with manual over-
ride option installed see page A-980.
6
Valve Housing Material
Blank - Omit for cartridge only
S - Steel
8
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
36D - 36VDC
24A - 24VAC
115A - 115VAC
230A - 230VAC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
*Optional arc suppression diode.
9
Coil Types
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Flying lead
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
For coil part numbers and dimensions
see section C.
7
Port Size
Code Port Size Housing Number
0 Cartridge only
2G 1/4" BSPP 02-175139
3G 3/8" BSPP 02-175140
6T SAE 6 02-175137
8T SAE 8 02-175138
See section J for housing details.
7
**
6
(S)
Dimensions
mm (inch)
Torque cartridge in steel
housing 68-75 Nm (50-55 ft lbs)
Note: When solenoid valve
is ordered as cartridge only,
coil nut is included.
Installation DrawingCartridge Only
WARNING
Maintain 5-8 Nm
(4-6 ft lbs)
maximum torque on valve
tube nut. Over tightening
may cause valve failure.
•
– – – – –
76.2
(3.00)
57.8
(2.28)
88.9
(3.50)
34.9
(1.37)
22.2
(0.87)
57.15
(2.250)
76.2
(3.00)
9.5
(0.38)
7.14
(0.281)
2-Slots
50.8
(2.00)
19.1
(0.75)
1
4
2
3
22.2
(0.87)