EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-480.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SV11-8-3/3M - Solenoid Valve
3-way, 2-position spool type solenoid valve
11 L/min (3 USgpm) • 350 bar (5000 psi)
Description
This is a 3-way 2-position, high
pressure, direct acting, spool
type solenoid valve. This valve
can be used in applications
requiring separate pressure
and tank lines, such as a single
acting cylinder or any other
application where a three way
two position solenoid valve is
needed.
Operation
In the de-energized position
this valve allows flow from
port 2 to 1 while port 3 is
blocked.
In the energized position flow
is allowed from port 1 to port
3 while port 2 is blocked.
Features
Hardened, ground and honed
working parts to limit leakage.
IP69K Tough coil compatibility.
Continuously rated. Compact
design with low pressure drop.
Rated pressure on all ports.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 11 L/min (3 USgpm)
Internal leakage, combined port 2 and port 1 140 cm3/min (8.5 in3/min) max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-8-3
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Steel
Weight cartridge only 0,13 kg (0.28 lbs)
Seal kit 02-160755 (Buna-N), 02-160756 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
Performance DataSectional View
Pressure
Drop
Operating Limits
A - Normally open & closed
B - Selector 1 to 2 and 1 to 3
Pressure Drop vs. Flow
A - Port 1 to 2 and 1 to 3
B - Port 3 to 1
C - Port 2 to 1
3
2
1
Pressure Drop - psi
25
50
75
100
125
0
A
Pressure D rop - bar
2
4
6
8
0
B
C
2 40 6 8 10
Flow - L/m in (21,8 cSt oil @ 49°C)
0 0.5 1.5 2.0 2.5 3.01.0
Flow - U Sgpm (105 SU S oil @ 120°F)
5000
4000
3000
2000
1000
0
Pressure - psi
70
140
210
0
280
350
Pressure - bar
A
B
2 40 6 8 10
Flow - L/m in (21,8 cSt oil @ 49°C)
0 0.5 1.5 2.0 2.5 3.0 3.51.0
Flow - U Sgpm (105 SU S oil @ 120°F)
2
1
3
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-481.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SV11-8-3/3M - Solenoid Valve
3-way, 2-position spool type solenoid valve
11 L/min (3 USgpm) • 350 bar (5000 psi)
Model Code
1
Function
SV11 - Solenoid valve
2
Size
8 - 8 size
3
Seal Material
Blank - Buna-N
V - Viton
®
4
Style
3 - 3-way, 2 position
5
Manual Override Option
Blank - No manual override
M - Manual override
For valve dimensions with manual
override option installed see page A-980.
6
Valve Housing Material
Blank - Cartridge only
9
Connector Types
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Flying lead
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
10
Coil Series
P - 8 series, 23 W
For coil part numbers and
dimensions see section C.
11
Special Features
00 - None
(Only required if valve has special
features, omitted if “00”.)
1 2 3 4 6 8 9 10 11
SV11 8 (V) 3
5
(M) (S) **** * P 00
7
**
Code Port Size Housing Number
0 Cartridge only
2G 1/4" BSPP 02-160743
3G 3/8" BSPP 02-160744
4T SAE 4 02-160745
6T SAE 6 02-160746
See section J for housing details.
7
Port Size
8
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
36D - 36VDC
24A - 24VAC
115A - 115VAC
230A - 230VAC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
*Optional arc suppression diode.
Dimensions
mm (inch)
Torque cartridge in steel or
aluminum housing 34-41 Nm
(25-30 ft lbs)
Note: When solenoid valve
is ordered as cartridge only,
nut is included.
Installation DrawingCartridge Only
WARNING
Maintain 5-8 Nm
(4-6 ft lbs) maximum
torque on valve tube nut.
Over tightening may cause
valve failure.
•
– – – – –
19.1
(0.75)
29.8
(1.17)
2x7.14
(0.281)
56.74
(2.23 )
3.4
(0.13)
66.7
(2.63)
15.5
(0.61)
19.1
(0.75)
58.4
(2.30)
3
54
(2.12)
63.5
(2.50)
1
2
