EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-870.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SV9-8-E - Solenoid Valve
4-way, 3-position, screw-in cartridge, solenoid valve
Up to 13 L/min (3.5 USgpm) • Up to 210 bar (3000 psi)
Description
This is a 4 way 3 position,
direct acting, spool type sole-
noid valve. All ports closed in
the de-energized position. This
valve is ideal for small flow
applications where an actuator
needs to be moved in both
directions and stopped in any
position.
Operation
In the de-energized (cen-
ter) position, all ports are
blocked. When solenoid A is
energized, flow is directed
from port 3 to port 4 and from
port 2 to port 1.
When solenoid B is energized,
flow is directed from port 3
to port 2 and from port 4 to
port 1.
Features
Hardened, ground and honed
working parts to limit leakage.
IP69K Tough coil compatibility.
Continuously rated. Compact
design with low pressure drop.
Rated pressure on all ports.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Fatigue pressure 3,000 psi per NFPA/T2-6-1 R2-2000
Rated burst pressure 11,000 psi per NFPA/T2-6-1 R2-2000
Max flow 13.2 L/min (3.5 USgpm)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Coil power 23W
Cavity C-8-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard housing material Aluminum
Weight including coil (1.2 lbs)
Seal kit 02-160757 (Buna-N), 02-160758 (Viton
®
)
Internal leakage 164 cm
3
/min (10 in
3
/min) max. @ 210 bar (3000 psi)
Viton is a registered trademark of E.I. DuPont
*AC coils must be used with a rectifying connector
Endurance tested to 1 million cycles at full rated flow and pressure.
Performance DataSectional View
Pressure
A - Port 3 to port 2 or port 4
B - Port 2 to port 4 or port 1
0
25
50
75
125
150
1.00 1.50.5 2.0 2.5 3.0 3.5
4 8 11
3
7
10
100
A
B
Pressure Drop - psi
Pressure Drop - bar
Flow - L/min (21,8 cSt oil @ 49°C)
Flow - USgpm (105 SUS oil @ 120°F)
1
3
2
4
“Coil B”
“Coil A”
3(P)
2(A)
1(T)
4(B)
B A
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-871.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SV9-8-F - Solenoid Valve
4-way, 3-position, screw-in cartridge, solenoid valve
Up to 13 L/min (3.5 USgpm) • Up to 210 bar (3000 psi)
Description
This is a 4 way 3 position,
direct acting, spool type
solenoid valve. In the de-
energized condition Port 2
and 4 are open to tank with
the inlet port 3 blocked. This
valve is ideal for small flow
applications where an actuator
needs to be moved in both
directions and stopped in any
position while allowing the
service ports to decay to tank
pressure in the de-energized
condition.
Operation
In the de-energized (center) position,
port 1, port 2,
and port 4 are open to
each other while port 3 is blocked.
When solenoid A is energized, flow is
directed from port 3 to port 4 and
from port 2 to port 1. When solenoid
B is energized, flow is directed from
port 3 to port 2 and from port 4 to
port 1.
Features
Hardened, ground and honed
working parts to limit leakage.
IP69K Tough coil compatibility.
Continuously rated. Compact
design with low pressure drop.
Rated pressure on all ports.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Fatigue pressure 3,000 psi per NFPA/T2-6-1 R2-2000
Rated burst pressure 11,000 psi per NFPA/T2-6-1 R2-2000
Max flow 13.2 L/min (3.5 USgpm)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Coil power 23W
Cavity C-8-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Standard Housing material Aluminum
Weight including coil (1.2 lbs)
Seal kit 02-160757 (Buna-N), 02-160758 (Viton
®
)
Internal leakage 164 cm
3
/min (10 in
3
/min) max. @ 210 bar (3000 psi)
Viton is a registered trademark of E.I. DuPont
Endurance tested to 1 million cycles at full rated flow and pressure.
Performance Data
Sectional View
Pressure
A - Port 4 or port 1 de-energized
B - Port 3 to port 2 or port 4 to port 1
C - Port 2 or port 1 de-energized
D - Port 2 or 1
0
25
50
75
125
150
1.00 1.50.5 2.0 2.5 3.0 3.5
4 8 11
3
7
10
100
A
C
B
D
Pressure Drop - psi
Pressure Drop - bar
Flow - L/min (21,8 cSt oil @ 49°C)
Flow - USgpm (105 SUS oil @ 120°F)
1
3
2
4
“Coil B”
“Coil A”
3(P)
2(A)
1(T)
4(B)
B A
