EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-322.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SV5-10-O/OP/OS - Solenoid Valve
Poppet type, normally open solenoid valve
45 L/min (12 USgpm) • 210 bar (3000 psi)
Description
This is a 2-way, 2-position,
poppet type, pilot operated,
normally open solenoid valve.
This valve is used in applica-
tions requiring low leakage,
such as load holding applica-
tions or as a general purpose
diverter or dump valve.
Operation
In the de-energized position
the valve allows free flow from
port 2 to 1 and a restricted
flow through the pilot orifice
from port 1 to 2.
When the solenoid is ener-
gized the pilot poppet closes
the orifice and the valve closes
blocking flow from port 2 to 1
while allowing free flow from
port 1 to 2.
Features
Hardened and ground work-
ing parts. Lapped seat for low
leakage. IP69K Tough coil com-
patibility. Continuously rated.
Compact design with low
pressure drop.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 45 L/min (12 USgpm)
Internal leakage, port 2 to port 1 Less than 5 drops/min max @ 210 bar ( 3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,4 kg (0.087 lbs)
Seal kit 565806 (Buna-N), 566086 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
Performance Data
Sectional View
Pressure Drop
Cartridge only
Port 2 to port 1 de-energized
6
5
2
4
3
0
302015105 35 40 45
50
75
10 0
25
25
1
7
2 4 6 8 10 12
Pressure D rop - p si
Pres s ure Drop - bar
0
0
Fl ow - L/min (21,8 cSt oil @ 49°C )
Flow - USgpm ( 105 SUS oil @ 1 20°F )
1
2
2
1
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-323.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SV5-10-O/OP/OS - Solenoid Valve
Poppet type, normally open solenoid valve
45 L/min (12 USgpm) • 210 bar (3000 psi)
Model Code
1
Function
SV5 - Solenoid valve
2
Size
10 - 10 size
3
Seal Material
Blank - Buna-N
V - Viton
®
4
Style
O - Normally open
5
Manual Override Option
Blank - No manual override
P - Push type
S - Screw type
For valve dimensions with manual
override option installed see page A-980.
6
Filter Option
Blank - None
F - Filter screen
Code Port Size Housing Number
0 Cartridge only
3B 3/8" BSPP 02-175464*
6T SAE 6 566151*
2G 1/4" BSPP 876702
3G 3/8" BSPP 876703
6H SAE 6 876700
8H SAE 8 876701
*Light duty housing.
See section J for housing details.
7
Port Size
9
Connector Types
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Flying lead
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
For coil part numbers and
dimensions see section C.
10
Special Features
00 - None
(Only required if valve has special
features, omitted if “00”.)
Note: Use J series, 23 W coils
with this solenoid valve.
1 2 3 4
SV5 10 (V) O
5
(*)
7
**
8
****
9
*
10
00
8
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
36D - 36VDC
24A - 24VAC
115A - 115VAC
230A - 230VAC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
*Optional arc suppression diode.
6
(F)
Dimensions
mm (inch)
Torque cartridge in aluminum
housing 47-54 Nm (35-40 ft lbs)
Note: When solenoid valve
is ordered as cartridge only,
coil nut is included.
Cartridge Only
WARNING
Maintain 5-8 Nm
(4-6 ft lbs) maximum
torque on valve tube nut.
Over tightening may cause
valve failure.
•
– – – – –
1
Ø 15,80 (0.622 )
0.875" – 14 Thd.
25,4 (1.00) hex
19,0 (0.75) hex
2
70, 0
(2.76)
31, 7
(1.25)
Ø 38, 9
(1.53)
29, 6
(1.16)
