EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-100.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage less than 5 drops/min @ 210 bar (3000 psi)
Coil duty Continuous from 85% to 110% of nominal voltage
Response times (100% rated voltage and flow) Energize: 18 ms
De-Energize: 46 ms
Temperature range -40° to 120°C (-40° to 248°F)
Cavity C-8-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,28 kg (0.62 lbs)
Seal kit 02-165875 (Buna-N), 02-165877 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
SV5-8-C/CM - Solenoid Valve
Poppet type, normally closed solenoid valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
Description
This is a 2-way, 2-position,
poppet type, pilot operated,
normally closed solenoid
valve. This valve is used in
applications requiring low
leakage, such as load holding
applications or as a general
purpose diverter or dump
valve.
Operation
In the de-energized position
the valve blocks flow from port
2 to 1 and free flow is allowed
from port 1 to 2.
When the solenoid is ener-
gized the pilot poppet is pulled
off the seat allowing the valve
to open from port 2 to 1. in the
reverse direction the flow is
restricted by the pilot orifice.
Features
Hardened and ground work-
ing parts. Lapped seat for low
leakage. IP69K Tough coil com-
patibility. Continuously rated.
Compact design with low
pressure drop.
Pressure Drop
Cartridge only
Performance Data
Sectional View
A - Port 1 to port 2 de-energized
B - Port 2 to port 1 energized
2
1
50
100
150
200
1 2 3 4 5 6
0
4
8
12
4 8 12 16 20
0
Pressure Drop - psi
Pressure D rop - bar
A
B
0
Flow - L/m in (21,8 cSt oil @ 49°C)
Flow - U Sgpm (105 SUS oil @ 120°F)
1
2
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-101.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
10
Connector Types
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Flying lead
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
11
Coil Series
S - 8 series, 20 W
For coil part numbers and dimensions
see section C.
12
Special Features
00 - None
(Only required if valve has special
features, omitted if “00”.)
SV5-8-C/CM - Solenoid Valve
Poppet type, normally closed solenoid valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
Model Code
1
Function
SV5 - Solenoid valve
2
Size
8 - 8 size
3
Seal Material
Blank - Buna-N
V - Viton
®
4
Style
C - Normally closed
5
Manual Override Option
Blank - No manual override
M - Knob type
For valve dimensions with manual
override option installed see page A-980.
6
Filter Option
Blank - None
F - Filter screen
7
Valve Housing Material
Omit for cartridge only
A - Aluminum
1 2 3 4 5 6 7 10 11
SV5 8 (V) C (M) (F) (A)
9
****
8
** * S
12
00
Code Port Size Housing Number
0 Cartridge only
2G 1/4" BSPP 02-160727
3G 3/8" BSPP 02-160728
4T SAE 4 02-160730
6T SAE 6 02-160731
8T SAE 8 02-160732
See section J for housing details.
8
Port Size
9
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
36D - 36VDC
24A - 24VAC
115A - 115VAC
230A - 230VAC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
*Optional arc suppression diode.
Dimensions
mm (inch)
Torque cartridge in aluminum
housing 34-41 Nm (25-30 ft lbs)
Note: When solenoid valve is
ordered as cartridge only, coil
nut is included.
Installation DrawingCartridge Only
WARNING
Maintain 5-8 Nm
(4-6 ft lbs) maximum
torque on valve tube nut.
Over tightening may cause
valve failure.
•
– – – –– –
1
2
58.4
(2.30)
38.1
(1.50)
50.8
(2.00)
19.1
(0.75)
15.5
(0.61)
2X 7.1
(0.28)
50.8 (2.00)
44.0 (1.73)
3.4
(0.13)
