EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-270.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SV4-10-C/CM/CR - Solenoid Valve
Spool type, normally closed solenoid valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
Description
This is a 2-way, 2-position,
spool type, direct acting,
normally closed solenoid
valve. This valve is used in
applications where the flow
needs to be blocked in both
directions when the solenoid
is de-energized.
Operation
In the de-energized position
the valve blocks flow in both
directions.
When the solenoid is ener-
gized the spool moves allow-
ing the valve to open in both
directions.
Features
Hardened, ground and honed
working parts to limit leakage.
IP69 Tough coil compatibility.
Continuously rated. Compact
design with low pressure drop.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage 82 cm
3
/min (5 in
3
/min) max @ 210 bar ( 3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,4 kg (0.087 lbs)
Seal kit 565806 (Buna-N), 889627 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
Performance Data
Sectional View
Pressure Drop
Cartridge only
Pressure Drop vs. Flow
Port 1 to port 2 or
port 2 to port 1 energized
Operating Limits
A - Port 2 to port 1
B - Port 1 to port 2
2
1
1
3
5
7
0
25
50
75
100
Pressure D rop - psi
Pressure D rop - bar
20151050
Flow - L/m in (21,8 cSt oil @ 49C)
2 4 60
Flow - U Sgpm (105 SU S oil @ 120F)
3000
2500
2000
1500
1000
500
0
Pressure (psi)
210
175
140
105
70
35
Pressure (bar)
Flow (L/m in)
A
B
4 8 12 16 20
Flow (U Sgpm )
1 2 3 4 5 6
2
1
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-271.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SV4-10-C/CM/CR - Solenoid Valve
Spool type, normally closed solenoid valve
23 L/min (6 USgpm) • 210 bar (3000 psi)
Model Code
1
Function
SV4 - Solenoid valve
2
Size
10 - 10 size
3
Seal Material
Blank - Buna-N
V - Viton
®
4
Style
C - Normally closed
5
Manual Override Option
Blank - No manual override
M - Knob type
R - Cable type
For valve dimensions with manual
override option installed see page A-980.
6
Filter Option
Blank - None
F - Filter screen
Code Port Size Housing Number
0 Cartridge only
3B 3/8" BSPP 02-175464*
6T SAE 6 566151*
2G 1/4" BSPP 876702
3G 3/8" BSPP 876703
6H SAE 6 876700
8H SAE 8 876701
*Light duty housing.
See section J for housing details.
7
Port Size
9
Connector Types
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Flying lead
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
For coil part numbers and
dimensions see section C.
10
Special Features
00 - None
(Only required if valve has special
features, omitted if “00”.)
Note: Use J series, 23 W coils
with this solenoid valve.
1 2 3 4
SV4 10 (V) C
5
(*)
7
**
8
****
9
*
10
00
8
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
36D - 36VDC
24A - 24VAC
115A - 115VAC
230A - 230VAC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
*Optional arc suppression diode.
6
(F)
Dimensions
mm (inch)
Torque cartridge in steel housing
45-54 Nm (35-40 ft lbs)
Note: When solenoid valve
is ordered as cartridge only,
coil nut is included.
Installation DrawingCartridge Only
WARNING
Maintain 5-8 Nm
(4-6 ft lbs) maximum
torque on valve tube nut.
Over tightening may cause
valve failure.
57.1
(2.25)
9.5
(0.37)
63.5
(2.50)
2X 7.1
(0.28)
25.4
(1.00) Hex
1
19.0
(0.75)
63.5
(2.50)
19.1
(0.75) Hex
20.8
(0.81)
25.4
(1.00)
25.4
(1.00)
2