EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-250.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SV4-8-C/CM - Solenoid Valve
Spool type, normally closed solenoid valve
11 L/min (3 USgpm) • 210 bar (3000 psi)
Description
This is a 2-way, 2-position,
spool type, direct acting, nor-
mally closed solenoid valve.
This valve is used in applica-
tions where the flow needs to
be blocked in both directions
when the solenoid is de-
energized.
Operation
In the de-energized position
the valve blocks flow in both
directions.
When the solenoid is ener-
gized the spool moves allow-
ing the valve to open in both
directions.
Features
Hardened, ground and honed
working parts to limit leakage.
IP69 Tough coil compatibility.
Continuously rated. Compact
design with low pressure drop.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 11 L/min (3 USgpm)
Internal leakage 82 cm
3
/min (5 in
3
/min) max @ 210 bar ( 3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Response times (100% rated voltage and flow) Energize: 27 ms. De-Energize: 24 ms
Cavity C-8-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,27 kg (0.60 lbs)
Seal kit 02-160777 (Buna-N), 02-160778 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
Performance Data
Sectional View
Pressure Drop
Cartridge only
Port 1 to port 2 or port 2 to port 1 energized
2
1
Pressure Drop - psi
50
100
150
200
250
300
4
8
12
16
20
Pressure Drop - bar
0 4 8 11
Flow - L/m in (21,8 cSt oil @ 49°C)
0 21 3
Flow - USgpm (105 SU S oil @ 120°F)
2
1
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-251.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SV4-8-C/CM - Solenoid Valve
Spool type, normally closed solenoid valve
11 L/min (3 USgpm) • 210 bar (3000 psi)
Model Code
1
Function
SV4 - Solenoid valve
2
Size
8 - 8 size
3
Seal Material
Blank - Buna-N
V - Viton
®
4
Style
C - Normally closed
5
Manual Override Option
Blank - No manual override
M - Knob type
For valve dimensions with manual
override option installed see page A-980.
10
Connector Types
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Flying lead
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
11
Coil Series
S - 8 series, 20 W
For coil part numbers and
dimensions see section C.
12
Special Features
00 - None
(Only required if valve has special
features, omitted if “00”.)
1 2 3 4 5 6 9 10 11 12
SV4 8 (V) C (M) (F)
7
(A) **** * S 00
8
**
Code Port Size Housing Number
0 Cartridge only
2G 1/4" BSPP 02-160727
3G 3/8" BSPP 02-160728
4T SAE 4 02-160730
6T SAE 6 02-160731
8T SAE 8 02-160732
See section J for housing details.
8
Port Size
9
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
36D - 36VDC
24A - 24VAC
115A - 115VAC
230A - 230VAC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
*Optional arc suppression diode.
6
Filter Option
Blank - None
F - Filter screen
7
Valve Housing Material
Omit for cartridge only
A - Aluminum
Dimensions
mm (inch)
Torque cartridge in
aluminum housing
34-41 Nm (25-30 ft lbs)
Note: When solenoid valve
is ordered as cartridge only,
coil nut is included.
Installation DrawingCartridge Only
WARNING
Maintain 5-8 Nm
(4-6 ft lbs) maximum
torque on valve tube nut.
Over tightening may cause
valve failure.
•
– – – – –
50.8
(2.00)
44.0
(1.734)
2 X 7.1
(0.281)
50.8
(2.00)
3.4
(0.13)
38.1
(1.50)
15.5
(0.61)
2
50.8
(2.00)
1
22.2
(0.875) Hex
19.1
(0.75) Hex
1
19.1
(0.75)
